Yes, supposedly. Never encounter but I disabled it as well as advice by many reviewers. U may do that after last firmware update. Now u can control the level. I just disabled it.

yrs super noticeable.

eh.. sorry in advance but heck even on astro also will very apparent.

its like the movement of ppl very fluid with very lesser camera movement.
best way i know how to describe the "soap opera effect"
u know how they used to show italian dubbed malay drama on tv2 in the afternoon. its like that. but on movies.

Some ppl love those effect. But not me. It can be disabled then its good. Maybe one last question before i really decide. Is 47" big enough for a satisfying 3D viewing?

Unless u leave in a large bungalow or with spacious living hall, get that 55". Or else just sit very far distance away to enjoy optimum view. For me , Im happy with 47" with optimum view. If u want to climb into the screen, then view the 47 " at very close range say 2 feet away. Large screen doesnt necessary means good. And 3D doesn't mean pics popping out to eat u or so....it's deapth. Many tot by buying large screen , one can actually enter , feel & touch the actors in that movies particularly the x rated scenes.

Ya ...just dont expect so much.

This post has been edited by Xstan: Sep 22 2012, 03:49 PM

My 42LM6700 just arrived today. All I can say that it's awesome.
It's really worth every penny. XD haha....

How come maximum refresh rate for this TV reported as 70 Hz
but only selectable up to 60 Hz only..?

Hmm looks like another person who never had a 3d gaming monitor

120hz native is for 3d since ure running two video streams overlaying each other.
but the fps for both is still around 24/1001. so u run tru motion to get it be synced.
24/1001 for most BD and 30/1001 for most DVD.

60hz is the basic for most inputs

when u run trumotion u increase the fps to match the hz or exceed it.

get it??

trumotion tech was essential in the early adoption of HDTV as u get ghosting because of the panels delay.
But nowadays with the current tech its mostly eliminated since the source video fps is not that high enough to cause any issue.

so whats with ppl doing 240hz,480hz etc
hmm btw i forgot to add LM9600 is 480hz.

the higher the hz. the more obvious the tru-motion effect will be.

i find running tru-motion : user level 1 is just enough for my movies. Smooth is 3 which i find very distracting and annoying.

This post has been edited by cstkl1: Sep 22 2012, 08:38 PM

Noticed on the official LG Malaysia website, RRP for 42LM6700 went down from RM4400 to RM3699. That was fast ...

The price I just bought yesterday was RM3,050 + RM260 Adjustable Wall Mounting
with FOC 4 pcs of 3D glass and High Quality Gold Plated HDMI 1.4a cable.

May i know where do you bought your TV? I would like to survey and have one as well.

anyone know what's the differences for

42LM6700 (RFP RM3699)

42LM6200 (RFP RM2999)

?

1.Local Dimming n higher contrast on the panel
2.Magic Remote
3.Wifi Built in (also has intel Widi. direct connection without router aka wifi AP)

Hi guys, where to get this LG 55LM6200 more cheaper than what myqd mentioned here $5400 because i've asked TBM it cheras quoted me $5999 compare with bangsar $6099? Any number to that shop? Thanks

update: Onking, Pdn Indah $5699, Toong King, Kajang $5500.

This post has been edited by quintesson: Sep 24 2012, 04:28 PM

Guys,

Got 1 prob with my media player (AC ryan) where the audio is lag a bit. Already ON the AV Sync & set at -5(Min) for the SPDIF but still lag. Tried Bypass or OFF the AV Sync yet still prob. My other inputs which are Byond & PS3 also got audio lagged but problem solve after i set the AV Sync to -5. I didnt use the TV speaker & didnt check whether it is ok if using TV speaker. Before this no problem & no need to sync if i directly output the digital optical audio from my media player to my HT. Any heads up?

This post has been edited by decavalera: Sep 24 2012, 05:39 PM

Its -5. Suspect 0.5 seconds for each level. NOT 5 minutes dude.

Use ure tv speakers to sync the sound,subs and mouth movement.

Min = minimum.

So need to use tv speakers. Well, gotta live with it then as i prefer to use my HT.

its like this the tv speakers is in sync with ure audio since its getting from hdmi.
Ure ht is the one thats on a different time.

so like mine appletv to tv hdmi
tv to panasonic soundbar optical.

so delay the soundbar to be sync. I set mine at -3. Watch for the spoken language. There should be no echo.
Disable the tv virtual when ure doing this.

btw disable tru-motion also.

This post has been edited by cstkl1: Sep 24 2012, 06:56 PM

Thanks bro,
Improve a bit after i disable the tru-motion. My HT only can delay the sound, can't set for faster/earlier.

Hmm. Tried use as HDD direct to HT, which means audio directly to it's own HT speaker & video from HT to TV, supprisingly the audio is still lag.

Finally tried as HDD direct to TV & problem solve. The audio came out from the HT no more lag. No need to AV Sync too. Just no DTS from the TV.

This post has been edited by decavalera: Sep 25 2012, 11:47 PM

Does anyone here already updated their firmware recently..? I still can't find what's the update features.

whats ure amp?

i have no issue with my RX-V673

Cheap one only. Philips HTS5591/98 with 1000W RMS (thats why initially i aimed for Philips TV). Have the ARC output but so far cant use with this TV. Just email Philips support, hope they can solve this ARC connectivity issue. Cant Simplink too, so far only my PS3 can Simplink.

This post has been edited by decavalera: Sep 26 2012, 07:47 AM