Hi Bro...

IINM me rber yu recently did the DIY Braided Brake Hose thingy on yr BLM...
Correct, Bro?

If so, me also rber yu were using those yellow cable ties (fr Mr DIY or similar?)...
How are they now? Still in place?
Any broke/dropped off?

In ZTH, seems those dun last...tahan only few weeks...
True?

Best wld b BLACK cable ties...seems of better Q...
Used those in my ole DIY on ole gen Saga...
However, very hard 2find nowadays liao...

ah bang ini sudah kena tetak la. .
alignment rm15-20 aje
balancing & tyre rotate = 5 / biji aje.
total max. pun ~rm40 aje.
how he get 160 ?
SC standard = 10k per alignment + balancing & rotate.

its a "good practice" to do alignment every 10k but don do also ok 1.
no paksa

They one shot do 4 times for you

Hi Bro...

Perlu algnment sbb dah sampai 11k Km?
My Gaga din hv 2do even @20k Km....

Lagipun, tambah RM160 for juz alignment?
Ni chop off kelapa la!!
Normal alignment <RM20 saje...

well said!

Last 2 weeks or so when I checked it was still OK....

thanks for the tip bro..all i know is peak torque at 4k rpm..but now using 4-2-1 extractor make the torque come early i think around 2.8-3.5k rpm got better pulling power than before..that time i just want to test my high rpm torque only..noob shifting bro..actually i know rev cut at 6.2k rpm but ter-accidentally shift early lol..our flx rpm oso not that accurate..haha

Time to get RSM....

Ruby, I do every 20k when I rotate my tire.

Tks a meg 4yr reply, Bro!

Me oledi bought 2 pks of yellow cable ties fr Mr DIY...
ATM half decided whether 2go ahead with DIY or not...

PRO-RS SS braided hoses are almost RM400 now!!

I can say there is no exact guide when to do alignment and balancing.
a good magician will come in handy.

an inexperienced alignment magician may possibily make ur already bad alignment to even worse.
not necessary do alignment then = good

TitanRev just changed.
"he act pig eat tiger"
see his car mod here n there. . not genuine poor fag cheap jing saga driver
poor woof woof SE, even a standard is more MOD-ed that you

bros, thanks 4 all the responses...i will skip the alignmnt thing..

hi all. last 2 week i sent my SV to SC at proton sentul jalan pahang.

total lost RM190.

what im confuse is they said my car next service at 10K. not 5k as you guys told here.

so do i need to go there @ 5k?

i tot need to service @ 1k, 5k, 10k rite?

so how?

and 1 thing..

what is the size of normal rear speaker for SV? i think i want to replace it with more powerfull speaker. i want the same size as standard speaker. (no need to cut the board)

No need 400 la. You go to zth marketplace find seller andysky. I got mine ss hose IMP brand 290 only DIY install.

I really cheap Jim many stuff also DIY one. Only rich fag pay money give ppl do. hahahaha

I mau tengok cheapjing DIY transplant VR38DETT into Gaga

but i not rich also, how?

Decarb = Decarboxylation is the process of removing the carboxyl group, in the form of carbon dioxide and water vapor, in order to cause cannabinoid conversion to their more active, delta forms. It is essentially 'drying out' the material, even beyond being smoke-dry, and this can be sped up with gentle heat (it occurs instantly when you combust and smoke your material, but also degrades and destroys some potency in the process... this is why edibles, and vaping, can be a more efficient use of your meds).

http://forum.grasscity.com/incredible-edib...ecarb-weed.html

you upgrading house gate right and getting Inspira also...still not rich??? Hahahaha

THE CLASS OF 13

Not bad bro, not bad.



Both attempt also very consistent. However, the 2nd run got faster timing, but more wheelspin. In actual result, the 1st run should be faster than the 2nd. No more pointer for you on clutch work. Pretty awesome already. Shifting timing can be improve(do it faster I mean), say easily cut down another 0.5seconds up to 3rd gear. Understand FLX shift lever bushing is quite tight, you'll need to shift harshly to get good timing.

Gatal want to record another round

But fook that, I'll record my Sempah + genting

This post has been edited by ericmaxman: Nov 1 2013, 07:39 AM