what use of the 4 extra pin?
more power to cpu?

Nice OC

4Ghz Intel805 Yet?

who me???not yet...still short of couple more mhz...mobo's holding me back...gosh darn..

With power consumption over 200watts, wat kinda PSU are u using? Water cooling yet?

wah its been long since i last entered lowyat.net forum...

skunk people already want to show off intel 4ghz plak...

thiz wat i've been waiting for all thiz time...

eh guyz....can i join



mine...very² old school d, about few months old (some of u maybe familiar with thiz score!!)

it's a 2.4A presscot with stepping SL88F revision E....manage to clocked it to 4.3GHz from 2.4GHz (default) a 1.9GHz increased ....cooling with tt bigwater, wat u see is the idle temp (42'c) & if im not mistaken the load temp is around (54'c - 55'c)!!mobo is msi 865pe neo2 platinium edition, now the mobo "kong" d.... !!



some of the setup ::

psu :: aerocool turbine 550watt dual rail
ram :: Kingston hyperX 256x2
gc :: galaxy 6800NU
hdd :: wd 80gb (sata)
optical :: benq 1620pro

This post has been edited by amd_scooterist: May 13 2006, 01:32 PM

walla eh..long time dun see...4.3Ghz .. same set up like mine..mah sifuuuuuu..lol...

http://www.tomshardware.com/2006/05/10/dual_41_ghz_cores/

thanx for the link..
damn 1.6V to break 4Ghz for the 805..
obviously heatsink not gud enough man!..

This post has been edited by newbieockids: May 18 2006, 09:58 PM

One Q's.....


it is supposed to show 400,300 or 200 Mhz....





i'm confused here...am i overstressing my rams?

This post has been edited by antonio_zth: May 20 2006, 03:09 AM

yap im having this Question as well. very confuse ,

For ddr2 ram. 200mhz = 400ddr2 rating. 300mhz = 600ddr2 rating. So 266mhz = 533ddr2 rating.

so mine is DDr600 lar rite now.... owh..and it is stable lor...regarding the rams are only KVR 512 ddr2...

i heard that ddr2 533 nowadays very ocable
normally oc to 667 shd not be a big problem...

Hi all,

I want to set up a new system using Intel 805D like what antonio is doing. Read the review from Tomshardware and this processor rocks. But the problem is, what motherboard should i use? Been looking at those wicked 975s but their prices are ridiculous.

Any less pricier mobos other than 975 to recommend that can reach around 3.8 - 4ghz.

Thanks all

I think 805D is not really a performer.
975 chipset mobo is just too expensive. If you insist on 975 mobo, you should pair it with Conroe instead of 805D.

Read below link,
http://www.dfi-street.com/forum/showthread...33&page=1&pp=15

Thanks ALeUNe for the reply. I don't really insist on 975 as the price is too steep. I want something cheaper to go with 805D that can o/c it to around 3.8 to 4.0Ghz. Any suggestions?

Thanks again.

abit il8 cheap n good.

This taiko fella is runnning 4.7Ghz OoOOo...look at his siggy...

btw I'm getting myself a 975 Asus in two days time...heheheh..cant wait to crank em up...

I did a 4GHz OC with a 2.4C.....ehhehehe.

mine...testing...testing.....

http://valid.x86-secret.com/show_oc.php?id=96930

any comment...so that i can go higher....