4.5GHz @ 1.26v (bios set 1.25v), 1066 @ 10-11-10-27, 1T

Just tested. The latest LinX 0.6.5 (11.1) is still yielding 120+ GFlops for Ivy. (Pls ignore lowest one most probably got affected by background apps)

4.6GHz @ 1.328v (bios set 1.31v), 1066 @ 10-11-10-27, 1T



This post has been edited by gsan: Sep 30 2013, 11:27 PM

actually which stress tool is used for benchmark stability?
LinX run hotter than Prime95
Prime95 required higher vcore than LinX

Both.
Newer and latest version is more stressful.
Your 32-bit is not really stressing all the memory installed (just 20% out of 16GB stressed).
You really need a 64-bit Windows bro.

my i5 4670k 4.4GHZ @ 1.25v getting 94c on IBT Maximum test.. cooled by EK Supremacy WB + D5 pump + Phobya 200mm rad + TFC Xchange 120mm rad..

Is the temp normal? Just wonder

Normal.

btw ure flow config and rad to fan setup matters.

OK my loop as below
Bayres + D5 >>> 120mm rad >> Ek CPU wb >> 200mm rad >> bayres D5

However, there is an awkward setup on my CPU wb, as I reversed the inlet outlet port for better overall looking. Does it matter much in cooling efficiency?

Thanks

will retest again once my rig up with 64bit OS

that 120mm rad is a killer for flow. I assuming ure using the jet plate for ek block. The higher the flow the better the performance. D5 heat dump is minimal..


then again we are just talking here max 2 c difference.

Bro, pls check out my review on Hero HERE

Although the Hero User guide manual recommends red slots for mem OC. I find it the other way around. Black slots performs better. Reds are capped at 2800 only, black can go as high as 2933. Reds failed to detect my Samsung rams giving debug code 55 = GG

when you said failed to detect the ram on red slot, it mean when it overclocked or even at stock cant be detected?
I have faced code 55 before, no matter on a1/b1 or both a1/a2, that's because one of the pin on the socket was bent. but once fixed it back, can boot up as usual

need higher vcore to prime stable at 64bit OS




Attached thumbnail(s)

On stock clock. Yeah bent socket pin will affect mem OC.

Finally, 64-bit
Yeah it needs higher vCore because you are now stressing more amount of RAM and the loading the IMC to the max.

This post has been edited by owikh84: Sep 30 2013, 09:37 PM

my corsair doing 2133 and cant go more no matter how I tweak bios/ram timing or pump more vdimm...
will try on black slot later and see if can still push up or not

Your Corsair is what version? Once you know what IC it uses it is easier for you to OC.

cant remember, will check again when I try switch the ram to black slot

Alright, pls update us how's your findings on red vs black slots. All the best bro

sorry for off topic:

@gsan,

glad to see u around again bro, it's been a while...