kinzu and merc stealth? but I think no more in production alr..get those cheapo logitech.

---

Added on February 11, 2012, 4:09 pmnot surprised if the frost blue edition is more expensive than the D3 one.

This post has been edited by TechnoG: Feb 11 2012, 04:09 PM

for the cybercafes use g1 logitech.

Its actually really good. Light, nice shape and sensor is pretty good too. Plus its cheap.

@song
Recommend the kinzu for cybercafe use
As for keyboard.. The best one would be the 6gv2. But its costly

guys i'm having a problem. my sensei cursor keeps getting stuck. my sensor died once and they RMA it and now this problem happens. should i send it back?

did they send back the same mouse?
or diff? else u must be quite unlucky, or sensei quality no good...

Bro please show your mouse setting
It might be due to your setting

I think they sent me a new one, but the minute i plugged it into the pc, my settings were in it so I'm not sure. It was a sealed box. Also I noticed that the bottom of the mouse had a few wear marks so I'm really not sure. The shop told me they replaced it.


Here's my settings:


It happens sometimes but yesterday it was crazy. I had a mini lan party at my place so i moved my desktop into the hall. The cursor suddenly gets stuck when I was playing LoL, so I tried to rapidly move it around to sort of unstick it. Then it'll be fine for a while before it happens again. I read somewhere that the SS engine could be causing it because of the profile switching but I didn't switch any profiles. So I manually stopped the SS engine to see if the problem stops. It didn't.

Please note that my mouse is always on contact with the table/mousepad so its not an issue of lifting the mouse (sensor not detecting surface).

This post has been edited by DemonTweakZ: Feb 12 2012, 06:30 PM

everything looks fine, except your uber high lift off distance. doesn't look like anything is wrong with it..try go claim for RMA again?
I think they didn't not replaced your mice cos Sensei do comes with onboard memory right? so all your settings will be saved in there. but then also prolly your settings were actually the stock settings?

This post has been edited by TechnoG: Feb 12 2012, 06:37 PM

u dont check the serial numbers?
but usually, in cases of quick RMA, they do not send a new mouse.
they will send a mouse belonging to someone else that has previously been repaired, then when the mouse u sent it gets repaired...it'll get sent to the next person who RMA's theirs.

My settings are not the stock ones. I changed a few things to suit me.
I use a uber high lift off distance because of this problem. I thought it was me lifting the mouse too high from the surface. But it seems thats not the case.


I didnt keep the old serial number la. maybe in the old receipt. Looks like I will resend back and ask for a replacement. I don't want someone elses RMA'ed mouse.

Note: It happens on other profiles as well. So I don't think its the settings.

I was wondering if other Sensei owners are having this problem as well. This is terrible for a RM400 mouse. Wonder if they can let me swap it for a Kana.

seriously doubt they're going to let u swap, and refund the difference somemore.
plus it's better to go for xai rather than kana.

hmm have you tried experimenting different lift distance?
try to do it
if problem still persistt recommend u go for RMA anyway
What pad u using?

xai? hmmm... nevermind, its too early to think of alternatives. I figured they won't let me swap. Just need to know my options in case my sensei dies on me AGAIN.


I can't really notice the difference in lift distances. Maybe I'm not sensitive.
I'm using a QCK.

I'll bring it to the shop tomorrow and see how. Damn it. It will be the second time I'm sending it. My main issue is trying to replicate the problem for them to see and as of now, I don't know what triggers it.

why would it be more expensive than D3 one???

Have you update ur firmware and reinstall ur SteelSeries engine? It happens to me once when i bought it and i reset the settings when im at cafe , when i plug back at home , it has some error occur, maybe u could try to uninstall the current SteelSeries Engine, then re-download the latest firmware. Should be working tho.

Ok I'll go back and try that.
Currently I'm using it in office with my laptop and there's no problem at all. I don't have the SS Engine installed on my laptop tho.

Some forums mention that cloth pads on high DPI can cause tracking issues. Could it be because of dust trapped in the sensor? I'm using it on a table now and there is no problem.
I just need to figure out a way to replicate the problem consistently for it to be considered an issue. If it's a random occurrence, I doubt if i can RMA mine.

This post has been edited by DemonTweakZ: Feb 13 2012, 02:56 PM

Yeah then probably is ur SteelSeries engine problem , For mine i have re-install it everything works fine after all. If you can use it at ur office without SteelSeries Engine , it means have nothing to do with your sensor.

Me myself using QCK+ Tyloo, and also Zowie mousepad before this, i've no problem tho, dust does't effect that much except ur mousepad is kind of dirt on it .


By the way , remember when u uninstall your driver , do remove the old settings , else will be saved in your PC and when you re-install the new driver ,it will run your same settings. try re-install everything and reset your settings.

This post has been edited by FukaDa: Feb 13 2012, 03:08 PM

Can i save it to my mouse and then re-install everything? I can manually set the settings if required but I'm just wondering if this is possible.

i dont use Steelseries Engine for my previous Sensei and current Xai. I use manual settings (via mouse adjust). I just dont like the Engine. Too many problems.

my xai mouse scroll button spoilt.. can click but cannot scroll.. the scroll now very loose, seems like something inside broken...