Crucial ballistix micron 5b g. Got people reach 265 1:1 at 2.8V. On my jetway even 3mhz increase already can't boot. Can tell me which ram you use? Maybe want to change.

hahaa.. wat if u try use divider. sure can get above 3Ghz

Already tried... cannot ... max is 3080... 5 minutes.... restart... already at 1.6v.....

wow~! that's some mad oc with very low voltage u got there!

walaweiii.. only 1.45v only can reac 3.1 Ghz

wahhh good...

This post has been edited by anggajaya: Jun 6 2006, 08:52 AM

hehehe...came across in the bulk thread or somewhere in lyn
that blend test ka...i've no prob on cpu stress test...no problem on memtest86+...ran the blend test...failed within minutes...dont know why la...

Blend test fail means got ram problem. Just that other programs havent run into it yet. Just a matter of luck when it will happen

even wif divider?? how bout try lowering ur cpu multi to 9 & play wif the HTT

actually which 146 doing better? the 0604 or 0607 ?

Now, i just test the 0607. The 0604 havent touch it yet. .. btw, gsan, what is ut TDP and TMaxCase? Mine is

TDP : 38.2w
TMaxCase : 55c
Core : San Diego

I wonder if these values give any meaning.

yes it does bro...
higher TMaxCase, u will have a better chance of oc higher. normally higher TMaxCase will have higher TDP. 55c is same as mine (mine is 144 cab2e 0610gpaw), moderate oc stuff i must say but still ok

that what i have been asking around months back.
if u could pass memtest86+ for 24hrs or more and then ran blend test but failed. what does it means? does it means u have waste ur 24hrs of time and electricity bill
what can be derive is that - using memtest86+: to know how high can u oc ur ram stable with purely (almost) memtest86+ own the process.
sp2004(blend test) - system (windows) stablity at the fsb u clocked ur ram where the process is not purely own by sp2004 since there are other background process running. so, if u want to run blend test u have 2 options:
1. run it with minimal process running in the background; or
2. run it at normal environment as u normally use ur pc for.

#1: is good for emmmm...not sure for what la actually;
#2: is good since if u passed the blend test, u can be comfortable to say that ur system (minus the gfx) is stable.

hurmm
so is tat mean if the TMaxCase at 65~75 were better??

bro, it means that the proc has the PROBABILITY to oc higher...u know la Probability Theory, sama as what Forest Gump said, "Life is like a box of chocolate, you'll never know what you gonna get".
but u might have a pretty good chance la...other factors count as well

hahaa.. well, basically i do believe in theoretically b4 doin' it practically.
if onli my temp wont go higher, sure i will push my opty to the max

This post has been edited by gengstapo: Jun 6 2006, 06:08 PM

blend test is easier to pass compared to runnin small fft & large fft simultaneously. i'm havin hard time to have my system, especially ram (large fft) to prime stable...

well, my OC'ed rig never passed any test when runnin' any cpu-stress programes. i just run pi calculation 32mb & some other(pcmark, aquamark etc) to test stability

soory noob here...just wanna ask..which opty is worth 2 buy? 144 or 146?
coz the differences of price between them is nearly rm200

almost same onli. the diff onli multi. depend on ur budget

This post has been edited by gengstapo: Jun 9 2006, 06:40 AM