What I wanted was the vcore to throttle down too. Like your example where your proc was running at 0.00v or 0.15v!

However, I would be happy if I can get it to go down to 0.700v @ 800mhz.

eist and c-state enable it.

Is it enabled! Will check my bios to see whether any other settings....

After more searching, it seems that I can't have the best of both worlds?



From the graph, it looks like override mode can't adjust voltages......

Source : http://www.overclockers.com/3step-guide-to...k-intel-haswell

This post has been edited by kmarc: Jun 20 2013, 01:19 PM

Dude on asus m6e vcore can be set at manual n the rest not.
Gaugay oc also no issue.

This post has been edited by cstkl1: Jun 20 2013, 03:36 PM

I just tried 4770k with 4.5ghz with maximus vi gene and unstable.
I know I had a bad chip. Intel can't apply their thermal paste properly.

1st core is ~90 degrees
4rd core is ~79 degrees

Orhh and I'm cooling with silver arrow (non extreme)

If you testing GB OC,use BIOS B10.........(good for PSC)

Tested this already for few hours.

This is the setting for PSC kit for 2133C7. The bandwidths are high. Arnd 33k on read/write copy



Noted. Think will be doing PSC only. So far all the samsung and hynix seems to be taking a hit with the lower trdrd and twrwr

Nice......
Yes,GB has high bandwith and lower trdrd...twrwr....comparing to asus.

I don't have any PSC kit,only BBSE and Samsung IC.

Here, Dino using F5m BIOS with PSC (with some BIOS setting and results).

Edit:
Next month will order some Hynix MFR kit.

This post has been edited by stasio: Jun 20 2013, 07:16 PM

running prime 95 right now. seeing it flux from 89~100 is giving me a heartattack. Hopefully will post my full result in 2 hour 50 min

and yea!! 500 posts.

This post has been edited by JakeGFX: Jun 20 2013, 07:22 PM

Bios and cpu-z.

Weird, not too sure why but my Asrock can't!

That's nice. Mine is not even stable at 4.2Ghz 1.1v.....

Manage to get a stable 4.4ghz with silver arrow (non extreme) but a very high temperature of 100 degree max. I think I should went with the line method with the thermal paste. Here's the result. I put it in spoiler because I don't want to flood the page.

Throttling spotted. Unstable. U really need to take a step back n learn how to clock on ure board.

Use the gamer preset as a start

This post has been edited by cstkl1: Jun 21 2013, 01:35 AM

Wow! Straight to extreme tweaker LN2 mode? Isn't vcore of 1.352v a bit too high?

For starters ----> ROG RealBench

x64 ONLY!

This post has been edited by khaidir1976: Jun 21 2013, 10:06 AM

Yea I'll try 1.25v and start slowly add multiplier.

Just went thru all various Z87 OC Guide (Asus & Gigabyte atm).

After many "new records" or "Total Domination!" and OC Guide for ES chips, from
various companies (persons), done all with Engineering Sample (ES) or Qualification Sample
(QS).............QE6S - Asus (need FIVR baypass) / QEH6 - Gigabyte (became QS Prime for Retail).

Is nice to see what ES version can do but........it's time for them to turn the page and start to look in RETAIL version
as we all buying Retail version which didn't perform as ES.

This post has been edited by stasio: Jun 21 2013, 04:42 PM

Sins gaygay oc guide has more real world explanation
while raja is seriously good for reading and knowledge but no starting point at all

the rest out there. garbage.

Yea, Sin (Steven) start to change OC Guide slowly with Retail version,but this will take some time.

Edit:
Here is new video with GB OC board:
Dinos22 explains GIGABYTE’s OC Touch features on new Z87X-OC board...



This post has been edited by stasio: Jun 21 2013, 05:42 PM

don quite get wat you meant here but during intel corsair event, for Top speed section, all are restricted to use provided QEH6 CPU only

This post has been edited by coolice: Jun 21 2013, 07:23 PM