Dont need to do so, just check my siggy anytime u want

hi guys, i hav jus changed into a DDR2 platform and get myself a crucial ballistix pc5300 from shawty
however, i cant even overclock the ram to be stable @ 800mhz 4-4-4-12 2T, i even tried 2.2V on tat timing n frequency, but it failed in memtest86
any idea wat could be the problem? issit because of i m using a Pentium D and not a core 2?
other spec can refer to my signature
thanks for any help, newbie in intel platform overclocking

Stable enuf to run Super PI 32M ?
U also can try 4-5-5-12 or CL-5 timing for more stable o'c setup.

never tried super PI, but i thought memtest shud be the best stability test for memory?
4-5-5-12 failed 2, CL5 same....
i wonder the problem could be come from my motherboard, not sure, jus my sixth sense

Now that's weird.
I've used the same ram with you before i've upgraded my ram to Ballistix PC6400 DDR2 800MHz 2GB Kit.
Before this, i've used the Ballistix PC5300 DDR2 667MHz 2GB Kit overclocked to 800MHz @ 4-4-4-12 @ 2T @ 1.95Volts, Memtest86 stable & Orthos stable 12 Hours.

I don't think it's your processor.
I think it's more to your motherboard liao.

some update : the ram was able to go up to 1000mhz @ 4-4-4-12 2T on a XFX 680i LT with core 2 system. boot vista n pass super pi.
going to claim my mobo already i think...

Thanks to karom for this G.Skill 2GBHZ kit, at the moment tested with tightest timing possible 3.0-3-3-9-1T at Vdimm 2.38v.... Sub-timings "auto". Personally i think sync 1:1 400MHz with 1T is able to outpaced 550MHz 5-5-5-15-2T

This post has been edited by tAmp0i: Jun 9 2007, 12:55 AM


Attached thumbnail(s)

KVR 2.1v.. will try some more timing later...




Attached thumbnail(s)

hi..guy..hw abt Adata? i jz brought 1..

really mobo ar???
how can u know at XFX 680i working??
already test it??
try 5-5-5-15....
maybe can run higher frequency....

Nice ram u have there. 400Mhz at CAS 3 O_o


-pWs-

tight it a little more.. 2.1v
not 400.. it's 430..


Attached thumbnail(s)

Haha... Sorry... din see properly
430Mhz at 3-3-3-9
Damn nice, my xms2 need 2.2-2.3v already


-pWs-

try my previous timing lor..applied at both my crucial and corsair..managed to hit DDR833 4-4-3-8...didnt try CL3 yet..will try after my mobo back from RMA..

8tvt may i know what chips on the KVR? GKX or GMH

This post has been edited by taxidoor: Jun 10 2007, 01:52 AM

it is my brother system, with E4300 on the board
i m damn upset with my system, cant even run 770mhz 4-4-4-12 2T

D9GKX.. but the weird thing is... why no 333 timing report in cpu-z
even in everest don't have..

KVR D9GKX @DDR2 904mhz runnning 3-3-3-9 with 2.55vdimm


Attached thumbnail(s)

Why sad bro? That timings is extremely tight already

perhaps it because of the high vdimm on value ram?