Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Lazyman Lazyhouse, Road to the Lazyland

views
     
TSSaton666
post Jul 23 2013, 01:02 AM, updated 12y ago

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Get the key early June, or was it late May. Does not matter much now. Lay back a bit, now almost end of July and the drawing still not yet approved by the local authority. Adui...

Long story short, once the drawing been approved, hopefully before raya. Otherwise another month of delay can be expected rclxub.gif

Since there were no renovation started yet, so only share some costing incurred to date.


House dimension: 20 x 75 (Double storey)


Damaged so far:

Legal Fee + Stamp duty = RM 29,500 (Property SPA + Loan SPA)

Drawing for local authority = RM 2,300

Valuer fee = RM 800

Waste bin = RM 560

TNB = RM 313 (Open new account)

Cukai pintu 0.5 tahun = RM 255

Syabas = RM 100 (Open new account, forgot exact amount Orz)

Title search = RM 50

Photostat = RM 10

Damage so far = RM 33,888 (so huat, so gud)




Damage (to be):

Front extension 7F + Balcony + 1st floor concrete slab roofing

Construct carporch 12F = RM 14,000

Construct 1st floor concrete slab roofing = RM 8,800 (need to recheck, if this is the balcony, amkan!)

Hack Ground Floor wall & roof = RM 4,500

Construct Main gate wall 16F + 3F + 1F = RM 3,300

Casement window 2 sets = RM 1,664

Door = RM 600

Dismantle 1st floor 4x4 window + install new window = RM 500 (only labour)

Subtotal = RM 34,540


MISC (Lazy to categorize)

Install new roofing on top of kitchen area = RM 2,800

1st Floor plaster ceiling = RM 2,100 (800SF++ if not mistaken)

Install & Supply metal door frame x 4 = RM 1,800

Install & Supply 6x4 sliding window x 2 = RM 1,664

Kitchen wall & table top tile hack = RM 1,600

Dismantle wooden door frame x 4 = RM 1,050

Hack wall @ master bedroom 15F x 9F = RM 1,000

Hack wall near staircase 10F x 9F = RM 800

Dismantle existing roofing on top kitchen = RM 600

Toilet plaster ceiling = RM 560 (Total less than 180SF)

Toilet tile hack = RM 450

Dismantle existing window 6x4 2 sets = RM 300

Subtotal = RM 14,724

Flooring = RM 10,000 (1,600-1,700SF)


No quote yet (Budget)

Solar water heater + pump + shower set x 2 = RM 6,400 (Ouch)

Piping re-route + hotwater piping for 2 shower = RM 5,000 (waiting for plumber official quote)

Aluminium door x 7 sets = RM 4,200 (highly under estimate whistling.gif )

16F mild steel folding main gate + motor = RM 4,000

Security door package 1 + 1.5 panel = RM 4,000

Kitchen cabinet = Rm 3,000

Grills whole house = RM 3,000

WC + basin x 3 sets = RM 3,000 (material only)

Toilet water proof x 2 + Tile/WC installation x 3 = RM 3,000 (RM 600 for each toilet water proof was quoted)

Anai anai = RM 2,000

Car porch tile laying = RM 2,000

Electrical wiring = RM 2,000

Ground floor casement window = RM 1,500

Tile for 3 toilet = RM 1,000 (1 x 2 mostly, less than 180SF in total)

Car porch tile hacking = RM 1,000 (400SF)

Car porch punya tile = RM 800

Subtotal = RM 42,900



Grand total = RM 105,164

Over budget liao rclxub.gif Need to part time at jalan alor...

Still lacking:

- TV cabinet
- Wardrobe
- Lightning
- Switch

no eye see...
TSSaton666
post Jul 23 2013, 01:03 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Floor plan for the renovation.

Should be getting the approval from local authority on Monday.

Removed


Saving

1) Solar water heater + pump + shower set x 2 = Save RM880 (Budget RM 6,400 vs Actual RM 5,520)

2) Piping work + hotwater piping for 2 shower = Save RM 2,500 (Budget RM 5,000 vs Actual RM 2,500)
*** Include WC & Basin Cabinet installation.

