Fuiyoh.. All oso post new n nice casing.. T.T

lol..migrated from centurion5 to 690

centurion5


cm690


This post has been edited by jinaun: Jan 14 2008, 09:52 PM

nice casing, nice setup bro... CF somemore

i noticed 500w... can tahan ahh ?

cannnn.. no issues at all.. 500w psu is more than enough for such setup..

This post has been edited by jinaun: Jan 14 2008, 10:14 PM

my gigabyte psu reach 380w when playing cod4.
vcore: 1.52v
Gvcore: 1.54v stock at 1.33v

if i put in another 3870 with vmolt then i guess the figure will nearly reach 550w.

two panaflos are coming to replace the stupid stock cm fans.

urs different case lah... extreme users needs extreme psus.. lol

but for me.. its fine with 500w.. so far... lol

where got extreme...
check my signature ...

ok la.. i might be overstated...

i would put is as running over spec.. LOL

guys, i have problems with my cable management. does the PSU affect this?


This post has been edited by ericmaxman: Jan 15 2008, 07:21 PM

decided to put all the hardwares inside this small case - CoolerMaster Praetorian PAC-T01

already seems to be very packed...


motherboard tray slided in...


cables connected...


UVed...


cable management? damn... pretty hard only managed to a little hiding but most of the cables... like the 3rd picture...

i notice 4ram stick u using, what ram are they, how are 4 sticks OC? same as 2 sticks or worst?

they are patriot 2GB DDR2-800 sticks with heatspreaders

this sticks are default at 5-5-5-15 @ 1.8v and i've tested on 2 stick for 4-4-4-12 at 2.0V ... anything more is pushing my luck oledi

you can try hide all the wires beside the hdd drive rack to ur right side-panel...can help a bit

haha... thats actually where most cables are hidden in any cable management. Its possible to bend the sata cable and slip it under ur mobo tray as well. As for the PSU cable, route it to the back of the 5.25" bays then route them to appear on the bottom. If you really have the patient, you can remove the molex, slip the cable in through the HDD bays then put back the molex so that they can be well hidden there

sure can, but it's just for temporary use... my primary system currently down and HR-01 surely block the side panel due to it's height...

@sniper69

Time to get a new case loh bro ....

Forget about A10, grab something else that has true quality like PAC-T01 ...

u know who they are working for now right ..

notice anything...

...


UVed


i think that's the best i can do for now

@Doom
i must say that this CM PAC-T01 has better quality than my last A10a

That's something that can't be denied ... I had the same case as well ..

It was my very first Aluminum case and it's in my friend usage now ..

running as download station

I still think it's by far a better quality case compared to most Lian Li cases ..

Just lost a bit in term of internal design and modding ability .. .

But hey u proof there's light of future for this case with that BTX mod ..

u make me wanted so much to molest your case and get those wires sort out .. hahha .. hands getting itchy ...

Anyway those Pata HDDs cannot scrapped for SATA drive ????

It would looks much more better with an array of sata drives .

some minor improvement i did moment ago...

- removing all IDE HDDs, thus the IDE cable too
- tie some of cables to chassis with cable ties/wires
- also rerouting cable for better view
- there's more to be done but i think should be ok for now

wah old skool casing in action, it has been a while not seeing these kind of case........ sniper69, very nice indeed........

HR-01 so tall meh ?? blocking the side panel ??

Doom, u ask him to replace the hdd ? hehe i think he kept a lot of goodies in side like sniper on the roof (the founder of this clan?), hard to replace.........

btw just asking, let say u want to light up the 3870, what is best way of doing it ?? attaching LED, put a ccfl behind ? any idea........

after see sniper69 3870 light up by (mobo led izzit ?), hands itchy to get mine light up as well, i notice that the card cooler has much empty space within