Direct cheaper. Pay now 3 hrs go the office collect if got ready stock

pm me number 100% Legit

Direct whatsapp cheaper? or same as shopee & lazada

Cheaper a bit.

pm me number 100% Legit

pm me number 100% Legit

i had pm you but you noting reply back me
daam no help i unable to purchase i am very sad

i want call but i really need phone number from Sublime
i need whatsapp number Sublime
i did pm you but you no reply and no give phone number that mean i unable to call and whatsapp because no details phone number and whatsapp number

+60 16-305 0261 Sublime Zhek

This post has been edited by tj01: Apr 8 2023, 07:55 AM

to save space, you can try using custom dns from adguard or nextdns. can configure a bit like what to block, allowed app, etc

Can run Adguard Home as a RouterOS container. I do this on my hAP ax3 which also runs uptime-kuma. Zerotier is already part of RouterOS. This runs on my main RB5009 router.

Aiyo, cannot google meh? Busy lah.

This post has been edited by soonwai: Apr 8 2023, 09:35 PM

didnt try to put anything in any mikrotik i encounter yet. maybe will learn about this later.

previously at home i'm using rb750gr3 and nextdns. set the given dns on dhcp and the dynamic ip address at nextdns control panel.

now changed to mikrotik + raspberry pi (adguard open source & file storage)

i already did google here link https://www.google.com/search?hl=en-MY&sour...230.Uv-4JeWiUN4

where to find ???? maybe wrong search ???

It's Sublime, not Subline.

https://www.facebook.com/SublimeTelecomSdnBhd/

On my computer, 5th result, the Facebook one. Click and the same number given above appears.

ok thanks found out 5 the facebook

thank you

Got rid of the Deco x20s and got the hAP ax3. Just one unit for now. Will probably get another next month. Or maybe cAP ax.

As usual, router is RB5009. Unifi 800. x20s replaced with the new ax3 and old hAP ac. Both APs are wired.

Actually the Deco x20s have been working well and stable other than:
• No way to specify a device to connect to a certain node.
• No way to adjust the transmit power of 2.4Ghz or 5Ghz on the Decos.
• 2.4Ghz are set to 40Mhz channel width. Cannot change this to 20Mhz.

Notes: (on 7.9rc2)
- Currently running 7.9rc2 because I wanted to see if it fixes the docker pull error. No, it doesn't.
- Still have errors pulling newer containers from docker hub. (eg: Adguard Home)
- Switch chip no hardware offloading yet.
- ax3 wifi died after 3 days. So far happened once. (key handshake timeout for all devices) Needed to reboot. Unsure if this happens in 7.8.
+ Speeds around the same as x20.
+ Range better than the x20
= Can't test roaming yet since I only have one unit.
+ Capsman works but not compatible with each other. So, in mixed wireless and wifiwave2 environments, you'll need 2 controllers.
- Wifiwave2 Capsman no forwarding yet, only local.
- Wifi reg table only shows link speed. No longer shows width & chains.
+ Container support is great. Currently running Adguard Home and uptime-kuma on the ax3.
+ If plan to run containers, probably better to get ax3 or cAP ax instead of ax2 bcos of USB port.

Speedtests below. Ookla Speedtest to Singtel. Unifi is 800/200. Have not tested wifi ax to LAN.


iPhone 13 Pro 2x2 80Mhz 802.11ax (Link: 1200 Mbps)


iPhone 6s 2x2 80Mhz 802.11ac (Link: 866 Mbps)


iPhone 6 Plus 1x1 80Mhz 802.11ac (Link: 433 Mbps)


Mac mini M1 2x2 80Mhz 802.11ax (Link: 866 Mbps) Seems a bit slow.


12400F MSI B660M Windows 11 PC with Intel AX201 2x2 80Mhz 802.11ax (Link: 866 Mbps) Dunno why PC upload speed is always this slow.

For comparison:
Deco x20 tests: https://forum.lowyat.net/index.php?showtopi...ost&p=105043089
Deco HC4 test: https://forum.lowyat.net/index.php?showtopi...ost&p=105783956
Deco M4 and M9 Plus: https://forum.lowyat.net/index.php?showtopi...post&p=96378294

This post has been edited by soonwai: Apr 11 2023, 10:08 PM

Best is to update then reset before using it.

Ya, I reset-config no-defaults then configure from there. The config is minimal, just 1 bridge and ports and the wifi. And the containers. First tried 7.8 then 7.9rc2 when encountered the docker pull problem.

Thinking to replace Ubiquity Unifi and try Wifi 6 with Mikrotik. When you going to get 2nd unit to try roaming?

btw, how much is the hAP ax3?

This post has been edited by cyberic: Apr 12 2023, 02:51 PM

ax3 is RM685. Bank vouchers will help with this.
https://s.lazada.com.my/s.5UAgb
A bit cheaper if buy direct.

Generally speaking I wouldn’t buy Mikrotik just for its WiFi. It’s always underperforming.

This post has been edited by soonwai: Apr 12 2023, 03:19 PM