3) WC x 2 + basin cabinet x 3 + Tap x 3 = Save RM 295 (Budget RM 3,000 vs Actual RM 2,705)


Over spend

This post has been edited by Saton666: Dec 30 2013, 09:32 PM
TSSaton666
post Jul 23 2013, 01:04 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Reserved for future posting
TSSaton666
post Jul 23 2013, 01:05 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Updated cost dated 21 August 2013

» Click to show Spoiler - click again to hide... «


Subtotal RM 101,164

***OMFG. All amendment deleted accidentally. Need to start from scratch. Speechless


Updated cost dated 8 Sept 2013

» Click to show Spoiler - click again to hide... «


Subtotal RM 106,614

***Jeez. The plumbing work & wiring work looks likely to overshot 100%++. This is the price to pay for buying a subsale unit. rclxub.gif

As you come along the renovation WIP, a lot of issues will pop up here and there and burn your pocket.



Updated cost dated 13 Oct 2013

» Click to show Spoiler - click again to hide... «


Subtotal RM 128,109

After taking into consideration of the tiling factor, total cost balloon drastically. And yet gut feeling is that this is not the end but rather only 90% of the finale so...

Sir, welcome to join the RM 150K Club.
And yet the house still looks sucky...

TILE OVERSPEND = RM 720
ASTRO INSTALL = RM310
PAINT BUDGET= RM 2,500 (total 4,800sf painted area x 2 coats = 9,600SF) TO DATE SPEND RM 470

PAINTING PROJECT

RM 470 [NIPPON SOLVENT SEALER 5L, WEATHERBOND SOLAR REFLECT, NIPPON GREY 1L, PAR SEALER 18L, SOLVENT 350ML, MAXILITE 18L]

PAINT BRUSH - RM 25

MAXILITE - RM 62

Dulux Pentalite Brilliant white 20L SP - RM 280

MAXILITE - RM 62

MAXILITE - RM 62

Jotun Sealer - RM 320

Nippon Weatherbond White 20L - RM 290

Nippon Waetherbond Grey 5L - RM 128

Budget>> Assorted dulux colour RM

Masking tape - RM 15

1724

BRICK WALL PROJECT [43SF]

WHT BRICK TILE - 4 BOXES = RM 416
MATERIAL = RM 100 [CEMENT GUM, SIKA TILE SUSU]
LABOUR = RM 400

DOOR PROJECT [43SF]

Nippon gloss white 1L - 4 can = RM 127

Nippon undercoat 1L - 3 can = RM 84

Paint brush x 4 = RM 15

BRICK WALL PROJECT [43SF]

WHT BRICK TILE - 4 BOXES = RM 416
MATERIAL = RM 100 [CEMENT GUM, SIKA TILE SUSU]
LABOUR = RM 400

Updated cost dated 8 Dec 2013

» Click to show Spoiler - click again to hide... «


Subtotal RM 137,273

Updated cost dated 16 March 2014

» Click to show Spoiler - click again to hide... «


Subtotal RM 138,805

Furnishing:

Sofa + Dining + Coffee table + side table + Bookshelf = RM 3,200
Daikin Air con = RM 3,560
CIMA Lighting = RM 215
Fridge = RM 1,399
Kit Cab + Praying table + TV Cab + Shoe rack + 2 unit wardrobe + Bed frame = RM 20,000
Mosquito net = RM 580
MISC Electical work = RM 480
Doorbell + MISC switch = RM 100

Bed = RM 1,000
Water filter = RM 500
Study table = RM 300

7" wardrobe = 2450
9.5" wardrobe = 3325
5" praying = 1600
11" bottom kit cab = 1100
14" 3G top kit cab = 3220
17" 3G bottom kit cab = 2720
5.5" shoe cab = 825
store room door = 350
7" TV cab = 1600

total: 17190

This post has been edited by Saton666: May 1 2014, 01:21 PM
iAlien
post Jul 23 2013, 02:41 AM

Interior Designer
******
Senior Member
1,043 posts

Joined: Apr 2011
From: Klang Valley, Kuala Lumpur


Kitchen cabinet = Rm 3,000 quite cheap also...
how many feet??

got some picture?
genielee_83
post Jul 23 2013, 06:18 AM

Getting Started
**
Junior Member
120 posts

Joined: Jul 2007
From: Ipoh, Perak


rm600 for toilet waterproofing is cheaper than what i imagined.
just toilet? not attached to shower?
TSSaton666
post Jul 23 2013, 09:07 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
my bro is a kit cab vendor, so the price should be reasonable.

my toilet is relatively small, 60-70SF, so water proofing is relatively cheap. (the previous owner potong the original toilet into 2, thats why end up with 2 miniature toilet...)

need to do additional water proofing under the water tank also, otherwise water will seep through the ceiling on top of toilet..
tiensong
post Jul 23 2013, 04:39 PM

Look at all my stars!!
*******
Senior Member
2,237 posts

Joined: Jul 2011
Good luck bro!
TSSaton666
post Jul 28 2013, 05:29 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Thanks.

