Read here on why FF do not need spoilers

For me it makes sense on the less grip and more grip thing for better acceleration..if FF use spoiler the drag is at behind when air passes the spoiler thus the front is not getting any grip so poorer acceleration but if FR the drag will create more grip and better acceleration when the air passes the spoiler...

Plus Wira is FF and without performance mods with spoiler you are getting less acceleration thus higher FC...it's pure Ah Beng....ya sure your car will stick to the ground more and top speed is bad which has been mention so when you want to reach top speed more....you perah more minyak just to get it....FC out la

Integra and FD2 is front wheel drive and have default spoiler but at least they have the engine which overcome poor acceleration......plus they need the air pressure to keep the car on the road....which prevents the car from flying all over the place thus that default spoiler is not for show

Civic Type R (FD2) is 200 + HP on stock compare to a Wira stock is a world of difference...

Change block to 1.5, then find Waja crankshaft and piston, car become monster adi..

Guess Wira 1.3 & 1.5 front same spring, nvr heard got different spring for these 2 models.

Wira 1.6 rear is same with Waja, but different hardness. Last time I used Waja rear spring, very hard and high ..

At least Wira 1.6 got half of Type-R HP.

On normal passenger car I do think it is just for aesthetic purpose. But if done correctly it does look nice.

I'm driving wira 1.3 a/b...going to change my spring and abs soon...is it better to use stock front spring + waja/wira1.6 rear spring or front + rear waja/wira 1.6 rear?...

i want my ride to be little higher...as previous owner use lowered spring if not mistaken...will hit the front hook whenever i'm going down from mall parking lot...

1.6 is half and 1.8 is 65% of FD2...still a big gap lehhhh in HP

Want to look nice and ganas and have money to spend on it..anyone can put spoiler but still i rather save the money and do the engine first rather than look nice and fork out more money on fuel...

Anyway, i like Wira with a smooth streamline without spoiler, lowered and have a simple lip, skirting and rear lip on it....

Couple with a MIVEC engine....confirm simple and yet powerful sleeper Wira..intend to do this...

Wira sedan without spoiler feels like male chicken without the ekor leh.

Something small and nice will fit perfectly on the sedan bonnet IMO, but I myself haven't found any spoiler that I like.

Want ekor? Than take the Wira A/B ori spoiler and put at sedan laaaa....not that small la and confirm fit one lorrr....

I seen A/B spoiler on sedan, it does look nice but still not my cup of tea..

I like Neo CPS spoiler, but to put on Wira sedan kinda absurd..

wow...
means my current 1.5 wira...
change waja crankshaft and piston...
can up alot power...?
btw...
how much for both item + workmanship ar...?

Waja parts IINM is about 1k, need to take out the block and rebore it, expect 1k on there. You'll need piggyback like e-manage + dyno tuning, about 1.5k.

HP maybe can get around 110.

i didnt change the block, just bore it, cuz my foreman said that doesnt need to change it, the 1.3 can bore up to 3times max, so i did only 1 time...btw, mine is carb.love the carb response.
bearing, belting,and most of the thingy for general overhaul, replace all 4 absorbers, clutch changed to waja 1.6, costs 2.8k..... and did some engineering= balancing to my rims also, since the block sent to engineering, i decided to sent my rims also....its genuine sparco, i guess its better for me to repair it than buy vip imitation rims , looks maybe good but handling sux.

for the doortrim and switch, rm50 each door. power window motor set,rm50-rm90 each door, i forgot...more n less la.hehe...then covered with leather super leather rm300 overall.

next thing im gonna do, mivec front bodyparts, rm700, skirting and rear bumper fibre duno yet. paint job 3.3k including interior and rims.its pearl 1 star...some say its kinda expensive,but judging by my past experience, sending to cheapest paint job, but not satisfied, better sent it to expensive one and satisfied. if got more money, mayb i wanna change the headlamps and taillamps too.....IF i got extra money.hehe.seats also i havent check....haih...too many things need to do...hopefully this project will grant satisfaction....

Well you had your point...while other have other point as well...is all back to the driver and the feeling on the road...there's no right or wrong...is all about personal view

you can replace all spring to stock 1.3/1.5 spring, will give you the normal height ride back.
or if you want a bit more stiffness, then can use 1.6 spring.

This post has been edited by xxboxx: Dec 30 2011, 09:21 AM

In that case, my Wira is ah beng with Evo X spoiler, running in 4G15

wow..
gaining to 110 hp nid around Rm3.5+-...
den i'll skip dat den...

Yes yes. But this gt wing needs to install properly. Or else, like mine, the mounting hole got tear backwards because of the wind force coming front front. Anyway, I sold it off for mugen style spoiler jor n close back those extra holes made by the wing.

performance mods not cheap. especially NA car..

eh bro nelson...i aso got the similar idea as yours...haha.. .but if u putting led on door handle the wiring macam mana?? this one i really blur liao...haha

got one more idea is putting led below the side mirror..like rx8...but only light up when u open up your door..hehe...

but then i ask one of the seller in automotive garage selling led he said can..but not so easy..haha...cause you nid to pull the wire from 2 side mirror and connect to the room lamp...wow...

No money no gain... haha...

Just in case anybody looking for stock hood, rear bumper and twin tip exhaust.

http://forum.lowyat.net/topic/2170384