if dont need extra features in ac86u or ac68u, ac1300hp more than enough.

spend extra cash for an AP or powerline to extend your wifi.

Today received refurbished T-Mobile RT-AC68U purchase from Taobao including shipping <RM299.

Flashed to latest Merlin RT-AC68U_384.4_2 firmware and setup successfully completed, all good and secured with AiProtection.

more details Here and Here.

draw back is no 3 years warranty la.

This post has been edited by Alex9182: Apr 24 2018, 08:54 PM


Attached thumbnail(s)

Yeah. Just bought one. Quite pricey tbh but as long as I don hav to deal with the unstable speeds currently with the rtn12hp.

Hopefully it can deliver. Especially when it comes to range and obstacles.

Looking forward to installing n using it.

Yup I don think I need extra features as long as I can utilise that 100mbps.

However, ur point on getting an AP/power line did interest me.

Nvr thought about this to boost WiFi to higher floors.

If u r using one, mind suggesting a reliable AP n wat r the typical cost for a reasonable quality setup ?

i install rj45 to Ground floor and 2nd floor. my router is at 1st floor.

using ac68u as my main router bridge to airport extreme at ground floor and airport express at 2nd floor.

u can use your TM router as AP. Two options. RJ45 is the cheapest and most reliable solution but if u dont like to lay cables around your house, can use powerline. cost depends on model. i can just say its not cheap.

This post has been edited by firdausbhari: Apr 25 2018, 01:58 AM

yes, not cheap... but is the most affordable for its performance, imo.

also, if u r paying for 100mbps, better get max juice from it!

unless yr hse has many walls and u need to cover >60ft radius, will be fine.

Hi, is it possible to connect Lyra to rt-ac68u via AiMesh? Meaning ac68u as my main router and all three Lyra as my nodes.

Definitely much better than the RT-N12HP and it is another level compared to the stock Unifi router.

Hi kinseong,

Currently Lyra are unable to be connected using AiMesh.

Thank you

I just bought AC1300UHP
i select unifi home but port 4 is use for Hyppty only.
Can i open the port 4 for other device use?

This post has been edited by okboy: Apr 27 2018, 07:52 PM

Log into your router, go to Advanced Settings, LAN, IPTV, and select the Unifi-Business profile. You can then use Port 4 for Internet as well.

Thanks it work

hi
i buy asus mobo, and try to register online for 3+1 warranty,
and web page request * Contract code from VIP Card：& Password from VIP Card：,
how i find this 2
thanks

No worries bro.

Hi Ash55,

In future you can post your question on desktop component at the below link.

http://forum.lowyat.net/topic/1813844

And for the registration, please refer to the image below to do the product registration. The contract code are for the purchasing of extra warranty period for other products.

After you have some the registration, visit the link below for the 3+1 years warranty registration.

https://www.asus.com/my/events/info/activit...rantyextention/

Thank you


Attached thumbnail(s)

thanks

Hi,

I'm using RT-N12HP_B1 router for my 50mbps unifi. I don't have issue with LAN connection but on wireless my speed drop drastically to below 5mbps. The distant is 2-3 meter from the router. Is there setting do I need to do to improve my speed? I already update the firmware to 3.0.0.4.380_8228.

Simple. I am assuming that you are connecting on the 2.4GHz band. It is probably saturated and full of interference
It’s either you use a WiFi analyzer in your phone or PC to analyze the wireless networks in your area and change to a less congested channel or get a better dual band router that can support 5GHz AC. I recomend the Asus RT-AC1300UHP.

Not in a budget to change a wireless router now. So temporary solution is that I need to change the channel to the less congested is it?

Yes. Use a wireless analyzer on your phone or PC and check which is the least congested channel.