Er, you can select on your default dashboard.
That means, you do that via plug in and select from the dashboard.
Which modem are you using?

I am currently testing a huawei UMG1831
Okay, I try and see how to configure using dashboard.
I already forced the modem to be on UMTS2100 via MDMA.

But my office the 3G signal is weak so I can't test it out. Need to wait for tonight.

The UMG1831 signal reception is very weak, at my parents place cannot latch onto any 3G signal, and if can it's only 3%

---

Added on January 17, 2012, 8:43 amOkay, the modem is already on RAS, since yesterday, but even then last night when I was testing the reception was terrible.

And it kept disconnecting and the upload was only 500kb.

Yesterday I didn't force the bands, but today I have. I can't test it for very long because different location

Tonight will test again.

---

Added on January 22, 2012, 5:48 pmI am experiencing some odd things with the router.
I am not sure if it's the channel width being the issue.

The router is currently set @
Channel 1
mix mode
auto channel width
300mbps transmission

For my own devices, SGS2 and my mom's laptop the wifi does not 'hang'.

But for ipad 1 and ipad 2, even though it shows connected, the wifi is 'stuck' and not seem to be transmitting.

When this happens, other devices that are connected can still work without issues.
Any one experiencing it? and if you did and managed to solve it, any setting change?

This post has been edited by MYstombox: Jan 22 2012, 05:48 PM

purchased my 3420 from cycom for 85

mr3420 + e1762

modem ready to connect for about 4min.getting 45% signal strength only.
at times the e1762 will disconnected after 30 minutes or 1 hour usage. take times to reconnect back, at times need to power off router.

how to settle this issue ya?

Does this modem support u-mobile M68 plan modem?

ya, does anyone know if the new modem ZTE MF190 (the one umobile use for MB68) works?

mf190 works

ss_izal, sometimes mine disconnects as well.
Maybe its due to weak signal.

I'll try placing the modem in another place over the weekend.

have u try other channel ? like channel 11 ?

---

Added on January 26, 2012, 5:24 pmwell, mine router with E1762 + maxis DC 3~15 times per day,. i guess nothing wrong with my device because when i put celcom sim in the set,. it didnt dc at al running for 65hour +++ continuely. i think this somehow is the signal tower issue,. either the tower is overpack or some technic issue ,.

---

Added on January 26, 2012, 5:25 pmfor ZTE MF190 it works, of course, u just need to turn off the autorun first, then router can recognize it and works well after.

This post has been edited by chuahcs79: Jan 26 2012, 05:25 PM

chuah, wifi wise I don't have disconnection problem.
Anyway I solved that issue.

Now the issue is that the modem will disconnect itself after some time, maybe its the cell tower. But it happens at 2 different sites.

mine router using maxis also happen the same, disconnect itself 3~15 times per day,. even on 900 or 2100 tower,..

but when i use digi, celcom or u mobile, it stay connected as long as 40~65 hour without DC,.

i suspect is signal tower problems issue,..

@chuah, the ipad doesn't seem to play nice with hidden SSID. I changed to non-hidden SSID and now its okay. Sigh. But it worked okay when I was using the TPlink ADSL router with hidden SSID. With the MR3420 got problem.

And its not the channel, because on channel 1 there is no interference in my area. Anyway I went other ways to configure the router to prevent unauthorised access.

Yes, on 2 sites, maxis disconnects a few times a day. At one site the reception is ~67% (e173), another it's 45% (Icon505).

When connected, no issues with speed,ping etc. But intermittent disconnections causing video streaming problems. It's been happening since I first deployed the icon 505.

u need to call maxis and file a complain get a complain case number, and make sure they follow through and check the signal tower in ur area,.. ia m sure is signal tower problems,.

if is not, why celcom digi and u mobile was perfectly fine with the same combination ?

The problem is I got 2 location and also face this issue.

And they are like 12km apart, totally different area.

chuah, did u make a complain on this case?
I'll do it over the weekend.

Guys , can i do bridging with this router, eg i need to connect to my neighbours router so we can share the internet and network. can the data transfer reach upto 200mbit ?

can some 1 guide me on how to setup with this WDS ?

Have you read the manual? Inside should write.

---

Added on January 28, 2012, 4:21 pmYou can download from TPlink website.
Reach 200mbits, maybe, totally depends on the signal strength.

---

Added on January 28, 2012, 11:13 pmActually how far is your neighbour?
Maybe just run a long RJ45 cable is better :S

I set up WDS using tplink routers before, cannot do WPA security. Not sure about now though. It was only WEP.

This post has been edited by MYstombox: Jan 28 2012, 11:13 PM

trying to use MR3420 with Omnia II i8000 as a USB CDMA modem. anyone know how to do it?

I connect the phone to the router and it said unknown modem, I did tried using USB-Phone and USB-PDA, both don't work.

limcc, u can ask chuah how he gets nokias to work with the mr3420, maybe its similar.

What the difference between Aztech HW550 and this?
@ chuah TS
I include ur thread in my thread
http://forum.lowyat.net/index.php?showtopi...post&p=44010532

---

Added on January 30, 2012, 10:57 amBoth same price
Can this support HSPA+ modem?

This post has been edited by wkkm007: Jan 30 2012, 10:57 AM

depends on the modem, it can support most huawei modems.
Can support icon505 as well.

I mean the 21,42 Mbps 1...

Do you have the modem right now?
Why don't u contact someone in the forum, see if u can meet up and test the modem.

I can't really tell you for sure if the HSPA+ modem can be detected and recognised.