me wanna join the list ......
2uk3y ~ AMD Athlon64 3000+ @ 2.6Ghz ~ AC Freezer 64 Pro ~ Idle 39�C, Load 49�C

I will only post those that uses aftermarket heatsink...

Thanks!!!

More please...

yo.....hi there guys.....Im using AMD Athlon64 3000+ @ 2.52ghz with Thermaltake Big Typhoon....Idle @ 31c , Full Load @ 42c

Hey guys, have some stupid question here...
Does different motherboard produces different temperature to the processor?

Ok, here the story:

Me and my brother uses the same processor that is, Pentium 4 3.0E

Ok, my brother uses his 3.0E while in an ASUS P4P800-X and the temperature he achieved in stock speed in idle mode is 33�C

And i've use the same 3.0E with an ASUS P4C800-Deluxe and the temperature i've achieve while in stock speed in idle mode is 36�C...

We've used the same heatsink, that is: Hyper 6+, the same casing: Cavalier 3...

What could have cause the different in the temperature huh everyone?
Mind to give me your opinion?

erm...did he oc like u did?? 3.0 to 4.0 @ 1.6vcore???

The one that i've post earlier is the temperature that is under stock speed...

Me in stock speed:
3GHz : 36�C Using Hyper6+

My Bro in stock speed:
3GHz : 33�C Using Hyper6+

What could have cause this diferrences of temperature?
Could it be b'coz of the differences of motherboard?

This post has been edited by sHawTY: May 31 2006, 01:54 AM

Both temp sensors are not same....reading also won't be same. In fact, all the temps reported here won't be same if u put on other mobo.

yeah not same..... if same mobo still cant get same temp lor....
different 3c only hehehehe

like davidletterboyz said....the sensor temp are not exact...is an approximate temp only.
btw...i think that 33c for an idle is too low and not accurate. our area ambient temp mostly ady near 30c sometimes 32c so i think is quite imposible lar the temp...my NB temp oso more than tat...

AMD 2500+ XP @ 1.61Ghz
CoolerMaster Jet 7+ @ 3889 RPM
Idle: 44C
Load: 55C

damn freaking HOT la!!! plus mayb my room is HOT oso...

here's mine
siauann ~ Pentium 4 2.4C @ 3.0GHz ~ CM Hyper 48 w/ vantec 92mm ~ Idle 37/38�C, Load 49/50�C

@sHawTY
i like ur temp..was wondering wat fan u use it on ur hyper 6...its rare to c prescot on such nice temp... i like it...ur full load only 4� difference wif idle...so nice ler...btw those full load temp is got frm priming test? mine is frm priming...

stock hsf kenot join meh

i thk u wont hv same temp even tho u put in same mobo...
i thk its the thermal paste...u cant apply same amount n same spreading on evry proc...jz my opinion...feel free to correct my point...further more different batch of proc i guess..
anyway i do thk tat ur prescott temp is good ler...under 40�c idling....i tot prescott oways the hot ones....even my northy no match wif ur temp...izit cz of ur hyper6? or the fan?

hey im newbie about these stuff. my cpu is sempron amd 2600, idle is about 42/43 degree but how to see the loaded reading?

do u mean loading like playing games etc? i use stock fan bcos its supersilent <18db very silent. i can sleep with my pc on bside me. pls advice , the loading means play game issit? i dont want to oc but i want to know my loaded temperature too pls advice thanks

Got some new air cooling solutions want to share with all....

before: TT Bigwater SE + TT Aquarius II VGA Block (At 1600rpm for radiator)
CPU: 32-40
GPU: 53-63

After:TR Si-120 (1100rpm)+ AC Accelero X2 (Ati Tool at 36%)
CPU: 24-30
GPU: 50-58

30C?? that's freaking cool

omg... ur temp so coooool....in aircon room ka?

Waw! I like to share, here :-

P4 2.6C @ 3.2Ghz + Thermaltake POLO 735 Rev.2 + ArticSilver5 thermalpaste

Idle @ 53'C
Load @ 60'C

u can use Prime95 / SP2004 / Pi to test it.....

off topic.....ur signiture, "COOL!!!" is it ???

This post has been edited by 2uk3y: Jun 2 2006, 09:08 AM

thank u so much. usually the test is run overnight?