my super weird speed at setapak.

good job lahh btw MF680 "3" assume Turbo 3G+ as DC HSPA+ huh?

Does maxis a bit slow these few days? 

Does maxis a bit slow these few days? 

early 7.30am at Kuching

  U live in Kuching oso? same with me... May i know which part of kuching support 42mbps maxis?

Tabuan Jaya, bro. 

As promised in the previous post, all ZTE users, please follow these steps to get MDMA work with your modem. However, a piece of reminder that MDMA is still best worked with Huawei modems.

You will need to put in a command on your modem for your computer to recognize it as a dial-up connection (RAS). Steps to get it done (Windows 7):
1) Click on "Start" menu
2) Right click "Computer"
3) Click on "Properties"
4) Click on "Device Manager"
5) Click on "Modem" tab
6) Right click on "ZTE Proprietary USB Modem"
7) Click on "Properties"
8) Click on "Advance" tab
9) On the "Extra Initialization Commands" enter:
For Maxis postpaid: at+cgdcont=1,"IP","unet"
For Maxis SKMM or prepaid: at+cgdcont=1,"IP","bbnet"
For Maxis BB: at+cgdcont=1,"IP","maxisbb"
10) Click "OK"

No, you are not done yet. To create a dial-up (RAS) connection, make sure you disconnect your broadband and close the dashboard first. Follow the below instructions (Windows 7):
1) Open Network and Sharing Centre
2) Set up a new connection or network
3) Connect to the Internet
‎4) Choose Dial Up and click "Next"
5) Set the *99# as dial number
User name: leave it blank
Password: leave it blank
Connection name: MDMA
6) Click "Connect"
7) After the connection is connected, disconnect it.
8) Click on your bottom right screen computer alike icon
9) Then right click "MDMA dial-up connection" and click "Properties"
10) Click on "Options" tab. In "Dialing Options", UNTICK everything EXCEPT "Display progress while connecting".
11) In the "Redialing options" insert the following options:
Redial attempts: 99
Time between redial attempts: 1 second
Idle time before hanging up: never
Then TICK Redial if line is dropped
12) Click on "Security" tab
13) On the "Allow these protocols" UNTICK all EXCEPT "Unencrypted password (PAP)"
14) Click on "Networking" tab and a pop up window will show up and just click "Yes"
15)  Click "OK" to exit the settings
16) Run MDMA
17) Click "Connect"

guys help me i dont understand the bolded part... im on biz68 what should i enter? sorry noob here 

My speed at this moment. E372, RSSI: 93dBm, QOS 16000/8640

Nice speed for the signal which is not good.

I'm personally using maxisbb, actually you can try one by one and pick which 1 is the best for you.

Ur QOS 42mbps? what modem u using?