Here's my report of my ADSL
Line State Connected
Modulation ADSL_G.dmt
Annex Mode Annex A
Max Tx Power -38 dBm/Hz

Item Downstream Upstream Unit
SNR Margin 16 20 dB
Line Attenuation 37 20 dB
Data Rate 1536 512 kbps

Suppose my Streamyx is RM66 package,my download speed can reach 50kbps MAX.
currently im running on ADSL2+ (Multi-mode) modulation.(Selected from ADSL modulation page)
The modem im using is D-link Wireless DSDL2+ Router.(im connected to the router through cable not through wireless).

I've called TMnet customer service a couple of times but still everyday im facing uncountable times of disconnections.im wondering why. They ask me to connect the phone line direct to the modem. Yes, i did and without using any splitter.
However the problem still exists.
Since yesterday, my connection is worst than previous days. Suddenly i lost signal from the internet. I ping to tmnet. it was request time out. I login to my modem and check. The connection is still available. Ip address and everything is still there. i disconnect and connect again through modem but still i get no signal from internet.

I need some guides from you guys. What should i do on my internet connection.
Thanks in advance.

This post has been edited by AaronLooi: Apr 3 2009, 06:17 PM

Modem Status

Link Status Connected
Us Rate (Kbps) 384
Ds Rate (Kbps) 512
US Margin 20
DS Margin 4
Modulation MMODE
LOS Errors 0
DS Line Attenuation 57
US Line Attenuation 63
Path Mode Fast Path
DSL Statistics

Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

========================================
What bout mine ? Please comment

adrew. what package u subscribe?
your status too bad. DS margin very low.. and so do the line attenuation, very high.. means that both status are really BAD. ask tmnet/telekom to do something with your cable.

can someone comment on my modem status

Modem Status

Connection Status Connected
Us Rate (Kbps) 496
Ds Rate (Kbps) 2044
US Margin 7
DS Margin 8
Trained Modulation ADSL2Plus
LOS Errors 0
DS Line Attenuation 12
US Line Attenuation 5
Peak Cell Rate 1169 cells per sec
CRC Rx Fast 1
CRC Tx Fast 0
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
DSL Statistics

Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

ur line too bad .. DS margin u need at least 12db .. and the Attenuation need to be below 50 .. 13db = 1km .. more than 5km .. will facing intermittent and slow connection .. make a report

---

Added on April 10, 2009, 12:15 amSNR margin is to low .. and u not get the actual port speed ... u need to make a report .. if u area tampoi, jb .. i can solve it for u .. try checking ur internal wire .. free ur wire from alarm .. and unplug all ur parrel ..

This post has been edited by kek_ceklat: Apr 10 2009, 12:15 AM

DHCP Server:Enabled

Status:Connected

Connection Type:PPPoE

NAT: Enabled


Line State: Showtime

Modulation:G.DMT

Annex Mode:ANNEX_A



SNR Margin:DS=25.0 US18.0(db)

Line Attenuation:DS=50.5 US=27.5(db)

Data Rate: DS=1536 US=512(Kbps)

---

Added on April 10, 2009, 12:29 amhow mine?



This post has been edited by ejoylovers: Apr 10 2009, 12:29 AM

i think ur line is ok .. in the middle .. not too good and not too bad .. if im a tecnician to repair ur home .. i consider it ok ..

well now is new result..

SNR MARGIN:DS=29.5 US=22.0 (db)
Line Attenuation:DS=51.0 US=27.5(db)

how about it bro...waaa...

ok what .. ehe .. only ur home its to far from exchange .. i think u need to check ur cable quality ..

my snr
us:13
ds:29
attenuation
us:15
ds:33

is that ok....???
some times it dc....

what kind of dc? dsl light or browsing .. try use direct connection by disconnect all parrel include alarm if u use at ur home ..

Downstream Upstream
SNR Margin : 22.3 14.1 db
Line Attenuation : 15.0 9.7 db
Data Rate : 2048 507 kbps

is this ok guys?? i keep dc every 10-15min...
can surf but just keeps dc-ing
try other modems also the same...
not using spliter

shld i called tmnut?

im using streamyx 512kbps package.

How to I address to tmnet/telekom about my problem ? What should I tell them ?

Mine is really getting bad


This post has been edited by Avex: Apr 14 2009, 08:14 PM

Avex .. ur line is too bad .. SNR and attenuation both are too bad .. u need to make a report so tech can checking ur cable .. make a report intermittent ..

not to show off here but just wanna share. this is my current DSL status. got this after i changed the modulation mode from multimode to G.dmt.

DSL Status: Connected
DSL Modulation Mode: G.dmt
DSL Path Mode: Interleaved
Downstream Rate: 4096 kbps
Upstream Rate: 512 kbps
Downstream Margin: 31 db
Upstream Margin: 30 db
Downstream Line Attenuation: 0 db
Upstream Line Attenuation: 1.5 db
Downstream Transmit Power: 11 db
Upstream Transmit Power: 12 db

FYI I never face any disconnection before

This post has been edited by roy_pck: Apr 16 2009, 12:12 AM

Guys, what about my connection? Is it good or bad?

your SNR margin is ok-ok. but line attenuation is too high la. you may experience frequent disconnection.

Item Downstream Upstream Unit
SNR Margin 31 24 dB
Line Attenuation 17 15 dB
Data Rate 1024 512 kbps

how bout this??..is this ok??..

How about mine? Izzit good?

Modem Status

Link Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 2048
US Margin 24
DS Margin 31
Modulation MMODE
LOS Errors 0
DS Line Attenuation 5
US Line Attenuation 5
Path Mode Interleaved