Upload the floor plan on Post #2

Once obtain approval next week. Will have a ground breaking ceremony next weekend despite already told the contractor such "pantang" is not a concern. He insist of doing this before the chinese "Halloween" to ensure smooth construction...
chinteck79
post Jul 28 2013, 10:40 PM

Getting Started
**
Junior Member
59 posts

Joined: Mar 2011
ur hacking price seem expensive. it doesnt need much skilled workers even though it includes removing the debris. all these hacking but didnt see they quote u new wall or plastering work?

This post has been edited by chinteck79: Jul 28 2013, 10:40 PM
TSSaton666
post Jul 28 2013, 11:27 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Location = KL

If you are talking about the Hacking ground floor wall & roof, it is actually to remove the existing 20Ft x 10Ft wall + dismantle existing pitch roof to give way to balcony.

All in all, i pay RM 18,500 for:

1) 5Ft front extension - living hall
2) 12Ft Covered car porch cum Balcony

I reckon that for front extension or back extension market rate hardly below RM 20K, i am ok with the price i get. There is other factor that i taking into consideration apart from cost.

The price quoted inclusive of construction of new wall & plastering it. Otherwise i will hack the contractor head for hidden cost.

**Edit: Front Ext + Balcony was actually RM 18,500 instead of RM 22,800. Same goes to the below post...

This post has been edited by Saton666: Jul 29 2013, 09:27 AM
TSSaton666
post Jul 28 2013, 11:30 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
In addition, the original plan was to extend 7ft but end up with 5Ft due to regulation from local authority. (outer gate to main wall must be 20Ft & above...)

So the RM 22,800 was meant for 7Ft ext, but now the actual ext going to be 5Ft only. Perhaps will get the contractor to do me a bit of favour in providing some free service here & there.
wee1030
post Aug 6 2013, 12:29 AM

Casual
***
Junior Member
369 posts

Joined: Sep 2008
From: Where 300 Spartans dine
Hi saton,
The toilet tiles quoted rm1000 for all 3 toilets. Do you mean the tiling work or includes tiles???
skng03
post Aug 6 2013, 01:08 AM

Regular
******
Senior Member
1,450 posts

Joined: Oct 2008


105k...good luck bro, no built in cabinet, no lights yet.

to move in, u need to spend some $$ for elec appliances + loose furniture + soft furnishing ie curtain nod.gif
PitzaHuat
post Aug 6 2013, 08:19 AM

Getting Started
**
Junior Member
69 posts

Joined: May 2011
QUOTE(Saton666 @ Jul 23 2013, 01:02 AM)
Get the key early June, or was it late May. Does not matter much now. Lay back a bit, now almost end of July and the drawing still not yet approved by the local authority. Adui...

Long story short, once the drawing been approved, hopefully before raya. Otherwise another month of delay can be expected rclxub.gif

Since there were no renovation started yet, so only share some costing incurred to date.
House dimension: 20 x 75 (Double storey)
Damaged so far:

Legal Fee + Stamp duty = RM 29,500 (Property SPA + Loan SPA)

Drawing for local authority = RM 2,300

Valuer fee = RM 800

Waste bin = RM 560

TNB = RM 313 (Open new account)

Cukai pintu 0.5 tahun = RM 255

Syabas = RM 100 (Open new account, forgot exact amount Orz)

Title search = RM 50

Photostat = RM 10

Damage so far = RM 33,888 (so huat, so gud)
Damage (to be):

Front extension 7F + Balcony + 1st floor concrete slab roofing

Construct carporch 12F = RM 14,000

Construct 1st floor concrete slab roofing = RM 8,800 (need to recheck, if this is the balcony, amkan!)

Hack Ground Floor wall & roof = RM 4,500

Construct Main gate wall 16F + 3F + 1F = RM 3,300

Casement window 2 sets = RM 1,664

Door = RM 600

Dismantle 1st floor 4x4 window + install new window = RM 500 (only labour)

Subtotal = RM 34,540
MISC (Lazy to categorize)

Install new roofing on top of kitchen area = RM 2,800

1st Floor plaster ceiling = RM 2,100 (800SF++ if not mistaken)

