cause you asked...

do it either way you like... just make sure you don't face plant on the ground while trying to do a free willie... road rash on little brother might be darn awful and seriously hard to explain to friends without them laughing their balls off and feeling sorry for you at the same time...

keyboard warrior... i only know guitar hero... new game?

right click -> copy image location -> click IMG button in advanced post and paste..

no rocket science there...as simple as milking a cow...


the human mind is of deep unexplored depth...

WAT!!! it's wrong for a man to explain his answers in detail now???

the question should not been asked in the first place if no one can handle the answer...


you need a upper cup to replace your the big conical shaped spacer as that was designed to be like that.. most likely FSA made a similar model with a lower stack height...

they can take out the for and measure the steerer to find the correct headset size...but looking from the merida site.. FSA BB410 headset seems to point to a 1 1/8" semi integrated headset... that should be enough for them to get your one...

yeap..you are right...zero stack is the way to go if you want that slammed look...

i think ritchey and cane creek has a lot of ZS headsets....

This post has been edited by butthead: Dec 1 2012, 11:40 PM

i think anything within this range.. look for internal headsets..

FSA ZS Headsets

Ritchey Road Headsets

here is an explanation on the HS by CK...
http://chrisking.com/files/pdfs/Int20HeadsetsExplained.pdf

the headset can be changed manually without tools with some risk... you need a flathead screwdriver to get the bearing seat out of the steerer and the cups out of the headtube...

a mallot and a bit of dexterity should get the new cups and seat in... i said risk in your case being having a carbon headtube and risk whacking onto the wrong place when getting the cups out...

the cassette needs a tool which is not cheap and an old chain to unlock the cassette lock ring...u might as well pay for the service charges...

---

Added on December 2, 2012, 3:50 pmclose eyes and pay money...

This post has been edited by butthead: Dec 2 2012, 03:50 PM

even with a bad back?

waste money lar... kasi olang buat.. bizman talk..

re-define a bit...

isn't that the point? to get a huge azz bar drop at the risk of breaking your back...

i meant the headset

---

Added on December 3, 2012, 9:31 amchicks will dig it wer...

---

Added on December 3, 2012, 9:33 ambuy that deda adjustable stem lar... when normal riding set it pointing to the sky... when chicks in sight, immediately drop it down pointing to the ground...

This post has been edited by butthead: Dec 3 2012, 09:33 AM

taruh quick release lar... malaysia boleh mya..

not so awesome when the paper has to come out from your wallet... haha...

custom usually means custom pricing as well...meaning no standard in pricing...meaning no need follow rules...meaning how sharp their meat cleaver is...

but yolo rite and end of the world is coming... so wtf rite...

life is so confusing...

---

Added on December 3, 2012, 10:57 ami need to go to mars

---

Added on December 3, 2012, 10:58 amwtf, monday blues...

---

Added on December 3, 2012, 11:00 ammust go home watch aliens quardrilogy and mission to mars tonite...

---

Added on December 3, 2012, 11:02 amastro is not interesting, radio is depressing, internet is boring, porn is no longer entertaining, bike feela lousy, food tastes bland and drink is tasteless...wtf

---

Added on December 3, 2012, 11:03 amaes everywhere...ufo nowhere to be found

---

Added on December 3, 2012, 11:07 amfingerboy won wdc...sexybank still not yet granted worldtour status

dafug dafug dafug

---

Added on December 3, 2012, 11:20 amwww.baikbike.com/energizer-cancelled-2013-night-run/

energizer bateli koyak..haha

This post has been edited by butthead: Dec 3 2012, 11:20 AM

i meant sebastien vettel lar... F satu

no one says it's hard... jus no point getting the tools for a one time thing when the bike shop can do it...

the sram powerlinks can be disconnected with a needle nose plier... to hook it back up.. jus align the plates and put force on the crank in the direction of a normal pedal stroke and the pins will slot back in...

cutting chain is inevitably a job for a chain breaker... no escape...

