PC Work, i gonna pm u later
finaly get my hand of HP 895
i wanna slow things down but i scare u fly back there
then i have no idea who i get cable from

anyway details is in the pm

Hi PCWork, you do have free time to do customize cable? Might need your expertise to do some RCA cable.

i am going back around 26th or 28th. =)

i will miss u

but i some how confirmed will come back for futhur study at may/june
that's why i MUST go back this time, really miss my home now.. =(

home sweet home
sad news for those who wan custum made cable

gotta learn to diy cable after finish my study

u gotta get a set of hakko soldering tools jz like wat i told u last time

wait january 1st
and u will having a hard time ,
i will owez looking for u

don't know why. while comparing hakko or goat, i prefer goat....
just my personal habit.. i found i solder with goat soldering gun can be more accurate, small, and fast...

there's a special heat gun. i bought at jalan pasar for RM 135..
for shrinking the tube nicely and fast. =)

goat? err.. never heard before..
actually i'm looking for alternative too.. hakko presto is too expensive..

how much is goat gun cost? and the tip's measurement? 20mm?

picture? have any cheaper alternative coz i only use this for making cable..

This post has been edited by yeahs4.1: Nov 22 2006, 05:56 PM

er.. picture of heat gun?
don't have oh
never take it.

goat? i buy for around RM 130 too... =)

nvm about the picture..
coz if use solder iron to shrink the shrink tube, the surface is gonna be very rough.. gonna lose the professional look..
but if use hair dryer it gonna take ages..

last time, my first batch of cable is using solder gun one.
i suggst you use candle...
heat it above candle and turn it around, try to do it on a pen instead of the cable first, until u can shrink it nicely. then use it on cable.

hmm.. good idea.. thx mate

Actually... why would the cabling business be forced to stop after he goes back? Its not like he has to COD all of the time... pos laju lah

Maybe I should just poslaju my K340 to you for the recable

the problems is, when i practical. i wont be as free as now. some more . in order to acquire parts, i have to order from kl. buyer have to bare extra rm16 for postage in both direction. not worth it.
and i seriously doubt i have time that time. as many things coming up in my schedule right now for the time i practical.... i even worry i can finish the things i should do before i finish my practical...

picture time..

jz now i took about 40 minutes doing a 2 meter 3.5mm stereo to 3.5mm stereo for my friend. took me quite a lot time coz i used L-4E6S and rean plugs. i jz know that the interior part is very small but canare cable is damn fat.. finally, finished soldering, heat shrunk it. perfect. thx for pcwork's idea using candle. it worked pretty well..
p/s : i dun think i wanna make any mini to mini interconnect using rean plug + starquad in future







This post has been edited by yeahs4.1: Nov 27 2006, 09:19 PM

now u know its suffering? lol

rean plug only.. i seriously prefer F-12.. from now on.. seriously!