Install & Supply metal door frame x 4 = RM 1,800

Install & Supply 6x4 sliding window x 2 = RM 1,664

Kitchen wall & table top tile hack = RM 1,600

Dismantle wooden door frame x 4 = RM 1,050

Hack wall @ master bedroom 15F x 9F = RM 1,000

Hack wall near staircase 10F x 9F = RM 800

Dismantle existing roofing on top kitchen = RM 600

Toilet plaster ceiling = RM 560 (Total less than 180SF)

Toilet tile hack = RM 450

Dismantle existing window 6x4 2 sets = RM 300

Subtotal = RM 14,724

Flooring = RM 10,000 (1,600-1,700SF)
No quote yet (Budget)

Solar water heater + pump + shower set x 2 = RM 6,400 (Ouch)

Piping re-route + hotwater piping for 2 shower = RM 5,000 (waiting for plumber official quote)

Aluminium door x 7 sets = RM 4,200 (highly under estimate whistling.gif )

16F mild steel folding main gate + motor = RM 4,000

Security door package 1 + 1.5 panel = RM 4,000

Kitchen cabinet = Rm 3,000

Grills whole house = RM 3,000

WC + basin x 3 sets = RM 3,000 (material only)

Toilet water proof x 2 + Tile/WC installation x 3 = RM 3,000 (RM 600 for each toilet water proof was quoted)

Anai anai = RM 2,000

Car porch tile laying = RM 2,000

Electrical wiring = RM 2,000

Ground floor casement window = RM 1,500

Tile for 3 toilet = RM 1,000 (1 x 2 mostly, less than 180SF in total)

Car porch tile hacking = RM 1,000 (400SF)

Car porch punya tile = RM 800

Subtotal = RM 42,900
Grand total = RM 105,164

Over budget liao rclxub.gif Need to part time at jalan alor...

Still lacking:

- TV cabinet
- Wardrobe
- Lightning
- Switch

no eye see...
*
Bro, how come your wet work contractor cant quote you tilling and hacking together? Call me for porch tiling and toilet.

avereng
post Aug 6 2013, 08:35 AM

Getting Started
**
Junior Member
232 posts

Joined: Dec 2010
Boss, your reno plan is not lazy type. It is pretty comprehensive.
Mine is much more lazy and budget.
No tiles for car pouch (tiles only for cantik)
No tiles for toilet (sudah ada, why damage?)
No plaster ceiling (ceiling just to hide beam)
Keep ori main gate (sudah ada)

TSSaton666
post Aug 7 2013, 05:19 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
QUOTE(wee1030 @ Aug 6 2013, 12:29 AM)
Hi saton,
The toilet tiles quoted rm1000 for all 3 toilets. Do you mean the tiling work or includes tiles???
*
RM 1000 for 3 toilet is the tiles only. I will buy the tile to choose the design that i like. Since the total area for these 3 toilets are 190SF, and each 1 x 2 tiles around RM 5/pcs. I roughly estimate the tiles cost will be RM 1,000, but VERY LIKELY it could shot up to RM 2,000. I forgot to include the wall rclxub.gif

QUOTE(skng03 @ Aug 6 2013, 01:08 AM)
105k...good luck bro, no built in cabinet, no lights yet.

to move in, u need to spend some $$ for elec appliances + loose furniture + soft furnishing ie curtain nod.gif
*
Am aware of this. Not too worry about lights, but wardrobe can be easily another few thousands there. It will exceed 120k anytime soon, will pray hard that it will not touch the magic number, otherwise every meal need to jiak roti...


QUOTE(PitzaHuat @ Aug 6 2013, 08:19 AM)
Bro, how come your wet work contractor cant quote you tilling and hacking together? Call me for porch tiling and toilet.
*
I asked the contractor to quote itemised price to have clear picture of the nature of works. If one lum sum, later the expectation & outcome is difference then there will be a lot of argument.

QUOTE(avereng @ Aug 6 2013, 08:35 AM)
Boss, your reno plan is not lazy type. It is pretty comprehensive.
Mine is much more lazy and budget.
No tiles for car pouch (tiles only for cantik)
No tiles for toilet (sudah ada, why damage?)
No plaster ceiling (ceiling just to hide beam)
Keep ori main gate (sudah ada)
*
1) Car porch tile. (this i agree, only cosmetic)
2) I bought a 12 y.o subsale unit and the toilet really run down. Since the WC & Basin got to replace, and more important the toilet is leaking, the tile need to be replaced. No other choice...
3) Plaster ceiling (agree partially; in my case ground floor has plaster ceiling, might as well install it on upper level)
4) Main gate. The ori main gate already koyak, need to use steel chain to lock it sweat.gif in addition, the gate going to be 16F wide, normal manual swing gate am afraid that after a while either panel will sunk due to the weight and difficult to close the gate.
TSSaton666
post Sep 14 2013, 06:18 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
So long no update, Lazyman style biggrin.gif

Not many photo, Lazyman style.

