i believe what he trying to say is the trip computer. well, for tinted windows, i got one free from SA and i can choose the level of darkness i want so that is more win for me.

for this type of problems i usually DIY rather than letting other people touch my car, because they doesn't have sense of belonging and the SC people have lot of things to do. actually mine too got that rattling sound on the both door panels when driving on harsh roads, else it quite like conti car
for no 1 and no 3 problems, i observed (when sent car for tinting) there is a tightening screw behind the door panel handle, each on top and bottom, can be accessed by prying open the top handle cover, its the clip type, then you can see the screw underneath it. unscrew and you can take off the remaining handle and can see a hole which you can put your hand inside and pull the electrical connectors for power window and central lock motors. then it is safe to pry open the door panel from top to bottom all around is the clip type, don't do too harsh because you need to feel the resistance to check whether there is a clip at that point. once all had bare opened you can start working applying double sided foam or acrylic tape around the door panel and the door itself if you feel that metal is touching with the door panel producing that rattling sound. usually i put it on near the clip area. you can also put more cloth inside it too . once done, assemble back in reverse order. the annoying rattling sound gone, only tyre roars will be the only thing you hear.

for the glove box, simple, apply foam tape around. put cloth or non slip mat inside.

forgot to report myself in. TS, help me to put me on the list.

Nickname: billy_overheat

Variant: Standard 07's Sxi

Transmission: Manual

Colour: Glittering Silver

Thanks TS!

myvi 1.5 fc better than 1.3??if compare auto.with auto

trip computer? u mean trip meter?
even the old cars with analog meters has trip meter too ma..i believe the 1st gen myvi and facelifted myvi has the same odo meter functions

Guys, I need advice on my Myvi engine issue.

My car engine started to make noise recently, and the engine noise only start to occur after driving for some time 15 mins+, and most obvious when accelerating from 40 kph speed and become more obvious the longer i drive, noise only occur when accelerating mostly  between (40-80 kph)  first time I took it to service center the technician said it is because im using ROM95 petrol. then i start using RON 97 for 2 months, but still the same noise exits.

So i took it back to service center and they said this time they have send report to HQ and wait for HQ engineer to inspect engine. Im SO disappointed to know that they can't handle engine issues.

anyway, any body faced similar issue in Myvi?

mine is 2009, Auto, Ezi model.

I thought I would give you guys an update on my engine noise issue.
So on Friday, I sent the car to SC early morning so that the technician would send it to HQ engineer visiting another SC in PJ
they found out that 1 pistons ring had fractures and all pistons need head cleaning due to dirt  accumulated.
they should be few picture, the fractures were barely can be seen (which was replaced), but the amount of dirt was quite alot. (shown on white paper filter before & after cleaning)
now no more engine noise and acceleration is more smooth now & can feel slightly more power and the FC is improved significantly. Now I'm relieved 

After i parked my car for long time (lets say after 5 hours), when i on the air con, i heard a loud "tak" sound. Then I off the air con and on again for second time, the "tak" sound not there anymore. This happened especially when i start the air con in early morning or when i am leaving office around 6pm. Anyone having the similar issue?

After i parked my car for long time (lets say after 5 hours), when i on the air con, i heard a loud "tak" sound. Then I off the air con and on again for second time, the "tak" sound not there anymore. This happened especially when i start the air con in early morning or when i am leaving office around 6pm. Anyone having the similar issue?

Updated Bro!
Well, It really depends on your right golden foot.

Theoretically, 1.3 is expected to have better FC especially during City Drive. 1.5 would be expected to have a SLIGHTLY better FC for highway drive.

changed the plate. cost me RM 90. was offered the carbon fiber plate but i rejected as i think the normal plate looked better.

err..i thought odo IS the mileage meter...lol
if yours is the extreme version..it has factory fitted tinted windows

changed the plate. cost me RM 90. was offered the carbon fiber plate but i rejected as i think the normal plate looked better.

Updated Bro!
Well, It really depends on your right golden foot.

Theoretically, 1.3 is expected to have better FC especially during City Drive. 1.5 would be expected to have a SLIGHTLY better FC for highway drive.

seriously number plate which covers the whole back without the bracket looks much nicerrrr. I should do that too haha

yap. seriously those perodua plate didnt looked nice. those font also not nice. so changed everything. really worth it. now im keeping the ori plate in the boot incase of emergency haha

---

Added on June 5, 2012, 1:44 amand looked like the sound from behind didnt come from ELR. might be from the umbrella inside the boot. will try to rectify. so far no other sound except from the rear part