just got my system for a week..and having problems while stressing the rig.. my system keeps failing on memtest86+ on test 5..and failing orthos with an error code saying something like "rounding was 0.5 expected less than 0.4" ....

here's my specs:

Core 2 Duo E6700
ASUS Striker Extreme
2GB Corsair DDR2-800 C4
Enermax Infiniti 720W

can anyone tell me what could be the problem? i've tried manually setting the voltage for vdimm and vcore but it doesn't seem to help at all...

for SuperPi use this setting can la. Value ram for record setting daily use.. dunno when will go to heaven

yup the vdimm loh..............

daily use 423X9 3-3-3-9 using 2.35vdimm

@rlhc17

from your sig,


seem like Team Elite can go higher clock. how much u feed it? cant wait to try my elite. hope it's same species as yours

This post has been edited by toughnut: Jun 12 2007, 07:49 AM

Crucial PC-5300 value D9GMH , DDR1100 4-4-4-12-2T at 2.45Vdimm quick test PI 32MB ok...


Attached thumbnail(s)

haha.. faster than mine DFI P965 izzit?

This post has been edited by yehlai: Jun 11 2007, 08:21 PM

Team Elite 2.35 ~ 2.40vdimm ddr1150
hope urs can do the same too

He's using Asus P5N32-E SLI 680i.

Thanks Hyde, i think your pair is much better.... Probably 2.30v? Try it out

@tAmp0i

Dude. can u post some sisoft sandra mem band at 3-3-3-9 1T? i would like to see how it performs...

This post has been edited by campsol2k: Jun 13 2007, 06:16 PM

Hyde's one only need 2.3 vDimm.. ? thts nice.
Glad ur pair can be clock to 1100MHz.

Erm, I haven't try it out yet. tAmp0i's just assuming. Will try when free. Kinda tired these days after work.

guys is the D9 reli run so hot?
i touch the heatspreader of my crucial with bare hand, it is reli so damn hot, like touching boiled water

Nope, it's not because of the D9 chipset.
It's because of the crucial ram themselves.

Crucial uses Levin PCB that is known for it's "hotness"

All Crucial Ballistix & Crucial Ballistix Tracer uses Levin PCB.

Duno wan how to help u bcoz u haven giv the " stress " u made . Sumthg like V or Mhz

i've put everything running on auto .. the problem still presists....

Let say u formatted ur comp , ur OS running well , ur BIOS is up-to-date , ur HDD is PATA under good condition , if not PATA then SATA wif superb good condition , then ur PSU new and good condition , reset BIOS after take out all parts still cannot settle it ...

Thn maybe ur RAM got error inside . If not try get another 1 see . Sumtime u need to refer to mobo web/technical forum for certain settings .

yep...thats what i've done... got temporary another pair of rams and it passed through memtest without a hitch... anyways is there a compatibility chart for crucial rams ?

yup . Ur mobo fully supported by all performance series from crucial , dun worry .

But i suspect ir ur RAM probs not compatibility probs . Try chg the sets

use dis for crucial RAM
http://www.crucial.com/store/listmfgr.asp?cat=RAM

This post has been edited by duo8668: Jun 14 2007, 01:24 AM

anybody has experience oc corsair value select 667mhz ?i want to know how far it can go..thx..