because huntsman firmware dont support dailing tplink usb modem model protocol

weird, my Asus Fonepad connected to MR3420 Hunstman Red but no data. All PC, Note 3 and Lumia 520 no problem.

did the huntsman able to detect your asus fonepad ?

at Network - Wifi tab, yes it show my fonepad is connected.

General Information
Modem :huawei E3276

Provider :-

Network :LTE

Communication Port :/dev/ttyUSB1

Signal Information
CSQ :31

Signal Strength :100%

RSSI :>= -51 dBm

ECIO :-32 dB

RSCP :-145 dBm

Cell Information
MCC MNC :- -

RNC :--

LAC :- (-)

Cell ID :- (-)

Maximum Qos :--

___________________________

help please..is this some kind of error?

100% signal...but cant connect..and no info on cell

instanet 4g

hi all sifu~ i am using E398 with celcom 1 Malaysia. When i direct plug in the dongle to my pc, i can reached 60Mbps download and 15Mbps upload in LTE only. when i plug into the TR3420 and point to the same direction, it is very unstable, max can reach 15Mbps only, but sometime it will become 1Mbps worst need to restart and i have to try my luck whether i can get back to the normal speed.

Now most of the time it have 15Mbps download speed on TR3420, but 0 upload speed when i try to upload something it will just stuck there.

I am forcing my E398 to run 2600 band and LTE only, if not i can only get 0.5Mbps which is very very slow. I play around with:

All version of Rooter
Changing the E398 band around E398(find out that 2600 band and LTE only is the best)
Tried my friend E3276 turn out that it is worst than E398 on both direct plug in to pc and plug in to 3420 that follow the setting according to the first page

now i am very blur which setting should i keep any advise?

thanks in advance

The MR3420 hardware is not good anyway

If you want 60Mbit shared, then use reverse tethering from your PC to your router
Google for it.

Paid solution, I heard some D-LINK router are great now. Or maybe you want to play with AF23

Huawei af23 stable or not?

Stable i think, but wireless range is shorter cause no antenna, lack many advanced features, like IP reservation, much hotter, ect.
while im using e369 + TLMR 3420 which sometime the 3G modem will disconnect itself without any reason whatsoever

which one? DWR 921 or the latest Portable AC LTE router?
either one seems good too, but the AC router looks very cool

Haven't seen one in local store, distro here very slowpoke cause not much demands.(fiber here very cheap and fast + mobile telco service very lousy lol)

have anyone used the new e3276 LTE modem with stock firmware?

especially on mr3020

it is kind of depends what batch is your E3276,

some batch able to support MR3020 stock frimware direct plug and play,..

others, need to use Rooter openwrt firmware

my network do not have any BT download, no CCTV setup.

but i found in my Bandwidth Monitor, upload is around 4GB and download only 1GB,
how can i check use for what?

Thanks

i have used celcom 1M with Sierra 313u connected to TL-MR3420 v2. and it seem like when the usb is connected to the pc, it is much faster and stable compared to connected to tp-link router. is it possible to make the connection more faster and stable? because before this i used maxis and the connection is fine. thanks.

This post has been edited by ira03: Mar 21 2014, 09:47 AM

make sure your V2 are using latest firmware up to date -> firmware version 121206 ( there is 2 more beta version firmware too )

V2 :

130227 beta version -> here

130314 beta version -> here

or u can try to flash Openwrt Rooter -> here

This post has been edited by chuahcs79: Mar 21 2014, 03:07 PM

thanks. i have installed openwrt and it seem like the speed is even slower than before. can i unistall it?

just flash back to stock firmware,.

flash to oldest stock firmware first before you flash to latest version,. otherwise u will get error

stock firmware oldest version u can get from tplink websites

This post has been edited by chuahcs79: Mar 21 2014, 10:38 PM

i'm sorry. i'm still new to this. can you teach me how to flash back to stock firmware? thanks sifu.

This post has been edited by ira03: Mar 21 2014, 10:51 PM

first of all,

download TL-MR3420_V2_120703 from here

go to 192.168.1.1 ( in any browser )

login the LuCI interfaces

Go to System -> Backup/Flash Firmware > Reset to Default

Then go to flash new firmware image,

Untick keep setting,

Browse to tplink original firmware (TL-MR3420_V2_120703 u download just now > flash

and wait for 1~3min,.. (router will be bricked if sudden power off or let power cut off in this period )

go to 192.168.0.1 ( back in stock firmware default login username admin and password is admin too )


then from there u can either :

- upgrade to latest stock firmware 121206 version or beta version above from 120703 version

- direct setup your stock firmware

enjoy

This post has been edited by chuahcs79: Mar 21 2014, 11:30 PM

so i can do it wirelessly or need to connect to LAN? thanks sifu