@mcmicheal

Get a cheaper one AC Accelero S1 Rev.2 for about RM120

Cool and quiet ...

Ah... i also planning to get that.
How much for the 2 fans module ??

just get a pci blower.. it will do the job nicely... no need fan module...

hello guys.

i have a prob.. my graphic card is installed upside down, meaning with the fan facing downwards. and recently the fan fell out of the heatsink and broke.

i would like to find a replacement for it, and finding a cooler that come with fan which is not glued to the heatsink (with casing or screws).

any suggestions? coolviva that u all mention in the early pages is not coolviva pro right? is coolviva pro also lousy?

bro how in earth can ur fan fell down mind showing some pics of it... quite interesting la ur problem...

er the fan was glued on to the heatsink, with 4 dots of black colored glue. and my stuipd dell dimension 4700 make the G card have to be installed upside down, with the fan facing downwards. so as time goes by and with constant vibration of the fan... the glue not sticky liao the fan drop n broke a fin. lol

wow glued one... the maufacturer sure very stoopid one.. get some zalman one or coolviva can do the job la if u wan for normal use only.

what do you mean 'upside down'?
normal ATX casing can only let you install the graphic card with cooler facing downward.

I think is the "fan blade" that fell down...

er normal ATX all the fan face down de a? i tot dell stupid oni hehe.

the fan, with some soldered temperature sensor, was stick to the middle part of the heatsink. So both of them fell down.

The blade hit the base of PC casing( the location very near to ground) and 1 of the blades broke.

The card is colorful 8600UE. The heatsink look something like zalman VF700 but not zalman la. Since got this kinda problem already, i would like to find cooler the have the fan securely fixed onto the heat sink, preferably with casing like the CM coolviva pro. But like a lot ppl say it no good.. budget around 100 oni lo.

The card here

This post has been edited by lennnostra: Apr 16 2008, 06:13 PM

@mcmicheal

It's about RM60 at the LYP shop ... C-Zone if not mistaken ..

but no need to buy one just get a 9 to 12cm fan and placed right from the front to blow air through the card and exhaust through the rear end ..

that would be just brilliant enough ...

Just wondering, can we install the S1 the other way around like TR HR03 in a normal ATX case? I mean, have the fins at the back of the GC.

Auras Fridge JES-988 Passive VGA Cooler




REVIEW:
http://www.madshrimps.be/?action=getarticl...394&articID=815

This post has been edited by yahn: Apr 21 2008, 01:22 PM

don't think can do that bro...

Hey guys,

I'm planning to get AC S1 Rev 2 on my 88GT. But, the problem is i am not sure whether it fits well in my CM 331 Casing. Anyone with any past experience to help me?

Hmm, which cooler u all suggest for 2900XT ar? budget around 260 or so.. I wonder in malaysia do they sell the AC 2900 Extreme ar =/

bro u also using x2900xt ? was wondering what's ur stable OC core/mem ?

What is the easiest and effective way to clean the stock heatsink of Geforce 8800GTS 640mb? Should be stuck with alot of dust by now. Should i blow compressed air from the exhaust and hope the dust clears from the intake fan area, or should i blow from intake and hope the dust comes out from the exhaust?

best is take out the cover and use brush to clean the area...

You guys got any idea to cool this thing?

Idle = 70 C
Load = 80 C

Please help me!