either is bad grounding of your equipments or your multi socket or poor earthing provided by TNB

if your equipments with bad grounding, nothing much can do...
as good equipments usually wont leak any currents out from the casing...

hi,

what's the recommendation for phone line/fax modem?

SP9201-PA
SP9201-D
SP9201-DAF
MDSP9922

thanks

are you using fax machine or dial up modem? if yes, recommended to use SF9512ARD for power & tel protection as concerned that surge may come from power source too...

Hi, My setup like this:

4 phone lines
1 adsl modem connected to 1 phone with splitter for internet connection
1 PC with 4 fax modem, 3 modem connected to 3 phone line directly and 1 modem connected to the splitter. all for receiving fax.

kindly let me know what model is recommended and how many unit i would need for this type of setup?
and price + shipping to kl.

thanks

Setup 1
PC used with ADSL modem and telephone & splitter located beside both PC equipments, u can use the combination of MDSC0039 + SP9201DAF... SP9201DAF will used to replace ur ordinary ADSL splitter filter...

Setup 2
PC + 4 unit fax modem, you can use SF9512ARD + 3 unit SP9201ARD. about your statement "1 modem connected to the splitter", you means this tel cable come from Setup 1's tel cable?

anyway, is it ALL of the equipments as above located in the same room?

that mean i would need to have
1 x MDSC0039
1 x SP9201DAF
1 x SF9512ARD
3 x SP9201ARD

thanks

This post has been edited by wongyewloong: Jan 12 2011, 11:39 AM

here as proposed...

hi, I've modified abit on the diagram. which i only have 1 pc.


in this case, do i still need the MDSC0039 if i connect my adsl modem to the PC2 multi socket?

thanks

if 1 PC + 1 USB ADSL Modem + 4 USB Fax Modem
since all of your modem powered up via USB, no necessary for MDSC0039...
unless u means your ADSL modem wasnt the USB type, but connected via lan cable instead...


This post has been edited by gkl83: Jan 12 2011, 01:43 PM

Dude.. This Cal Lab product really giv me a headache. I dont understand at all which model i should buy. Can u recommend me for my setup:

3pin plug for PC
3pin plug for monitor
2pin plug for speaker
2pin plug for printer
direct phone line that connect to splitter and later on connect to ADSL moderm and phone.

if possible extra 2 port for my phone charger.

Preferable contact method: PM

Thx ya

This post has been edited by syncomp: Jan 15 2011, 05:55 PM

Comes to your thread for advice

I am currently running 2 desktop, 1 connected via wireless another via RJ45 LAN

Internet vice is

Phone - ADSL Spliter - Modem - Router

Everything is located together.. I am using Tons of extension together now.. around 10 plugs together.. How do you proposed a lighting protection system? Do I need to protect both my power and my phone line all together?

Please update me on your proposal

1. ur ADSL splitter filter and telephone placed near to ur PC?
2. have any PC to PC networking via same router? (more than few PC inter-connected to modem/router)


what is your equipment list and what is total power consumption? only 2 desktop + 1 modem router concerned? bcos cal-lab have 1000w & 2000w version depend on your load... hence is ur ADSL splitter filter and telephone placed near to ur PC?

3 monitors in total
Desktop 1: 560W PSU
Desktop 2: 750W PSU
Laser Printer x1
Speaker x1
Router x1 Modem x1
ADSL splitter is placed just beside my modem/telephone

All of them are connected on a same table..

so recommended to use the combination of MDSC0039 + SP9201DAF...
if u prefer the multisocket version, u can consider on SLMS2+3 or twin power pack...

1. Yes
2. U mean connected thru the internet using cable connected to the router??? Yes, Got 2 PC connected to the router(modem) using cable.

if both of PC and modem router located at the same table/area... then lan cable protection no concerned...

as overall, 2 PC, modem router & telephone located at the same table/area, then u can use the combination of MDSC0039 or SLMS2+3 or Twin Power Pack + SP9201DAF

Unifi set (4 socket needed) + 1 tv + 1 astro. all located at the hall.

do recommend

thanks

hi need ur advice...

LCD tv + antenna + astro + 2 stand fan + dvd player...

is that too much equipment on one socket?

if ur TV no connected any aerial antenna, u can use MDSC0039FC for power and astro protection


u can use SFTv9622FC for power, astro and aerial antenna protetcion...
as long as ur total power comsuption no more than 1000w then should be fine...

Hi, I wish to get your recommendation on a power strip/surge protector...

The biggest problem with my requirements is that my room only has ONE power outlet, and i use the following devices all at the same time (mostly)...

Usage:
1) ADSL Modem
2) Laptop
3) Laptop
3) Desktop (<350W)
4) Table fan
5) 4.1 PC speakers
6) Guitar amp (13W)
7) Phone charger

What I have in mind is a 8-port power strip, but I can always daisy-chain (to be advised)...

thanks in advance!

This post has been edited by ptewee: Feb 7 2011, 09:13 AM