Week 1 - Mainly hacking work, internal & external

Attached Image

27 August - Day 1


Week 2 - Hacking work complete, 2 toilet tile hacking & Kitchen tile hacking complete

Attached Image

The column at ground floor is up, steel work for balcony is ready. Just waiting for sunny day to lay concrete. Problem is it's raining 5 days a week. Delay.

Attached Image

Attached Image


Week 2 is happening. The ground floor WC got blockage, RM 800 burnt. Further RM 450 damage to construct a water gutter for neighbour. RM850 for concealing the PVC piping.

Best part is, the neighbour's brick wall has protruded by 4" into my house. So there will be visible protrusion @ living hall unless hack down the entire brick wall fencing, which is not really an option.


Week 3 - Concrete slab for balcony (6 inches) finally completed. Judging on the current progress, major wet work should be completed in September. Another concrete slab on top should be competed by end September depending on weather.

Attached Image


TSSaton666
post Sep 19 2013, 01:33 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Week 4 - Day 24th

Start constructing brickwall + column for upper floor. By right need to check whether the brick wall is Senget, but after considering the effort required to climb up stair, lets do it another day biggrin.gif

Only 10 working days left for September, judging from the progress so far most likely the RC roof for upper floor will not be ready.


Attached Image
Vinci777
post Sep 19 2013, 01:44 AM

No Title
******
Senior Member
1,616 posts

Joined: Mar 2006
Bro where is your house? How much for the plan approval?
TSSaton666
post Sep 19 2013, 01:49 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
QUOTE(Saton666 @ Jul 23 2013, 01:02 AM)

Drawing for local authority = RM 2,300

*
This. ( All in from drawing to approval)

KL area.
Vinci777
post Sep 19 2013, 10:09 AM

No Title
******
Senior Member
1,616 posts

Joined: Mar 2006
Didn't notice that. Thank you. Can't wait to c yrs complete. Probably we're having the same type of reno. biggrin.gif
Yamma
post Sep 19 2013, 10:38 AM

Enthusiast
*****
Senior Member
736 posts

Joined: Jun 2012
QUOTE(Saton666 @ Sep 19 2013, 01:49 AM)
This. ( All in from drawing to approval)

KL area.
*
is't include deposit for waste bin? why so cheap..

for bathroom n kitchen appliance, any thought to get those equipments (thousands again, didn't see in your budget list or i might miss it) from Singapore? based on what i read, much more cheaper than in msia.
TSSaton666
post Sep 19 2013, 11:35 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
QUOTE(Yamma @ Sep 19 2013, 10:38 AM)
is't include deposit for waste bin? why so cheap..

for bathroom n kitchen appliance, any thought to get those equipments (thousands again, didn't see in your budget list or i might miss it) from Singapore? based on what i read, much more cheaper than in msia.
*
RM 2,300 is only for drawing floor plan for the renovation + submission to local authority for approval.

Anyway the waste bin deposit can collect back after the renovation completed.

not interested in getting anything from Singapore.
kenny mansion
post Sep 21 2013, 08:23 AM

New Member
*
Junior Member
18 posts

Joined: Feb 2013
If you looking for light supplier then please contact me.. any down light we also got supplier in klang valley area.
TSSaton666
post Sep 30 2013, 12:00 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Week 5 - Day 34th

Upper floor Rc roof completed. extension done. most structural done.

pending 1) rendering. 2) door + casement window

budget overshoot a lot due to areas that been overlook from the beginning. no eye see


Attached Image
TSSaton666
post Oct 6 2013, 11:16 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Week 5 - Day 40th (or was it 41st)

Attached Image

Attached Image

Attached Image


Cement rendering done, window frame installed. Next week will put on the "make up" after casement window arrive.

Most wetwork should be completed by end October including toilet tiling.

