Bro, i nk tiru design boleh?? Beli sticker online kat mane? Im really interested..

Wow Lawa ni ! Updated Bro! Welcome to the Club

Hi any1 know how to save the current tuned FM frequency into any 6 preset on the multimedia system?

I have read thru the user manual, but the user manual did not mention on how to save the radio station. So after I tuned to the favorite radio station frequency, what i needed to touch on the LCD screen or press on the physical button in order to save the radio station to the any 6 preset displayed at the left side on the LCD screen?

Once you have tune your fav frequency, just touch at any of 6 preset for about 2-3 sec to save your tune freq.

nak custom design pun boleh....sy boleh kalau nak tolong order, btw, 70 depan belakang. Atas, buat dgn jinx sticker.

---

Added on July 29, 2012, 12:25 amthnkyou! thnkyou!


This post has been edited by BaimHanifKamil: Jul 29 2012, 12:25 AM

Last I can recall, when I test drove a Saga FLX it needed to step more than ours to brake so it's just a matter of time when you get used to it. If you want more confidence in your brakes, then the only way is to change to performance brake pads first and see if you're happy with it or not.

thank u

Ready for work / college tomorrow guys? Gonna have Monday Blues again

anyone have idea on price of bumper + paint + labor ? for rear bumper ...thanks

Everyday morning, i start my car and the RPM will be maintain 1500. Just need to wait for warm up around 5 minutes, the RPM just will drop into 1000 only. Is that normal?

Yes. Normal. :-)

Besides that, when i switch on my air-con, the RPM just will drop a while once i heard "tak" this sound when im in "P" or "N" mode.

I though once the compressor kicks in which refer to the "tak" sound u mean..the rpm should have started to increase at that point and until the compressor stop then the rpm will drop back down to the point same as when the air-cond is not on.
Btw, compressor kicks in means the air-cond start to run and inject gas to provide u cold air which it wont run for 24/7, it will have a period of time around 5sec that the compressor will stop and rest then runs back.

This evening I heard "eeek, eeek, eeek" sound (similar grinding) coming from my driver-side wheel while driving. Brakes weren't applied. What could be wrong ?

maybe ur brake pad had reached the indicator?
when u apply the brake did u hear the sound?

Ok, i try to figure out more questions first.. Stay tuned..

No sound heard when brakes applied...
Should I replace it immediately or can wait a couple of months/weeks ?

just sharing here..i changed oxygen sensor at perodua sc last thursday and it cost me RM359. The problem was that orange LED light (engine icon) keep blinking at my speedometer area..

myvi ezi 2006
mileage 78+++

if no sound at all for all the time when u apply brake..then should be other problem I guess
but still..have a look/check of ur brake pad would be better? at least u know how much more ur brake pad left =)


Go back to the SC and tell them the problem that the engine check light is always blinking after u changed the sensor that time at the SC.
They will solve it for u by using a diagnosis device to check for the problem and solve/clear the problem/error =)

This post has been edited by -TJF-: Jul 30 2012, 02:26 AM

Weird enough, my car RPM also will drop when I ON aircond after cold start. It will start quite high at 1500-2000RPM then drop to ~800 when Aircond is ON.