Currently the X8C is sold in most online stores for RM450-500 and X8G is sold for est.RM700.I suggest you order the X8C and purchase the camera frame from the G,you can find it in Aliexpress or Symatoystore.com for $10.You can use the clip that holds the frame to attach an sj4000,xiaomi etc.

Pre flight tips & maintenance:
-Break in the motors by running it on low power for 12 mins without taking off before flying it for the 1st time,this ensures the motors have a longer life

- take it slowly on it's first few flights by warming up the motors for 20 sec before takeoff and not taking it too high and fast.Or else,the motors would be too stressed and fail earlier.
-Make occasional maintenance to the motors i.e. greasing the bearings,cleaning the gears.
-Finally,make sure your camera setup is below 120g bcus any more than that and it would be unstable and much shorter flights...

Hopefully you'll enjoy it and mod the heck out of it

This post has been edited by Lez Pall: Nov 4 2015, 01:47 PM

xD


Damn...... really.

hmm..... u ordered from banggood?

Yup, last time i got mine arrived in 2 days, get it here: http://www.banggood.com/EasySky-ES-9908-Dr...6363706201312DW


Btw sharing cool video this plane can do, aerial 3D mapping:

Videos:

3D mapping/scan my bicycle using my home made FPV600 quadcopter, technology is awesome!:

Video:

Hubsan just started selling this new product, brushless with dual GPS for only 899 CNY (limited time promo) but the gps now only limited to china area only :/

http://cn.hubsan.com/productinfo_13.html
http://hubsan.com/productinfo_21.html

This post has been edited by xDragonZ: Nov 9 2015, 06:20 PM

What kind of camera and setup u r using? Any fpv camera an do this? I got some knowledge about APM & Tower app on Android, but what do I need to setup and do this 3d scan thingy?


This post has been edited by davidwyl: Nov 14 2015, 11:48 PM

I use RUNCAM HD low FOV lens with tlog sync. Check this software: http://alternativeto.net/software/reconstructme/

Wow! nice 3D mapping there!

Mine to share what software you use for this mapping ? This is really amazing!

This post has been edited by mkmobile: Nov 16 2015, 11:37 PM

u snap the pic manually? or record video when flying? any setting on your runcam ?

- removable battery
- can be configured and settings changed without a computer
- 1440p at 30fps and 1080p at 60fps
- digital image stabilization
- image flip
- surprisingly low latency on the live video feed
- Wifi capable (when the app arrives)
- will run on 2S to 4S external power
-GoPro compatible mounts
-50 grams

Looks really interesting,especially the 1080p 60fps

Snap via timelapse.

oh wow, nice video. question, for landing do you need to control or the software do it all for you? I'm very interested with this, I'm beginner to rc glider.

This post has been edited by WebDpot: Nov 25 2015, 09:07 PM

I always manually control my own landing because i don't trust software since auto landing 80% more likely to bash and smash your plane to bits unless its properly tune....which is why most people you see on Youtube use big pole of net to catch or parachute to land their plane.

This post has been edited by SupermotoXL: Nov 26 2015, 09:54 PM

anyone have a copy of software and driver for simulator usb dongle?
i have phoenix rc 5 and the cable, but i misplaced my installation cd years ago. please pm me if u can help out. thanks guys

Enjoy flying my beautiful Sunday on this two historical plane at the beach early in the morning:

Videos:




This post has been edited by SupermotoXL: Dec 1 2015, 08:21 AM

Building f450 with pixhawk flight controller, tarot retractable landing gear, sunnysky x2212 motor.


Attached thumbnail(s)

Hi guys, new here and hope to get advise from sifu-sifu here. Anyone here from Melaka please PM if interested to meet.

I have been flying JJ1000 and U807, find them a bit small to see their orientation when fly further, looking for bigger quad now.

May I know where to buy a mod Devo 7E? Thanks.

Hey there, any pilots from Miri?
Need to know which plane is best for beginner..
Previously flew v911 and v212 quad before

if plane, go get simulator n then plane glider type
if u play quad before i assume u use mode 2
get good transmitter mode 2. at least turnigy 9xr with frsky djt module.

my next project. build small coroplast low wing plane for my asp .15 engine
my plane now too big for the engine.

then try build foam ft explorer for fpving
planning to put cc3d fc + gps
anyone use cc3d on plane?