i think if put properly, that ELR wont make any noise..mine is okay..

This post has been edited by megat89: Jun 3 2012, 03:38 PM

i used normal water tap not the HP type. when the battery taken out there is plenty of space for your hand to move inside the bay, at the gearbox area. to be safe wrap the electrical connectors with plastic bag.

ELR is the rear center seatbelt..

This post has been edited by megat89: Jun 3 2012, 03:59 PM

can u put a pic on how u put it?

like this one...it think in this position, nothing can produce noise..

This post has been edited by megat89: Jun 3 2012, 04:49 PM

I'm wondering is it possible to change the myvi 3SZ-VE ECU to rush/avanza ECU? myvi output 102hp@6000rpm, 136Nm@4400rpm. rush/avanza output 109hp@6000rpm, 141Nm@4000rpm. otherwise they share the common hardware interface.

This post has been edited by F-22: Jun 3 2012, 05:10 PM

forgot to report myself in. TS, help me to put me on the list.

Nickname: billy_overheat

Variant: Standard 07's Sxi

Transmission: Manual

Colour: Glittering Silver

Thanks TS!

thanks dude. r u using some sort of addon bracket or just the way it is? i'll try to put the elr like that.

---

Added on June 3, 2012, 7:48 pmmust remember also about the drivetrain

This post has been edited by Shah_15: Jun 3 2012, 07:49 PM

Alright.

I'm wondering if I leave the stains there, will it corrode/rust further? I'm planning to let the SC people do the job during my next service.

Hi guys, I have had my car for 1month+ and my windscreen and rear screen are starting to show water marks that cannot be wiped off. It looks as though there is a layer of film with many holes on it. When I run my fingernail on the marks, I could actually feel uneven surfaces. I wonder if you know what the problem is? No, my car is not tinted.. Cheers :/

I have that rattling sound too.. gonna fix it tomorrow together with my 2nd service..

Im not sure what material is the clipper but i do concern as the bonnet holder is indeed very hot every time i put it back after it came off...

Hi guys! I just bought a new MyVi 1.5 SE few days ago and i'm loving it!

Somehow i have a question to ask you guys, I hope it will not be bothersome.

I would like to ask how did you guys take care of the interactive touch panel daily?
Let say if we park our cars under sun and there will be a lot of heat, will it affect the touch panel to have 'purple patch' like those we have on monitors?

Is there any 'Cover' that we can buy in the market currently to cover up our interactive touch screen panel? I'm a bit worried as my tinting is not that strong and i'm parking my car outside daily at my workplace.

I'm using third party DVD and I've parked my car under the sun everyday. Seems OK though.

should be okay but if u insists, can try search for those screen protector for ipad/ tab and cut it accordingly. though i doubted it will give u any benefit under hot sun

err..i thought odo IS the mileage meter...lol

if yours is the extreme version..it has factory fitted tinted windows

i believe what he trying to say is the trip computer. well, for tinted windows, i got one free from SA and i can choose the level of darkness i want so that is more win for me.

Hi all, i found out where the sounds locate.

1. Front Passenger door, where two colours meet, Beige n dark grey. Its far left, 2wards da seatbelt direction.

2. Passenger seat, below i guess. When da seat is occupied, no sound. Tats how i found out. I thought it was da handbrake area in da 1st place.

3. Driver door, similiar to no.1. Its not obvious yet, but i think its comin.

4. Dashboard box or izzit called glove box? Minor rattling.

No sound from da seatbelt bhind though. Haha....

Hopefully sc is able to help me....ai....btw, my myvi is da latest 1.

If any1 havin da same prob, pls share ur experience. Cheersss!!

thanks for sharing. well luckily for me, i only hear the sound from the back. im gonna try to put the elr like megat showed in the pic. hope it will solve the proble and my myvi will be sound free. haha

btw, anybody know how to save radio station? and also can we watch dvd using thumbdrive?

Im having the same issue as you..so any fix for these? please share..
Any one reported this to Perodua service centre? The rattling sounds really annoyed me! btw, Im using Myvi Extreme

for this type of problems i usually DIY rather than letting other people touch my car, because they doesn't have sense of belonging and the SC people have lot of things to do. actually mine too got that rattling sound on the both door panels when driving on harsh roads, else it quite like conti car
for no 1 and no 3 problems, i observed (when sent car for tinting) there is a tightening screw behind the door panel handle, each on top and bottom, can be accessed by prying open the top handle cover, its the clip type, then you can see the screw underneath it. unscrew and you can take off the remaining handle and can see a hole which you can put your hand inside and pull the electrical connectors for power window and central lock motors. then it is safe to pry open the door panel from top to bottom all around is the clip type, don't do too harsh because you need to feel the resistance to check whether there is a clip at that point. once all had bare opened you can start working applying double sided foam or acrylic tape around the door panel and the door itself if you feel that metal is touching with the door panel producing that rattling sound. usually i put it on near the clip area. you can also put more cloth inside it too . once done, assemble back in reverse order. the annoying rattling sound gone, only tyre roars will be the only thing you hear.

for the glove box, simple, apply foam tape around. put cloth or non slip mat inside.

This post has been edited by F-22: Jun 4 2012, 09:10 AM