The sliding window looks disproportionate, or was it the viewing angle. Cincau2.
















cheeshion
post Oct 6 2013, 11:35 PM

Casual
***
Junior Member
392 posts

Joined: Sep 2004
From: Klang


QUOTE(Saton666 @ Sep 30 2013, 12:00 AM)
Week 5 - Day 34th

Upper floor Rc roof completed. extension done. most structural done.

pending 1) rendering. 2) door + casement window

budget overshoot a lot due to areas that been overlook from the beginning. no eye see
Attached Image
*
Just wondering, which parts of your budget overlooked? Need to prepare myself too...
TSSaton666
post Oct 7 2013, 12:08 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
1. Piping work. Initially only prepare to spend 3k on it, but the bill easily close to 8k-9k now. mainly due to

- Construct a new water gutter that previously sharing with the neighbour = 450
- Repair a stuck WC = 850
- Repair leaking pipe at dining area = 450
- Replacing all cold water piping for 2 WC & 2 Basin + 6 new stopcock = approx 1200 (old piping leak is common these day)
- Conceal water pipe from meter to water tank = 850 (for cosmetic reason...)
- Conceal & relocate piping work at wet kitchen= 600 (for cosmetic...)
- Relocate water meter to give way for 16Ft folding gate = 600

2. Wiring work. Initially only budget 2-3k for new power point + light point. might end up spending additional few k on

- relocating TNB meter + conceal wiring due to front extension = 1500 (not aware it is so costly)
- relocating MCB box = 700 (contemplating to spend on this. otherwise the box will sit on top of TV Cabinet...)

3. Removing existing tile on kitchen table top and install new tile. (big mistake. it cost a bomb. might as well hack & construct new table top @ RM 160 per feet long.

- it should cost around 4-5k in total inclusive of new tile. will only know when the final bill comes. (i got 20ft+ of table top in total)


There are also other items that i conveniently omit since the price tag was enormous sweat.gif


A word of advise, give it a pinch of salt when someone quote you something 20-30% cheaper on renovation works. i think within klang valley there is a market price for anything from A-Z. might end up penny wise dollar fool if engage a CONtractor due to very cheap pricing. if the guy is relative or close friend then different story.


Glcotan
post Oct 7 2013, 02:37 PM


*******
Senior Member
3,333 posts

Joined: Mar 2011
the whole house look different from neighbour

do you need neighbour consent before start?
cheeshion
post Oct 10 2013, 02:08 AM

Casual
***
Junior Member
392 posts

Joined: Sep 2004
From: Klang


QUOTE(Saton666 @ Oct 7 2013, 12:08 AM)
1. Piping work. Initially only prepare to spend 3k on it, but the bill easily close to 8k-9k now. mainly due to

- Construct a new water gutter that previously sharing with the neighbour = 450
- Repair a stuck WC = 850
- Repair leaking pipe at dining area = 450
- Replacing all cold water piping for 2 WC & 2 Basin + 6 new stopcock = approx 1200 (old piping leak is common these day)
- Conceal water pipe from meter to water tank = 850 (for cosmetic reason...)
- Conceal & relocate piping work at wet kitchen= 600 (for cosmetic...)
- Relocate water meter to give way for 16Ft folding gate = 600

2. Wiring work. Initially only budget 2-3k for new power point + light point. might end up spending additional few k on

- relocating TNB meter + conceal wiring due to front extension = 1500 (not aware it is so costly)
- relocating MCB box = 700 (contemplating to spend on this. otherwise the box will sit on top of TV Cabinet...)

3. Removing existing tile on kitchen table top and install new tile. (big mistake. it cost a bomb. might as well hack & construct new table top @ RM 160 per feet long.

- it should cost around 4-5k in total inclusive of new tile. will only know when the final bill comes. (i got 20ft+ of table top in total)
There are also other items that i conveniently omit since the price tag was enormous sweat.gif
A word of advise, give it a pinch of salt when someone quote you something 20-30% cheaper on renovation works. i think within klang valley there is a market price for anything from A-Z. might end up penny wise dollar fool if engage a CONtractor due to very cheap pricing. if the guy is relative or close friend then different story.
*
For plumbing, are you going with poly pipe or PVC? Just make sure no GI for the whole system, and ask for stainless steel for all the elbows. More solid and rust free...
On DB box, you may ask for metal box instead of plastic one. Better look and solid, but cost slightly more...
Just build a new table top, you can have your desired design and size with that much of money.

QUOTE(Glcotan @ Oct 7 2013, 02:37 PM)
the whole house look different from neighbour

do you need neighbour consent before start?
*
Need to get consent from immediate left and right neighbors, it is required in permit application.
TSSaton666
post Oct 20 2013, 05:27 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Week 6 - Day xx


Week 7 - Day 54th

Attached Image

Attached Image

Most electrical & piping work at final stage. Tiling work start this week, target completion by end Oct.

Hope they can finish the wet work soon so that i can start painting external.

