visit, don bring ur wallet aa...
hahah...not power enough to do demo la bro....

aisey.... share share knowledge, take me as ur disciple

anyone know how to mix to make a nice silver colour by anchor spray

found this, just for share, water effect with paper, paint & clear coat:



https://www.facebook.com/media/set/?set=a.5...67936835&type=3

Anyone knows any solution that can dissolve Mr. Coat matte paint? Tried Zippo but it didn't work, I guess I need stronger solution, but I don't want to use unknown industrial thinner if possible.

Strong Oven Cleaner should get rid off it i guess....if can't, DOT3 Brake fluid

for acrylics, you can use window cleaner thinned with water (windex), isopropyl alcohol, IPA thinned with water (50-50)
used industrial thinners for cleaning your AB and other stuff.

Hi. Does anyone know how to make custom waterslide decals? Does it need a special printer/paper?

there's a few seller in LYN, sells decal papers...
they claim that can use normal inkjet...after print, spray on clearcoat before use..
i never tried any..
so if anyone here have tried, and can make a step by step instruction or vidz tutorial would be great

Yea that would be great. I've been wanting to make custom decals but I'm not sure how to get the materials.

For black or dark parts that hav a lot detail lining.. do you panel line them with white so that it will be visualable?

Or there is other method?

sometimes i will try silver
but it had some metallic powder around the plastic left there even wiped with thinner
mayb sanding not enough, there is still some gap that allow the powder to go into it

Hi bros, want to ask, Does Nippon Nylox have a primer? i see in their website they have a anti-rust primer but they suggest it for metal. Can we use that for gunpla too? Thanks guys

Sifu, newbie need help. Why does the part break itself after spraying with Mr Color?

I would not recommend it since those quite strong paint which can melt the plastic but you can try on unused runner to test.

Do you spray too close or apply it too thick ?

This post has been edited by Khai62: Jun 26 2014, 01:32 PM

I assume the part is ABS plastic,
ABS plastic quite weak to any lacquer based paint so paint with risk

you can try acrylic or enamel based paint, its more safer

This post has been edited by nazrul90: Jun 26 2014, 02:36 PM

hi all sifus,is the step below correct if iwant to get sinanju metalic red kind of finishing?

mr.hobby primer 1000->tamiya silver->Tamiya clear red->clear top coat

also how to get the metalic kind of feel like below pic?



Attached thumbnail(s)

Guy where can I get depron foam at pj

clear red tak cantik.
better guna Mr. Color GX202 Metal Red


the more clear red u coat, the more darker, if coat little it look like orange red. mean, one part color dark, one part color light..tak balance.

when color after top a clear gloss, it becum dark also.

Ok. my suggestion only. ya

This post has been edited by limfreelance: Jun 26 2014, 04:01 PM

meaning primer straight skip to metalic red then clear top coat bro?

I am doing ab for volks FSS dark knight and want to get the same effect as attach pic actually.