Outline ·
[ Standard ] ·
Linear+
:Official Dopod 818 Pro/HTC Prophet/XDA Neo Club:, Discuss it here...
|
termignoni
|
 Aug 8 2007, 04:58 PM
|
|
QUOTE(MoNnY @ Aug 8 2007, 04:45 PM) problem is, i can enter bootloader... i can flash the PV_TEMP ROM... the RUU program says its successful but my PDA just reboots back to bootloader... and i can't use the 2.15 from dopod asia because my ipl/spl is 2.20 ur 818 Pro is a G3 or G4? u sure u flashed the correct ROM from the PV Temp? have u tried the NVID ROM instead? G3 devices:IPL x.xx.0000, SPL x.xx.000.0 (this is shown when you reset) G4 devices:IPL x.xx.0001, SPL x.xx.000.1 (this is shown when you reset) This post has been edited by termignoni: Aug 8 2007, 05:08 PM |
|
|
|
|
|
karhoe
|
Aug 8 2007, 05:01 PM
|
|
|
QUOTE(MoNnY @ Aug 7 2007, 09:54 PM) my dopod is dead its stuck at the bootloader screen... now i can still flash one or 2 NVID Roms, but after the RUU on my computer tells me its finish, my PDA just reboots and goes back to the bootloader.. looks like have to pay dopod service center a visit.. one look i'm sure they know i play flash liao... wonder worst case to change the ROM chip how much would that cost Nah, its alright, you got bootloader, you are save, I think you need to format BINFS
Added on August 8, 2007, 5:03 pmPlease read more from xda-developers forum http://forum.xda-developers.com/showthread.php?t=310452Well, my friend bricked his Dopod 577w, went back to Glenmarie, and they didn't even know he SuperCID  This post has been edited by karhoe: Aug 8 2007, 05:17 PM |
|
|
|
|
|
MoNnY
|
Aug 8 2007, 05:30 PM
|
|
|
oh, forgot to mention i can't hard reset.. i can get to the part where it says 'Press Send to restore factory default, Other keys to quit' when i press Send, it says Format FAT Partition and followed by Format is Failed then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Added on August 8, 2007, 5:31 pmQUOTE(karhoe @ Aug 8 2007, 05:01 PM) Nah, its alright, you got bootloader, you are save, I think you need to format BINFS
Added on August 8, 2007, 5:03 pmPlease read more from xda-developers forum http://forum.xda-developers.com/showthread.php?t=310452Well, my friend bricked his Dopod 577w, went back to Glenmarie, and they didn't even know he SuperCID BINFS ? sorry... whats that ? yea.. i think i planning to give it to dopod.. what did they do to your friend's 577w ? This post has been edited by MoNnY: Aug 8 2007, 05:31 PM |
|
|
|
|
|
tarumi
|
Aug 8 2007, 10:47 PM
|
Getting Started
|
QUOTE(benedictHHH @ Jul 30 2007, 10:44 PM) hey zickey ..... add me on msn tsooi1@gmail.com it is actually all in one WM6 plus Touchflo ..... 1st is the PV_Temp . Download the file. Inside it has a G3 or G4 version Reset ur device, check ur IPL and SPL . If it ends with .0001 it is G4, else G3. Connect PDA with Activesync Run G3 / G4 version and wait till 100% . Step 1 Done ...Dun do anything 2nd... Run PdaViet Wm6 4.0.0.0.6 TouchFlo Hard Reset ( camera + voice command button, then cucuk the reset lubang) Done ... i cant even run PV_Temp....why...  .....its says communction error 260...huhuhuh...i tried so many time....y aa???? |
|
|
|
|
|
termignoni
|
Aug 9 2007, 10:21 AM
|
|
|
QUOTE(tarumi @ Aug 8 2007, 10:47 PM) i cant even run PV_Temp....why... .....its says communction error 260...huhuhuh...i tried so many time....y aa???? what version of activesync are u using? u must sync ur 818 Pro 1st then run PV_Temp.. it's best if u uncheck all boxes in the "files to syncronize" boxes.. |
|
|
|
|
|
kenzo
|
Aug 9 2007, 10:53 AM
|
|
|
why ark is there is a problem upgrading to wm version 6
|
|
|
|
|
|
MoNnY
|
Aug 9 2007, 11:30 AM
|
|
|
make sure u have activesync 4.5
remove SD card, remove SIM card before flashing..
flash PV_Temp... do not touch PDA after flashing is complete..
it will sync with activesync and ask for settings, just sync as guest..
