u can try HUawei E372 or ZTE MF680,.. both is available around 300 +/-

afaik mf680 no external antenna and cant mdma right? what else differs them?

ZTE MF680 external antenna hole using = TS-9 convertor

Huawei E372 external Antenna hole using = CRC9 convertor

price is different as ZTE MF680 much cheaper than E372

last is personal preferences choices

Huawei E372 is much more stable than MF680 thanks to the low heat

If you plan to modify, go for MF680

If you just prefer the stability and you don't mind the extra speed, go for E372.

Hi guys, which router supporting Huawei mf680 modem?

care to explain the bolded?

is either huawei E372 or ZTE MF680
currently dont have Huawei mf680 modem though
refer to first pages,

---

Added on September 20, 2012, 2:31 pmwell ZTE MF680 is pretty stable and works like a charm for me too,..

as for heat wise yes E372 is a bit lower compare to ZTE MF680

but i believe higher performances = higher heat

This post has been edited by chuahcs79: Sep 20 2012, 02:39 PM

MF680 perform faster.
BUT, if not cooled properly, it will slow down.

well i guess i am Highspeed wannabe catergory

love the bold part

tonight will test maxis speed in iPoh...

not sure got QoS 42000 or not

certain area in ipoh have,..

i know near by Tune hotels area very high speed

Does anyone face this problem before ? What is the better solution to get 42000 in QOS ? I have complained to maxis but still no answer from them

This post has been edited by lwk523: Sep 20 2012, 06:49 PM

are u on public IP ?

try to walk in maxis to change to newer batch of sim ( try your luck )

or

wait for your area base station to upgrade

or

call maxis up ask them to lock your signal permanently to another tower which might have higher speed,..


i get that for almost nearly 1 years, and speed constent 2~3Mbps

Hi I hav a silly Q here.
Do I need to run the Maxis dialer forst before using mdma? Or vice versa?

it true 100% chuah

i tested myself between my college and home.

at home i use cooling fan to cool down my E372, but at college no cooling system i use

and the result is,the performance drop very quickly although u get Good signal there and not stable too..the modem also very hot

at home i got pretty nice speed using with cooling fan here.

so, the fact are more performance/more speed = more heat like chuah had said before

better using cooling fan to maintaince the performance/speed

tq

maxis dialer & MDMA both = dashboard dialer,

u only can run 1 dialer at single time

The biscuit tin mod is the best mod so far, doubled my speed and increased my signal

glad u decide to tested it out on everything,

some user did PM and blame me say i bla bla bla on first pages when they only read one small section and didnt bother to take their time go through the whole first pages of this thread,

after all because of my E372 sucide and jump from very tall shelf on wall on top on woofer and save my TL-MR3420 absorb all the impact break death, that's why i decide to try ZTE MF680,.

HUawei E372 is actually quite hot as well , not as cool as people think,. most user didnt add cooler system because 3.6Mbps or 7.2Mbps modem is much lower performances = come with lower heat,.

Thanks again for your feed back, great to know it did work for u after all

---

Added on September 20, 2012, 7:19 pmyea that is confirm double up / will max out your connection speed,

becareful of these type of reflecting signal method as it reflecting the heat too

This post has been edited by chuahcs79: Sep 20 2012, 07:19 PM

MF680 purple light Turbo 3G+

Slight disappointment, test later as this time considered as "congested"

just now whole afternoon my ZTE MF680 blue LED blinking only, no purple LED at all,

and just now it auto back to purple LED,.. whewww

may be penang rain too heavy this whole morning effect the towers