me thinks he's asking about the 0540 Opties

waiting for 2 news PSU to arrive here..

Hipro and Sansun..

as i said earlier..

@ 1.45v @ stock cooler

300 x 10 using clockgen == comp restart

Sansun...

Erm, any idea to increase the Vcore?

This post has been edited by tAmp0i: Dec 16 2005, 06:25 PM

i m not using stock cooler ler...using si-120 like my sig say

eh kiljim in amd64tweaker 2T timing = disable is 1T rite???

1.45 x 110% = 1.595 and 1.525 x 104% = 1.586.... which one shd i use ar????? i mean which one will produce more heat and which one not? sorry ar guys...i m a n00b here >.<"

This post has been edited by sup3rfly: Dec 16 2005, 06:31 PM

yupp, enabled will be 2T

miahahaha.... got 2.5gig superpi32M stabile with my opty170... what a relief.. dont want to push harder as it's 0541.. thats enuff.. thanks dinster...

-opty170@2.5gig@1.45v
-biostarNF4U-A9(flashed latest bios) -mobo paling murah..
-XP120 with 12cm fan with table fan at full speed..
-2GB DDR333 Infineon Value Ram
-GTO2 16pipes stock speed

aarrghh.. tak sempat nak pos ape2.. my rig doesnt connect with internet n i'll go to trg tonite.. then straight to penang...
will try prime95 later.. but as long i can do my work then it should be fine..

*-credit to my fren.. he did this.. i just watch...

This post has been edited by baok: Dec 16 2005, 07:14 PM

hope u can pass prime as well

I will try to prime 32m @ 3ghz when I'm free to format a new window with my new DFI UT LP Ultra D. Now lazy to test my new board. -.-

Can anyone explain in a easy way what is

AMD FX

AMD X2

AMD OPTERON

I mean the speed and price factor which is better overclocking ..

just passed prime at 2.8ghz...1.45x110%...primed for 8 1/2 hrs, then stopped - went to work. damn temp is too high - even reached 56c at load...room got no air cond one can only prime at nite

wah 56 is high ar??? i m at 55 ler..... i tot its average...
eh can u guys tell me which program is good to burn in proc ar???? and ram as well....

This post has been edited by sup3rfly: Dec 16 2005, 09:30 PM

Prime Large FFT

CPU Burn-in.... Disable error checking for maximum heatload, try default Vcore at 2.90GHz and see if there's any chance of going higher after that

default vcore i only can go til 2.8 wo....>.<
shd i burn in at 3.0 @ 1.45v x 110% or burn in at default vcore 2.8?
and kiawee thx for the suggestion


This post has been edited by sup3rfly: Dec 16 2005, 09:46 PM

Hmm, you should burn it at the speed where your processor is not running stable. Maybe 2.90GHz, 1.425v let's say? I'll try it out too since our stepping is similar

well if default voltage i cant get to 2.9...will get blue screen so i m running at defualt vcore and 2.85
if i m not forgotten 2.85 failed prime...

hey guys, recently when i run my prime RAM stress test, it fails in half an hour..

how to solve this arh?

both my CPU's can run prime for hours, but my RAMS cant.
btw, my rams are CORSAIR XMS4404v1.1 4400C25PT PC4400

what is ur max passed memtest?izzit the same speed u running wif the prime ram stress test?

i did not try memtest but this could pass my Super PI
im sorry but im very noob when it comes to this.
yeah i guess this is the same one [10 X 250]
i will try memtest afterwards.