Test drive my recently new built ground FPV project this week, K949 FPV truck with Turbo charged V8 again.

Video:
https://www.youtube.com/watch?v=yLFcOwkWD3M


This post has been edited by SupermotoXL: May 1 2018, 08:40 PM

I noticed the K949 have second servo. What it is for? Is it for diff lock/unlock? Also is the diff on K949 factory locked?

That's used for shifting the mid gear box from fast to high torque so i can switch back and fro between speeding on flat ground to crawling mode 2 way using channel 3 button. My rear axle is diff locked but the front axle not locked.

This post has been edited by SupermotoXL: May 4 2018, 06:46 AM

Just published review about ESS-ONE simulate engine sound unit at my website for those hardcore R/C scaler. Read all out here: https://www.supermotoxl.com/designs-a-creat...gine-sound-unit

Enjoy reading.

This post has been edited by SupermotoXL: May 4 2018, 10:04 PM

ESS-ONE sound engine unit installation on FPV 1:12 FY03 completed
Just like its big brother the 10428 and K949 teh next level of FPV realism also added to FY03, working on it yesterday to make it compact fit on the rear and caged frame.

Photos:















This post has been edited by SupermotoXL: May 7 2018, 06:51 AM

Trying to drive around my newly build 1:35 scale Ford F-150 ORLANDOO OH35P01 micro 4x4 truck to see how it perform over my diy rock crawling track. Its the old generation truck before the jeep released few year back.

My F-150 build gallery: https://www.supermotoxl.com/resources/galle...p01-4wd-crawler

Video:
https://www.youtube.com/watch?v=kJZ5h8zkq8k

Next driving my newly build 1:32 scale PAJERO, its the 3rd latest model from Orlandoo that share the same chassis design as the 2nd gen Jeep. Crawls good but has a long rear butt.

*Build details gallery for my 1:32 PAJERO: https://www.supermotoxl.com/resources/gallery/my-technologies-hobbies/ground-based-models/32-orlandoo-pajero-oh32a02-4wd-crawler


Video:
https://www.youtube.com/watch?v=JIpeysJTML4

Upgraded my old FPV FY03 off-roader with Bwaahh!! stu!!! tututu! Twin Turbo

Video:
https://www.youtube.com/watch?v=7EIH5qPJ_RM

Putting extra G-power on my FPV K949 rock racer at our park track.

Video:
https://www.youtube.com/watch?v=KwXOlmiud1I


This post has been edited by SupermotoXL: May 12 2018, 06:46 AM

Sharing my toughts and review on OH35P01 F150 after months of crawling and comparing with my others Olandoo inside this article here at this link:
https://www.supermotoxl.com/designs-a-creat...0-micro-crawler
Hope this info helps for all micro enthusiasts.

My next scale 4x4 fpv projects! This one sent by my fans who wants me to convert this to scale FPV cockpit driving tech. Currently its in bad shape...lets see how i could mods this crawler into awesome scaler with my magic.

Photos:

Hi, where is a good place in Klang valley to buy 7.2V NiMH battery sticks?

I don't live in klang but i bought my batteries on malaysia rc store here: https://www.mymegastation.com/collections/b...s---accessories
Used to bought Nimh but now lots of lipo for less charging and discharge hassle than Nimh.

Thanks!

I've return back with another review article on my latest build and some action on the 1:32 scale Orlandoo OH32A02 Pajero here at my blog page:
https://www.supermotoxl.com/designs-a-creat...o-micro-crawler
Enjoy reading.

I want to dispose puff batteries. I'm considering either salt water or discharge to 0V using my Imax B6 charger & then buried them in the soil (because I want it completely safe). What do you think? I have two puff batteries & one that doesn't want to hold any charge.

You can discharge it using charger else use discharge connecting to any light bulbs or electric motor before dump into bin. Here another of my best method, fun and definately safe to put into the bin after that if you dare. Here my video how to dispose it.

Video:
https://www.youtube.com/watch?v=-B_jQ7Ke5Iw

Yeah, I know using the nail. Maybe next time. I already dunk the batteries in the salt water yesterday. Maybe I'll poke with nail after to finish it off. I will definitely using a long wood with nail at one end to keep the lipo batteries at arm's length.

So hows yur battery after dunking, whats the voltage reading after a day passes?

There still little bubbles coming from the negative wires. Not much, but still there.