old days where got so much tools... jus flat head screwdriver, rubber mallet, wood wedge and a steel tube larger than your steerer tube to bang in the bearing seats and cups...

of course if you sayang your carbon frame... then you have to spend it on the cup presses and stuff lar...

spot on...

ur hands so powderful?? i am never shaking hands with you ever...

multi tools chain breakers are lousy... they are jus for road side fixes and usually harder to use due to the size...and as you fiddle with the tiny chain breaker... you risk bending and breaking the push rod that pushes the pin out if you masuk the wrong angle...

it'll work... but as the pins shrinks smaller... the little piece also grows smaller and also easier to break.. and if it breaks... your multi tool will be not so multi anymore...

like that.. you need to go bike shop work a couple of months first...

the park tools is the least of your worries financially... when you start needing a snapon tool storage cab...


you're screwed epically... it might cost more than your bike...

this month end got christmas lar.. got new year celebration lar...

you know... chicks everywhere...it'll be heaven... why go to competitions where you see fugly chicks with ripping muscles and the smell of sweaty armpits... WTF!!! dude...

but then again... there is this question of 20th december 2012...


and it comes before christmas or new year... so.. blank will be the least of the shit you have to worry about...

---

Added on December 3, 2012, 3:33 pmEUREKA!!!

i know what we should do... let's do an "end of the world ride"... we invite all the pretty chicks and shit...

at the end of the ride.. it'll be an orgy or watever you like "carbo loading", bike shop break ins or any other things that come to mind... we are all f@ked either ways rite???

if shit doesn't happen... we'll be spending christmas in a jail cell...

This post has been edited by butthead: Dec 3 2012, 03:33 PM

well... that's the idea behind 20-12 rite?

you either end up getting massive population increase by september 2013... or there will be lots of nonsense going on for the days leading to 20-12... haha

it'll be mayhem... so.. this buggers who went for the lynas thing... apasal buat susah susah leh... the world is coming to an end anyways... if i were them... i take all the bribe money i can first and spend it buying feraris, lambos, porsche... mana tau before they send the crates of wretched shit over also malaysia sudah hangus along with the refinery... hahaha

---

Added on December 3, 2012, 4:51 pmsuddenly... i am a Nazi...





This post has been edited by butthead: Dec 3 2012, 04:53 PM

that makes me the jester...

in my wet dreams... maybe it had happened before...

---

Added on December 3, 2012, 6:35 pmi don't think chicks like dudes tat talk c0ck in real life... they like the smooth operators rather than c0ckers... haha

being funny is one thing... talk c0ck is 180 degrees another thing...true story

This post has been edited by butthead: Dec 3 2012, 06:36 PM

most likely 1:50

wat do ya expect dude... we got all sort of weirdos here..

if it is that good.. you would have seen them all around...

if he is on a tight budget with next to no expectations.. it is something you can't stop him from doing...

else, just do your best to lay him out the possibilities of his choice and let him decide for himself.. if he still proceeds forward with what you see as a dead end... so be it and god bless..

---

Added on December 3, 2012, 9:52 pmand land ourselves with more debts? thanks, but no thanks...

This post has been edited by butthead: Dec 3 2012, 09:52 PM

this maybe? i've been liking it for quite some time..


wat to do... need disc mar...

jelez...carbon's little brother

---

Added on December 4, 2012, 3:22 am

looks like SM leather fetish...

---

Added on December 4, 2012, 3:26 am

---

Added on December 4, 2012, 3:27 amare you gonna trust this???



This post has been edited by butthead: Dec 4 2012, 03:27 AM

everything is on par with your doraemon

i thought you always say is caad10

no point having a UCI compliant bike unless you plan to enter any UCI endorsed races...

this is much cooler... a legend in the tri community although it's fairly dated carbon technology.. zipp 2002


next best thing to the lotus bike chris boardman rode...

friend caught one being sold off singapore for a very cut throat price in my opinion... but it's a piece of history...