intending to use as stand alone isolator for satellite dish.

the rest i'm still using belkin. they have paid my claims time and time again

---

Added on May 20, 2011, 12:13 amso basically means that i need to earth the MDFC

This post has been edited by radioactive: May 20 2011, 12:13 AM

yup... u can connect the MDFC earth wire to any TNB's grounding point (such as 3pin power socket's earth point)...
u can buy a vanila 3 pin power socket, connect it into earth pin and plug on to wall will do...

ok, 1 unit +shipping please

Hi,
Wanna ask. I plan to get '2' units of Callab for my Home Theater system. As you know the HT system uses high power and so i do not want to tap the power from a single wall socket (TNB) using only 1 callab.

If I isolate the external sources using 2 units of callab; 1 callab for TV and antenna from wall socket A, and another callab from another wall socket B for the ampliflier. Both the amplifier and TV is connected through RCA cable.
Do i still get protection from lighting and surge? Is this still consider an island since i have 2 different cal lab?

I'm just giving examples here for my understanding of island concept, since i also have DVD, blueray player, mediaplayer, PS3, DVD player to connect. Just worried that my understanding is wrong and it get fried.

Thanks...

u still can use 2 different wall socket which connected with 2 unit of cal-lab for the same island

for u HT system, you can use NILIcuHIFI which customized for audio system and deliver cleaner power source to audio equipment... for ur TV and antenna (assumed no satelite dish or telephone nearby) u can use STV9511 instead... but is ur media player connected to any Lan cable/networking?

Hi yes my media player is connected to LAN. I', still trying to draw out how to wire it and how many units needed. I need to keep cost low also
So the green cable protruding from the CLLI, i just connect to grounding inside the ground pin in wall socket?

Highly recommended products and gd sales after service..thumbs up for u bro!

Hi,

I wish to protect my modem from lightning strike.
Any recommended product?

Pls PM thx!

Hi, 1 more question, for STV1511, what is the max watt loading i can use with it?

I plan to use a gang socket to connect my AV equipment to this. Can STV1511 take 1800Watts loading?

if ur media player required for lan cable, u need SLAN1236 on media player to avoid surge come from lan cable...
let me know your overall equipments setup and layout so i can draft a diagram for understanding...


STV9511 can support 1000w...
if need the higher load, u can get MDSC0039 pair with MDTV9922 or AV Pack...

about the NILI which customized for Audio System, it can support 1800w...


if only have 1 set PC and 1 modem, no telephone/ADSL splitter filter nearby, no PC to PC networking (few PCs connected same router)...
u can use SF9512DSL, SF9812DSL, SF9512DSL MS2+3 or IT Pack

hi,

i have 2 sets of PC connected to router, telephone splitter connected to 2 telephone.

so which model suitable?

thanks,,

2 PC, 2 telephone, router and ADSL Splitter Filter located side by side?

1 PC near to router, ADSL just upper the router..1 connected via long LAN cable...

is it ok just install SP9201-DAF to protect telephone line?


thanks..

means u have 2 island, u need to protect power, tel and lan cable...
both of telephone located together with PC that near to router?

sorry, don't understand what is 2 island. haha

1 telephone in leaving room and near to PC and router, 1 telephone in bed room.

thanks,.

so no tended to protect the telephone in bedroom?

err..may i connect incoming phone line from telecom to clli and split out to 2 phone line..1 connect to router and phone line?

thanks..

here ur propsed setup diagram...

thanks for the diagram..

i think i order SP9201DAF 1st, usually lightning hit the telekom phone line and my modem spoiled.

let say after installed SP9201DAF, lightning hit the telekom phone line, the SP9201DAF will protect the modem router and very low possibility will surge the CPU via LAN cable right? not talk about TNB...


what's your view or comment for Gold Series 8-Socket Surge Protector?



thanks..

u can use SP9201DAF to protect tel line only...
but Cal-Lab wont responsible for any damages on your equipments as surge have the possibility come from TNB and LAN cable as LYN forumers' experiences their equipments damaged... beside tel line, so it proven that TNB and LAN will damage ur equipment even though your tel line protected by Cal-Lab...

about belkin performance, refer to this post...
http://forum.lowyat.net/index.php?showtopi...dpost&p=6626295