The Best Cooling System i ever Had !!! INTEL STOCK COOLING !!!!


P4 630 3.0GHz at 3.4GHz With INTEL Stock Cooling HSF Only Reads About 32 celcius Idle and 42 celcius Load ! Remember , my room do not have any Aircond , But i have 3 12CM Fans and 2 normal fans in my casing !!!

The Best Record , 27 celcius Idle !!! while raining outside my House !!!


Unbelieveable ? Beleieve it ..
My friend saw it and get Shock with the performance in my Home .

Anyway Get 86Frame Per Second with my Counter Strike Source Video Stress Test with my 650Mhz Overclocked x1300 Gpu and DDR400 System RAM ... All Voltage are Stock and all gone very well ...

Believe me , if your casing is not cool enough , You cant get My result on Air Cooling !!!

The Need of Big HSF ? No Way , I tried it before and get 35celsius Idle and 48 at LOAD with the same environment . (Cooler Master Hyper 6+)

Usually Crowded Casing and Lack of air flow is the Main "HEAT " Issues here .

HaHaHA

I've heard about the same thing also...

From Tom's Hardware Guide

But no mean proof...

Tom's just say that Intel stock heatsink is the best...

Can anyone here prove that?
Rather than the prove that came from "RIGMASTER" 

Wahlao...
2.6B so cool meh?
The original FSB is what aa? 533? 

Yup, you're damn right...
The cedar mill cores is much cooler than those precott cores...
It produce much lower heat than prescott...

That's because it uses much lower voltage than prescott... 

the orange one spins at 6k+ rpm.. the blue led is around 2.5k rpm( not sure but its not reaching 3k tho ) max..

Freak

Pls help !!!

I have AMD Sempron 2500+ socket 462 running in MSI KM4M-V Mobo, Seagate SATA 80GB, I GB Kinston DDR 400 RAM.

When I used the HSF supplied with the Processor, I get 61 degree C. The fan is spinning at 4500rpm.
Ehen I changed to Cooler Master Jet 7+, it still give a reading of 57 degree C.

If I am to compair eith the other forumer, I have a very hot machine.

All readings are by Sensor View Software. The System is stable at 36 degree C and the HDD is at 39 degree C. using both the AMD HSF and Coolier Master Jet 7+ All side panels are removed with my ceiling fan running.

Any suggestions ??? or ir the Sensors View Software is no good ???

I think hyper 6+ is better... 

one question...
those huge ghue heat sinks.
i think it's hyper 6+.... so darn heavy.. .
the other day i saw it in sri com....

how the heck can the mobo stand? i mean... when u attach it, the heat sink will be horizontal...
won't that cause LOADS of stress to the mobo??? heavy ma!!