Take almost 2.5 hr to apply Nippon 5170 for an area of 140SF, consuming approx 2.5L. Anyway wrong application since it is meant for non-covered area. Acrylic based is difficult & messy to handle.

After it dries, it only takes 1hr to paint the same area (140sf) using ICI Maxilite Plus, consuming only 500ml-600ml. At a price of RM 65/18Litre, it makes perfect sense why most contractor quoted their paint job using Maxilite. Cheap & user friendly.

Contemplating to paint it with Nippon Weatherbond Solar Reflect, decide to reserve the 5L for upper floor. The price tag of RM 138/5 litre is a bit stiff on budget.






This post has been edited by Saton666: Oct 20 2013, 05:41 PM
Xccess
post Oct 20 2013, 08:58 PM

Twinkle lil Stars
*******
Senior Member
2,768 posts

Joined: Feb 2012


Wow...can start to see the transformation. Look forward to completion. Great job!
Yamma
post Nov 26 2013, 04:57 PM

Enthusiast
*****
Senior Member
736 posts

Joined: Jun 2012
please update. eager to see the completed version smile.gif
phoenix69
post Nov 27 2013, 08:58 AM

Regular
******
Senior Member
1,836 posts

Joined: Sep 2007


Nice one. Show the insides lah.
TSSaton666
post Dec 14 2013, 12:15 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Lazyman style is like that... biggrin.gif

Will post some photo once everything settle down. Now interior is still a war zone.
TSSaton666
post Dec 14 2013, 12:26 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
Another Half cut DIY project for 2" x 8" brick wall:

Attached Image

Attached Image

- Material = KG brand Premix plaster powder (Simen Putih) + Sika tile adhesive (Susu gum kuning tong)
- 20KG Premix Plaster = RM 15, Sika tile adhesive 20L = RM 65.
- 2" x 8" BRICK tiles = RM 104/Box. (Each box contain 96 pcs)
- On average 1kg Premix plaster can apply 15-18 pcs of brick, depending on the coating weight per brick

Steps:

0. The wall must be rendered with rough surface cement first. The rougher the better.

1. Mix the plaster with Sika adhesive, start with small volume of adhesive first, add adhesive and stir it until it gave a texture of porridge (not teow chew porridge ya).

2. Start from the floor level first. Ensure the floor is flat using Level ruler.

3. Punch two nail on each end of the wall and tie a string there as guide line for the first row of brick.

4. Apply 4-5mm of the mixture on rough surface of the brick.

5. Install brick tile on the wall, press it on the wall kuat2.

6. 10mm gap between each brick, use your index finger as reference.

7. After the installation is completed. Apply the mixture to feel all the gap, use finger to remove excessive filler to deliver a more distinctive 3D looks. Preferably the thickness of filler is less than 3mm.

Total damage so far RM 400 Indon wages for installation on 42SF wall )+ RM 416 (brick tile) + RM 90 (adhesive) = RM 906

Still work in progress though.





hongzheng
post Dec 14 2013, 01:05 AM

New Member
*
Junior Member
47 posts

Joined: Oct 2007
one question, will the tile fall off ar?
TSSaton666
post Dec 14 2013, 06:17 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
lets say you bang your head on this wall, your head will pecah first before the tile start falling off.
cheeshion
post Dec 29 2013, 07:45 PM

Casual
***
Junior Member
392 posts

Joined: Sep 2004
From: Klang


QUOTE(Saton666 @ Dec 14 2013, 12:26 AM)
Another Half cut DIY project for 2" x 8" brick wall:

Attached Image

Attached Image

- Material = KG brand Premix plaster powder (Simen Putih) + Sika tile adhesive (Susu gum kuning tong)
- 20KG Premix Plaster = RM 15, Sika tile adhesive 20L = RM 65.
- 2" x 8" BRICK tiles = RM 104/Box. (Each box contain 96 pcs)
- On average 1kg Premix plaster can apply 15-18 pcs of brick, depending on the coating weight per brick

Steps:

0. The wall must be rendered with rough surface cement first. The rougher the better.

1. Mix the plaster with Sika adhesive, start with small volume of adhesive first, add adhesive and stir it until it gave a texture of porridge (not teow chew porridge ya).

2. Start from the floor level first. Ensure the floor is flat using Level ruler.

3. Punch two nail on each end of the wall and tie a string there as guide line for the first row of brick.

4. Apply 4-5mm of the mixture on rough surface of the brick.

5. Install brick tile on the wall, press it on the wall kuat2.

6. 10mm gap between each brick, use your index finger as reference.

