Once Upon A Time At Antonio's Lair

Ok fellow friends, antonio is back to bring the fun and excitment in the scene. As u all know that not much Intel people dare to bring up their overclocking 'ciput' since right now all the abang AMD has tapau us all.

But no sweat...8k in Sandra mem bench doesnt mean anything if your still runing under 4G's....hahahah...ya thats rite...4G brother...well i'm also short of that amount...so lets gather and open a 4Gigahertz shall we??

AMD

-So this is first run...3.8 teruss...no kasi chance wan...



-This were a lil bit brave...bump up voltage a bit and start craking...



-This is the 1MB run of the seriously (saat-saat getir) 4 non stop Dunhills....



-Not enough stability in my book...so i ran an instance of 32MB to see what happends...Temp being beeping like hell...



well...as for CPU-z validation can be found here----> http://valid.x86-secret.com/show_oc?id=85819 or http://valid.x86-secret.com/show_oc?id=85818

:Notice:
-no 3D testing...(not a fan of 3D anyway)
-games : played Godfather EA & CM2006 12 hours...No problem...
-Temps max were 63c
-bump voltages 1.45v
-who say's putting two Presscott core in a single chip is no good??

This post has been edited by antonio_zth: Apr 13 2006, 06:19 PM

break 4Ghz bro..
eager to see them..
no chance to break mine b4 coz psu bottlenecking..

I cant...board do not allow.....

what cooling system u use?

This post has been edited by kulus: Apr 11 2006, 11:54 AM

Standard HSF running backup with Delta 120mm

What's the idle temp and full load temp for the highest clocks archieved?

This post has been edited by Hyde`fK: Apr 11 2006, 12:59 PM

now that's where your money went

any intel user can reach 4Ghz?

mine can.... but prescott la

It seems tone has a Cedar Mill doing 4.65ghz

Wow..that 805 is really high overclockable. But..i notice your ram running at 190mhz = DDR380? You underclock it too far for DDR2 . Try with tighter timing and higher clock for ram. Your superPI is very slow for a 3.9ghz . Perhaps due to ur Slow DDR2 runing at DDR380
No offence here.

This post has been edited by Cyclone87: Apr 11 2006, 05:29 PM

idle around 36-39c
max load temp would be around 63-67c...


hihihih...no lar...


erm..a few guys here...view the intel thread to know more....


no lar...maybe it is actually downclock a lot...

the problem with DDR2 and my mobo is that it cant run at 1:1 which is supposed to be DDR 133 while FSB at 133 aLSO....if i set the ram at that speed...my overclocking would be around 3.0gig only....

waitttttttt
you running it at 1:1 O.o got 1:1.3 or not?

I would like to command you to do the prime TEST NOW!!!!!!!!!!

Just to provide a better picture of system stability, just whack it for 2 hours is good enough for all of us. I hate SUPERPI because it's quite easy to pass, most of the time extensive or critical applications like installing kernel module for linux would hang provided the system is not stable when priming. It does happen to me couple of times before and I completely hosed my system.

This post has been edited by PCcrazy: Apr 12 2006, 06:52 AM

im running 1/4


Prime...later boss coz rite now still need to rectify cooling problem...thermal reach up 67 last nite and thermal protection only at 65c...arghhhhh

2.6Ghz clocked to 3.9GHz... woow... 1.3GHz more gained.

DDR2 Multipier got 4x...
so is 190*4 = DDR2 760...

u are funny....

haha...

juz kidding.....

walao wanno throw my sempron liao...how much u bought the 805?if not wrong it is quite affordable i suppose?
wats the mobo used?
damn nice, thumb up for u bro!