its 2x1gb because i know that no 2x2gb kits can do that unless you got lucky la haha

Just wonder do you guys know what chip those kit (Corsair and GSkill)?

that geil f2-8000 (blue heatspreader), i remember it's actually ddr2 800 but rated as 1066..
it's a hot budget 4gb oc kit.. priced damn low yet some managed to get it over 1100mhz
but heard it's trfc need to be loose, while some board having issues with it due to default trfc too tight.

anyway, i'd love to see if ones actually-really-fully 100& utilize 1200mhz ram speed by 1:1 which is 600fsb.
didn't see any in here before, or did i missed out?

-









btw, bump in clocks w/ fsb stays.. the memory speed shouldn't be affected right?
there seems to be slight increase on memory speed as above, though fsb stay.

and, wat's DIMM Clock Fine Delay?
it seems to alter itself..
as previously i got 6T on blanks & 11T on occup.
while now 7T on blanks & one 11T one 12T on that 2 sticks.
why is that? somemore diff. on both dimms >_<

600fsb 1:1 eh?
though theres few cases already but overall the percentage still very low,and performance is another thing
not easy,but need to get few things right

hint hint 1200mhz at 400fsb. lowest trd is 5..
1200mhz at 400fsb tRD 6 is just slightly slower than 800mhz CL3 tRD6.. and slower than 1000CL4 trd 5

---

Added on June 17, 2008, 8:02 pmoh yeah coolice.. waiting for bios 0603..
got issue at 600fsb 1:1..



This post has been edited by cstkl1: Jun 17 2008, 08:02 PM

Godlike ram Ocer here

bro need suggestion

wanna to buy
team xtreem 800 2gb kit
team xtreem 1066 2gb kit
ocz reaper 800 2gb kit (is it hit the gemin 2 cooler any suggestion)
where is better interm of oc n more features

actually my target is team xtreem 1066 2gbkit

my rig
amd phenom 8650 2.3ghz
dfi dk-m2rs
his iceq3 turbo 3870
psu strider 1kw

This post has been edited by Evil Oracle: Jun 18 2008, 07:34 AM

among those three, u should avoid ocz reaper. they max out at 900mhz. ive even try to consult wif ocz guru in their forum and this is what they said. get team xtreem instead.. sure u wont regret...

k bro
shoudl i take
team xtreem 800/1066
plz advice
tq

This post has been edited by Evil Oracle: Jun 19 2008, 03:03 PM

get the team extreem cl3 ddr2 800 version or the teams that can do cl4 on 1066

Get Xtreem 1066C5.it is not bad.Similar to CL3 Xtreem,just need more vdimm.

i am trying to get cl4 1066 on my current team extreems... but i could only reach up to 1044Mhz on CL4... hmm any advice.. if i cant touch 1066Mhz CL4 i would buy cstkl1s rams..

Hi all sifus.. Wanna ask:

Crucial Ballistix DDR2 PC2-6400 800MHz 4GB Kit [2X2GB]
Timing: 4-4-4-12
Voltage: 1.8Volts ~ 2.2Volts

^^
Is the above a good buy? Wanna upgrade to 4GB. Can it go to at least 1066MHz on CL4 at 4-4-4-12?



Also, what's max. vdimm for crucial?

This post has been edited by Archaven: Jun 19 2008, 04:25 PM

1066Mhz cl4 can probably be only done by d9gmh and d9gkx and all 4Gb kits dont carry this variant of micron chips.. so nop it wont.

ok thanks alot a1098113 .

i was wondering what RAM stress tool anyone use? memtest86+? prime95 blend test? OCCT RAM test? hci memtest?

i've seen many can achieve high RAM OC. but did it pass memory stress test?

i've tried OCCT stress test RAM for 2 hours and it passed certifying it stable but when i ran HCI memtest, it produce error almost instantaneously.

i'm currently testing 1000MHz at 4-4-4-8 with 2.3vdimm and hci memtest failed at 450% coverage. . is hci memtest is a reliable memory stressing tool?

This post has been edited by Archaven: Jun 19 2008, 07:17 PM

oh did i forgot to mention

the biostar tpower i45 has a inbuilt memtest86...at the bios

cool eh..

This post has been edited by cstkl1: Jun 19 2008, 07:39 PM

yes memtest for windows a.k.a hci memtest i think is very reliable ..

haha, cstkl1 is having a good time with his new board

This post has been edited by a1098113: Jun 20 2008, 10:08 AM

Hi all sifu... i need u all some help ... i'm using Crucial Ballistix Tracer 1066Mhz ... and i set my timing to 5-4-4-4-14 ... my problem is ... why i can't set my CL5 to CL4 ???

its takes a higher voltage around 2.2-2.3V to run a cl4 timing for your ram.. and if u do want to set it, set it in the bios. and remember to work on the Vdimm as well.

just got my Ballistix Tracers from shawty last nite.

tested them, and found out that they are not as good as it used to be

@2.2v i can only push up to 458MHz (916 DDR, 1:1) with 5-4-4-12.cant even boot at that speed with 4-4-4-12 .. while my D9GKX can do it absolutely with no sweat @ 2.0v...

is it the ram or my P35-DS3 is holding it out? tried various tweaking but none helps. Refer to my sig for my specs.

so the rumors that the 1gb modules chips got changed is true then, and high density modules are useless for OC (cant expect more like before - low vdimm @ 9xx)

any comments?

This post has been edited by BlackThyra87: Jun 25 2008, 08:21 AM