Head towards nsk direction from bukit tinggi klang. That road, probably can see Hankook signboard on left. Can't remember the shop name also unless I find back the receipt.

Hi, how much is the aero tail lamp cost? Cost mine the back portion of the lamp brittle already. Gonna fall off.

Anyone experienced passenger door failure? Before this it was only left back passenger door cannot open from inside, then it totally fail cannot open at all, now right back passenger door cannot open from inside, only able to open from outside, driver side and front passenger side functioning fine, could it be central lock system problem? Any workshop recommendation?

is the timing belt installed correctly?
one tooth off the timing mark enough to cause problem.

rm100 per pair if you're lucky, market price is around rm150 per pair as i saw recently.

cannot open as in the door cannot open or cannot unlock? if cannot open, linkage inside the door fall out of place; if cannot unlock, door lock actuator aka door gun is dead.

One side cannot unlock at all, one side cannot open from inside, but can unlock and can open from outside, there is a child safety lock installed to the door, i tried to unlock it but cant push it to unlock side

mechanism and/or linkage jam most likely, send to workshop should be able to get it fixed.

Thanks Jaesern for the reply. I ask the spare part shop, they quote 700 per pair. Where do u see 150 per pair?

new, rm700/pair, no surprise, but please don't ask me on new, i never look at new before, can't afford. rm100/150 is second hand and/or halfcut condition.

hey guys, there will be a meet up/tt this Saturday night 10pm at pj, exact location tbc. pm me or kllam for more info.

nice.will try to make it if i dont have any plans.


btw,my car seems to die whenever i stop at idle (waiting for traffic lights, pay parking). it didnt die right when it stops, but maybe 5 seconds after. is it the aircond comp? since if i dont turn on the aircond it can idle just fine :/

Hi guys , I'm planning to get a kenari for city drive. Does kenari have any major problem? I searched the web got some said kenari's absorber easy to give up , handling bad ( I think I can accept it since use to city drive onli) , many sound , other than that still duno yet. But I hope u guys can share ur kenari experience with me XD. Thx alot!

nope.no major problem iinm. depends on how you maintain the car really. absorber+handling can ask sifu jaesern and kllam mine's pretty reliable-ish if i didnt meddle with it so much. a great car for city drive due to its visibility.

we're planning for another tt meetup on 23rd dec (fri) night 10pm at Damansara Perdana. pm me or kllam for more info.

TkTunG, join us for meetup to understand more?

Hi guys am looking for some kenari standard part, if anyone got lying around and may want to dispose of it.
1. Kenari front bumper support bar.
2. Kenari front aerosport red bumper.
3. Kenair spare tire. R13.

My location is selayang and rawang.

Tks

This post has been edited by aero-: Jan 13 2017, 10:21 AM

Got some inquiries also, would it improve handling if we change the stock anti roll bar to ones from yrv? Tks

i have 13" spare tire, let me know if you're interested, collect at Puchong, i'm lazy to go too far.

unlike Wira, there is not support bar for front bumper on Kenari.

yrv antiroll bar won't fit in directly, not plug n play stuff.

this may be a month late.. but things to look out for:

1/ leaking flywheel oil seal
2/ leaking valve cover (ull find engine oil at the spark plugs)
3/ driveshaft has quite short lifespan (especially for non P2 ones)
4/ engine mounting has quite short lifespan (especially for non P2 ones)
5/ aircond compressor can also kaput


3 & 4.. for ori P2 can be quite expensive. about 1k each set....but they last super long.

non P2 can get about hald the price, but will only last half as long.

The bar is vertical, 2 from the bumper screw onto it.
Yrv bar need heat bending, worried it will break.
Puchong arrr.

When will new Kenari coming to Malaysia ??

Anyone has Original Kenari Steering with Good condition, kindly PM me.

Thanks