7. After the installation is completed. Apply the mixture to feel all the gap, use finger to remove excessive filler to deliver a more distinctive 3D looks. Preferably the thickness of filler is less than 3mm.

Total damage so far RM 400 Indon wages for installation on 42SF wall )+ RM 416 (brick tile) + RM 90 (adhesive) = RM 906

Still work in progress though.
*
Nice one you got here.
Any update???
ExtraOrdinary
post Dec 29 2013, 11:47 PM

New Member
*
Junior Member
13 posts

Joined: Aug 2007
QUOTE(Saton666 @ Sep 19 2013, 01:49 AM)
This. ( All in from drawing to approval)

KL area.
*
Hi,

Just wondering, can pm the contact for dwg and approval. Any DBKL inspect your renovation work? I'm intent to skip the approval for Reno. My Reno are similar your, extend 1st floor slab at car pouch area, What say u?

Cheers,


monkey9926
post Dec 30 2013, 12:52 PM

Getting Started
**
Junior Member
292 posts

Joined: Sep 2013
QUOTE(Saton666 @ Jul 23 2013, 01:03 AM)
Floor plan for the renovation.

Should be getting the approval from local authority on Monday.

[attachmentid=3557769]

[attachmentid=3557770]

[attachmentid=3557771]
Saving

1) Solar water heater + pump + shower set x 2 = Save RM880 (Budget RM 6,400 vs Actual RM 5,520)

2) Piping work + hotwater piping for 2 shower = Save RM 2,500 (Budget RM 5,000 vs Actual RM 2,500)
*** Include WC & Basin Cabinet installation.

3) WC x 2 + basin cabinet x 3 + Tap x 3  = Save RM 295 (Budget RM 3,000 vs Actual RM 2,705)
Over spend
*
drawings so old schooled. still using hand.

TSSaton666
post Dec 30 2013, 09:37 PM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
QUOTE(ExtraOrdinary @ Dec 29 2013, 11:47 PM)
Hi,

Just wondering, can pm the contact for dwg and approval. Any DBKL inspect your renovation work? I'm intent to skip the approval for Reno. My Reno are similar your, extend 1st floor slab at car pouch area, What say u?

Cheers,
*
Don skip. Later bandaraya hari2 cari you lim kopi


Selling tiles https://forum.lowyat.net/index.php?showtopic=3083485

cry.gif cry.gif cry.gif cry.gif cry.gif

Tile photo as per picture. **Miniature toilet using warm white.

Attached Image

shiinkuro31
post Dec 31 2013, 04:25 PM

Chef of Straw Hat Pirates
******
Senior Member
1,259 posts

Joined: Feb 2005
From: North Blue



Hey,

Mind sharing with me your alumn door frame installer?

This post has been edited by shiinkuro31: Dec 31 2013, 04:25 PM
haikalraihan
post Dec 31 2013, 04:59 PM

Getting Started
**
Junior Member
106 posts

Joined: Nov 2013
QUOTE(Saton666 @ Sep 19 2013, 01:49 AM)
This. ( All in from drawing to approval)

KL area.
*
RM2300 include structure plan or just architectural plan?
[MY]Joker
post Dec 31 2013, 08:37 PM

Getting Started
**
Junior Member
288 posts

Joined: Jan 2003
waiting for more update of picture
monkey9926
post Dec 31 2013, 11:07 PM

Getting Started
**
Junior Member
292 posts

Joined: Sep 2013
saton kor,

have u stock up on electrical items like ceiling fans, lights and air cond to avoid buying when harga naik later?

TSSaton666
post Jan 1 2014, 10:00 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
its metal door frame, and will rust in time...

RM 2300 hamprang, all in, 全包, அனைத்து சேர்க்கப்பட்டுள்ளது, सभी शामिल

no money. if increase, let it be.
monkey9926
post Jan 1 2014, 10:09 AM

Getting Started
**
Junior Member
292 posts

Joined: Sep 2013
Recently I looking up for ceiling fan models n I found out lelong n laxada got sell. Anyone tried buying online?
TSSaton666
post Jan 1 2014, 10:18 AM

Getting Started
**
Junior Member
117 posts

Joined: Jan 2012
why buy online when you can get 5 blade ceiling fan with remote @ rm 139, 3 years warranty somemore. go check out cima lighting.

 

Change to:
| Lo-Fi Version
0.4411sec    0.85    6 queries    GZIP Disabled
Time is now: 26th November 2025 - 08:13 PM