Err, soulfly, no offense, but we here are discussing about 3rd party air heatsink...
Not stock heatsink...

But still, damn, stock heatsink with that kind of temps, that's freaking cool...

stock heatsink + AMD pre-applied thermalpaste

no AS5

thermaltake mini typoon here + artic silver 5 on amd here
amd 64 venice 3000+
1.425v
idle:28
load:32
sori

This post has been edited by sucka3: Nov 22 2006, 01:07 AM

Ayak list also ur type of processor and temp idle and load

quite cool

must be your system had good air flow.

have you try O/C it?

Opty 146 @ 2.7Ghz 1.425V @ idle-38C Load-44C (Room temp 26-28)
Cool Age Full Copper + 4 Heat Pipe + AS5 + K8 original FAN

This post has been edited by johnny_loo: Nov 27 2006, 09:40 AM

LOL ! I've just get a Infinity cooler but my temp is still freaking high ! Stock E6300 at 63c LOAD !

Stock at 63c? I am pretty sure u didn't install the heatsink correctly, did u push the clips till u hear a "click" sound for each of the 4 push-pins? My E6300@2.8ghz using Ninja load also 55c only

That's weird....I'll try refitting the HS..BTW my temp are Recorded in TAT.(no aircon)

BTW...Is all E6300 the same ? (Heat) and should i change the thermal paste and fan given with the infinity ?

This post has been edited by king99: Nov 27 2006, 06:03 PM

Did u measure the temp with mobo software or CoreTemp?

coretemp give the same and Easytune temp is unreliable.

I've just reinstall the heatsink...seams 1 pin is not fixed....But still 58c at stock .

This post has been edited by king99: Nov 27 2006, 08:10 PM

Intel core 2 duo e6300 1.8ghz @ 3.4ghz
using SCYTHE INFINITY fan..

idle 54c
load 60c.

Wonder why my temp soo high w/o OC in TAT...wad ya enviroment temp ? mine 30c+.

This post has been edited by king99: Nov 27 2006, 10:22 PM

ok u all got put thermal counpound b4 u put the heatsink nt?

Offcourse la...

Thermal Compound is important to make sure the heat is conducted to the heatsink properly...

No heatsink comes in 100% pure flat base, so you need that thermal paste to fill in the those unflat area...

Capiche?

Ya....using the given one.

kk.but try dun put too much u know?Also check yr casing got good airflow or nt..

Spread the Paste evenly......I think my case have a good air flow since i got 2 12cm input fans and 1 12 cm output fan.......Look's that mine have the wrost stock temp ever.

Is all your readings in TAT ?

This post has been edited by king99: Nov 27 2006, 10:34 PM

icic..i using core temp to check my temp..btw dun use yr hand to spread yr compound.I believe u dun use yr hand rite?

I use my hand...It's is wrong..New to thermal usage