normal

same as you from the unifi.

---

Added on July 16, 2012, 1:08 pmya, is normal. my installation also need wait tm guy 1 hour, 1 hour is consider "ok", some can delay few hours or even didn't come...

This post has been edited by jeremy05: Jul 16 2012, 01:08 PM

tried on office streamyx same. The connection was reset.

I guess I am the lucky one
the TM contractor and Maxis guy arrived on time done their job pretty well.

ya, you're lucky guy!!

unstable? can you describe what you mean by unstable ?

Usually when disconnections happens, It says that connectivity to the DNS server failed. I want to set it to google dns but it seems that I can't find any options to do so

That means either you can disconnect and reconnect again. The DNS should be fine.
By setting to Google DNS, would it resolve the connectivity to DNS server issue should it fail again the next time ?

Kinda annoying when you're in a middle of a game and connections just goes poof. It might resolve, I don't know yet till I get to try it. Since the connectivity check says its always the DNS that's failing everytime I get disconnected

did you using cable or wifi, both connection also got this problems?

Both, not the connection to the PC/Laptop problem. Its the DNS that's screwing up I guess, first router I've seen that don't have the option to switch to my own dns

stability for:-
wifi 50%
lan 90%

sometimes need to reboot the router to get better connection..
so much pain in the $

Terry, fyi..the DNS setting is on the ONT device not Thomson router.

---

Added on July 16, 2012, 3:10 pmbro ryudell, for Wifi connection, what you can do is buy a pair of Aztech homeplug and you can use the Wifi from the homeplug which connect thru the powerline. It is more stable and stronger Wifi signal.

Can you post me this info just to check whether you are on the same router firmware version as mine.

Product Name: TG784n
Software Release: 8.4.3.x
Software Variant: ??
Boot Loader Version: ??
Product Code: 667917A
Board Name: DANT-P

Also, did you use notebook cooler for yr router ?

This post has been edited by wokan: Jul 16 2012, 03:12 PM

About a month after install Maxis Home, kind of disappointed with the router Thomson TG784n. Kinda overheat fast and WIFI will lag and after disable the wifi, LAN port not stable.

I am so much disappointed with the router.

you mean wifi repeater??

put cooler from the day it was installed for both modem & router..
so heat is not the issue here

Hi ahsiah, can you let me know what firmware version are you using? You can check on the Thomson main page
under Information. Should look like something below


Product Name: TG784n
Software Release: 8.4.3.x
Software Variant: ??
Boot Loader Version: ??
Product Code: 667917A
Board Name: DANT-P

Thanks.

homeplug, some kind of device that plug into your power socket to share internet thru the power line, got wifi version too...

Aztech wall plug wireless n extender

This post has been edited by jeremy05: Jul 16 2012, 03:25 PM

Owh, I'll go have a look. Totally forgotten about that

bro ryudell, is this yr router firmware version:

Product Name: TG784n
Software Release: 8.4.3.U
Software Variant: BX
Boot Loader Version: 1.1.3
Product Code: 3667917A
Board Name: DANT-P

can you confirm that?