Just for the voltmeter function.

I like it mah

1)Under the dashboard (Place that u play with your break and acceleration)

2)Under the seat


All this LED DIY-Able
What you need just the circuit board, led, and the pattery stuff (during secondary Kemahiran Hidup we got use 1) and other equipment you need to fit to plug and play~

---

Added on September 25, 2011, 2:29 pmSo we can notice our battery running low power, is dat so?

This post has been edited by stanleypua: Sep 25 2011, 02:29 PM

Congrats, Bro!

Besides Voltmeter function, did yu connect the delay timer so engine not switched off till rad fan cuts off/water temp down?

---

Added on September 25, 2011, 2:35 pmSorry...juz posted similar ques....
Mayb occupy less space & also <$$$ if get digital voltmeter alone?

This post has been edited by zeone: Sep 25 2011, 02:37 PM

Yeah. Have to keep an eye on that,

Timer a bit more complicated, because our cars got immobilizer feature. That will mess with the timer. Have to bypass to immobilizer then can. That being said, however, I dont foresee that being done.

will really show up everybody in car liao!!

I had one 6 white LED direct "plug n play" replacement cabin lamp in ole ride. 2 LEDs KOed oledi. Kenot find similar now.

This post has been edited by zeone: Sep 25 2011, 02:46 PM

yours also will look whitish purple like at my thread , the crv plate numberm the persona boot light u posted

---

Added on September 25, 2011, 2:45 pm use led stripe to mod into the cabin light, cheap yet lasting

This post has been edited by Sh@rty 5: Sep 25 2011, 02:45 PM

TQ, Bro, for suggestions!
Will see if my DIY skill is up2par or not 2do so...when me get the stripe fr yu lo. "Kill 2 birds with 1 stone" thingey?
Will update then.

This post has been edited by zeone: Sep 25 2011, 02:54 PM

Anyone knows where can get car regn no. sand-blasted onto windscreen?

This post has been edited by lowyatsuperman: Sep 25 2011, 02:56 PM

Ask yr salesperson...he/she shld hv contacts. Or mayb Acc Shops?
Such sandblasting not pop'ar nowadays...

Btw think Sagas oledi got chassis Nos. etched into front & rear windscreens.

This post has been edited by zeone: Sep 25 2011, 03:00 PM

some inspiration for you

p.s will include another connector for ur room light, since i gotta open shop later to take some stuff

i think sh@rty 5 have it

actually i got another nice item for all blm owners, also plug and play but..............................................

Hmmm.. I don't really care the warranty, since heat rejecting is more important to me.
Don't reali wana make myself suffer with the lousy film for few months or even few years, hahaha
Since the tinted film I'm going to go for will be provided with warranty oso wat. Hehehe
And i have confidence to my fren, have find him for tinting for many times dy.
Nvr gt problem til need to claim warranty

---

Added on September 25, 2011, 3:03 pmBut i worry bout the Safetint gt problem like bubble or dust,
Den i GG.com cz both tinted film can't claim warranty dy,
Even Safetint can claim, the better film that i applied on 2nd layer sure gone, GG.com

Before this i oso thinking to tint 2 layers,
Cz remove the film very troublesome and need to waste money, hahaha

---

Added on September 25, 2011, 3:04 pmHi bro shorty, I'm the one who pm-ed u last night.
Wil buy the OEM ABL from you afterwards cz the budget is out of my expectation currently



This post has been edited by LittleMin: Sep 25 2011, 03:04 PM

Tks a meg, Bro!!
Now me juz kenot wait 2get them!! Yayyyy...!!!:hyper:

Re other PnP BLM item, mayb via PM?

---

Added on September 25, 2011, 3:16 pmRe OEM ABL, this module really is "Godsend" esp for Saga ladies! Pulling & pressing that slim hard 2grip knob to lock/unlock doors is NO joke 4ladies esp!

My other half was so happy I cld find & install it! Most in market are "Universal" types...a lot of connections to do wan.

Anyway, yr call...


This post has been edited by zeone: Sep 25 2011, 03:16 PM

http://www.theophiluschin.com/?p=3490

Flx Hatchback

You're not alone, bro.





When turning the wheel and/or going over bumps won't sekat meh?

Mine same as you, bubble start from demister line...starting bubble after 1.5 years car...

From pic all yr bubbles are located where the rear demister element lines are!

My guess? Cld yu hv tested yr rear demister quite soon after delivery of car?

Rber reading somewhere abt not doing so until after a longer period of time...much much longer than for other windows!

This post has been edited by zeone: Sep 25 2011, 05:33 PM

yup, no joke, reli usefull especially for female drivers, who have the habit of putting their handbag on the passenger seat when they drive

actually i posted the other plug and play item before

only suitable for first batch of blm, not for saga fl, cause its actually a one touch switch, where when u wind down your window, just press once and it will come down automatically

My car is almost 1.5 years as well.

Nope. I kept everything shut for 2 weeks after I received the car.

Well it's not urgent, so I'm gonna take my time to get this solved. Gives me more time to save up some money in case this is no warrantied. lol.

After 1.5 yrs...?
Like dat, then cld b due2 poorer adhesive quality of tint film and/or poor workmanship liao.

The 3M film on ole ride lasted >8 yrs b4 bubbles appeared. However, mayb becoz seldom use rear demister lo.

@+Newbie+ : Sorry, din kno yrs also almost 1.5 yrs liao...juz read yr latest post la.
So my 1 sen's worth comments above also may apply.

This post has been edited by zeone: Sep 25 2011, 05:44 PM

No wor