LOL.

Congrat V4.

u mean candy color??? But the based color u need to coat a silver coating 1st.

based coat + Silver + Clear red (noted, the more layer of clear red u spray, the more darker the color).

fuu..i saw ebay sell for rm20, anyone try it bfore??

hi

any one have try this??
Kosutte Gin San powder.



the effect is really awesome....but my questions is?

1) after done the work, if play the or figure touch the powder, does it defect?
2) if top a clear coat, does it affect the chrome?

thx

thx for the tips.
have a nice weekend.

Just share abit paint problem.
last nite im using tamiya enemal paint to paint my PVC hair (due to out of choice).
after dry the paint bcome sticky & melt, i using Mr hobby flat clear to topcoat, but the result is abit improve & the problem still there.
Normally i only using Mr hobby & gaia color on PVC, & have no problem, seen like i need to re color it with mr Hobby.

form more detail u can read here


http://babahobbywork.blogspot.com/2013_06_01_archive.html

This post has been edited by limfreelance: Feb 11 2014, 04:55 PM

welcome.

but not encourage u to apply in tamiya 4wd, bcos the paint easi to scar.

surface/based coat> Black /gloss black > Silver (lacque based) > clear or florescent color toner. (if u apply a layer of clear Gloss finish for protection, the color becom dark abit).

This post has been edited by limfreelance: Feb 11 2014, 05:03 PM

1) u no shake well,
2) i believe your spray can remain 20% paint.
chrome silver is like that when the can start to run out of thinner (inside).

certain hobby shop has offer or sell off their old 1/60 gundam Display figure, since 1/60 is PG, so the price is expensive that can up too thousand above.

i share My faster way, & accuracy for masking Camouflage (digital) that color tones more than 2 above.
I get A4 blank white sticker, Just print it & cut the shape out. Or u can print a Graph on the sticker paper & decide the digital masking pattern by using hand pencil.
It way too Fast to save your time by using traditional Masking Tape. The adhesive not stong that will peeling your paint.
Later i will use it for my next project, 1/35 ZTZ digital camouflage.
Recommend for Accuracy (Camouflage) Masking based on the 2d view.



It accuracy bcos it allow u to use computer trace & print it out.

This post has been edited by limfreelance: Apr 7 2014, 06:04 PM

normaly for metal effect paint, used lacquer Flat black + Silver. It more stronger.

common issue for ab.
1) dust
2) shake no thoroughly.
3) your paint dry at the mount of AB if u let it for 1-3min.

to avoid, use cotton butt to clear the ab mount everytime u wanna spray it, then press the spray to spray in test area to let the dot out (do not release the ab button)..... from spray area move it to your car. Do not release the ab button until u finish spray the layer.

let it dry, spray the second layer using the same method.
this method quit annoying, if gundam got dot paint, simply use finger to rub it & respray it.

sharing, later gonna paint my optimus prime.



i think i get the alclad chrome + mr metal red Gx 202 & metal blue GX 204 is best for prime scheme.
for more.

http://www.pla-zone.com/thread/811

try alclad II. it improved version.
btw, i take this photo as reference from here: http://www.pla-zone.com/thread/811

hmm. sometime the photo is way better than actualy product.

i encounted problem of using enamel, & from that day on i only use laquer based.
for color selection, i use laquer to mix it out.

metal color easi to chipped off, suggest use a super Clear gloss II as topcoat.

for polished aluminium cannot coat. but after a week the powder also will blow away.

for chrome, if u coat the color become darker, but if u dont coat, the color also defect or sticky when touch.

found this, just for share, water effect with paper, paint & clear coat:



https://www.facebook.com/media/set/?set=a.5...67936835&type=3