procedd to flash WM6 ROM...
after its done, hard reset and u have WM6
|
|
|
|
|
|
tarumi
|
Aug 9 2007, 08:13 PM
|
Getting Started
|
Tq guys..now i done the PVA part...but when i wannna to install pv 4.0.0 touch i dunno where to click...got so many file..tq..
|
|
|
|
|
|
MoNnY
|
Aug 9 2007, 08:42 PM
|
|
|
click on the upgrade_ROM batch file
just search for the ms-dos batch file
|
|
|
|
|
|
tarumi
|
Aug 9 2007, 09:01 PM
|
Getting Started
|
QUOTE(MoNnY @ Aug 9 2007, 09:42 PM) click on the upgrade_ROM batch file just search for the ms-dos batch file done..the system seem to initial just fine....but my pda come 'unknown status'.. what happen...i already do the hard reset few time...im afraid it will affect the PDA.... it say "could not update itsutills.dll to the current version..maybe it is inuse?" i'll try restart my device or restart my activesync..tq This post has been edited by tarumi: Aug 9 2007, 09:10 PM |
|
|
|
|
|
MoNnY
|
Aug 9 2007, 11:37 PM
|
|
|
means got error..
u have to reflash the WM5 NOID
then try to flash WM6 again...
from the start, don't touch the PDA until the upgrade is complete, then hard reset...
|
|
|
|
|
|
tarumi
|
Aug 10 2007, 12:07 AM
|
Getting Started
|
Whoa.... after doing lot of attempt i finally got it...  WM6 + touch flo.....nice woo... gotta test something...hope it will not hang...  |
|
|
|
|
|
MoNnY
|
Aug 10 2007, 01:07 AM
|
|
|
if can, use the latest PDAVIET rom
4.0.0.0.5b Cross..
more stable than 4.0.0.0.6
the Touch ROM has issues wiht the HTC Home causing freeze at boot screen
|
|
|
|
|
|
benedictHHH
|
Aug 10 2007, 01:49 AM
|
|
|
Ya guys... it is true.....backup all ur stuff just to play safe... Mine just hang on bootscreen today |
|
|
|
|
|
tarumi
|
Aug 10 2007, 08:43 AM
|
Getting Started
|
QUOTE(benedictHHH @ Aug 10 2007, 02:49 AM) Ya guys... it is true.....backup all ur stuff just to play safe... Mine just hang on bootscreen today got several prob here.. the HTC 3d touch function is not fully functional... time wizard is not working.. cant write an appointment.... the most critical function i need.... so..how to setup it back to WM5..this WM6 is suck coz no fuuly function.. |
|
|
|
|
|
MoNnY
|
Aug 10 2007, 01:01 PM
|
|
|
all working....
for me its ok...
did u hard reset after upgrading to WM6 ?
cause your problems seems like u didn't..
for touchflo, press com button..
it might not pop up till u move your finger...
its like that
anyway, as i said, the 4.0.0.0.5b cross is better...
go to forum.xda-developers.com and find prophet mobile 6 for more info..
oh, and i just sent my dopod to the glenmarie service center.. will see how that goes
|
|
|
|
|
|
termignoni
|
Aug 10 2007, 03:07 PM
|
|
|
i have no probs at all using 4.0.0.06_Touch.. the only prob that i faced is when installing it and also when it won't accept my password to unlock.. kept saying password invalid whereas that's the password i set b4.. in the end i had to hard reset.. other than that, it's smooth sailing..
|
|
|
|
|
|
benedictHHH
|
Aug 10 2007, 03:37 PM
|
|
|
You try it for a few days with the HTC Home Plug activated in the My Today Screen...When u add some stuff or update the weather.... It will crash on your reset...Stuck at load screen... |
|
|
|
|
|
cabi11
|
Aug 10 2007, 04:18 PM
|
New Member
|
PDA VIET is the best for me! I'm using 4.0.0.0.5b version now and its really cool! Unlucky for me it does'nt have blimkeys to ease me when replying to sms. Others are working great.
|
|
|
|
|
|
tarumi
|
Aug 10 2007, 04:46 PM
|
Getting Started
|
im so curious right now....all im doing is follow the step n install the pda touch 4.0.0.06_touch....but when i reset my pda..the OS show 4.0.0.0....is it something i miss???
btw...how to setup 4.0.0.5b ??...did i need to change the Pda_temp or i just install 4.0.0.5b without any change.....TQ
|
|
|
|
|
Quote
0.0268sec
0.42
6 queries
GZIP Disabled