Hope everyone can understand this tutorial. I try to explain as simple as possible.

I divide into 2 parts. Part 1 is installation of Boot Lamp Cover. Part 2 is getting the correct wiring for the boot.

Things you need to get ready to have OEM Honda Insight boot light

1) boot lamp cover Part number 34265-SFE-003.  Another cheaper version part number 34261-S5A-003
2) wiring 5 meter
3) cable ties
4) led bulb ( T10 version )
5) Pen knife
6) Scissor & Black tape
7) Wire coupler (optional)

Difficulty : 3 out of 5
Time spent : 5-6 hours.

Part One : Installing Boot Lamp Cover

Step 1 : Open the boot and locate the plastic cover on left side. Use a flat screwdriver cover with cloth to pry out the plastic cover on the top left corner. There is hole for the purpose to remove the plastic cover.

Step 2 : Check the cover and turn opposite way and see there is a shape which you can create the hole. I use a dremel to drill the hole then sand paper to smooth the edge.

Step 3 : Get the boot lamp cover to match with the plastic cover to ensure it fit properly. 


Part Two : Finding The wiring

Step 1 : Get the negative source -> boot lamp source wire. Open the boot and slowly peel out the black protective rubber on right side. Locate Orange Wire.  Try use wire coupler or expose the orange wire with a new wire to connect our boot lamp. You need around 4 meter. Please do not cut the wire.

Step 2 : Once wire is connected, tidy the wire to the boot lamp location on left side.

Step 3 : You need to dismantle the boot cover, spare tyre, the accessories on the bottom section. Slowly peel the plastic cover one by one .


Step 4 : Locate the positive wire ( Pink color ). Just like step 1, get another wire ( 1 meter ) to link with the positive wire.


Step 5 : plug the wire and connect with the boot lamp. To make it simple, put the pink color on top and orange color on the bottom. Later you shall know which is Positive and which is negative.

Step 6 : Take the boot lamp plastic and connect it with LED light

Step 7 : Test with the LED and the wire connection.

Step 8 : If everything is alrite, assemble back the boot compartment and the boot light is completed.

Any idea when the newly design Honda City will be out in the market?  Any rumors?

for sure they are going to bring in the facelift version for insight, only for 1.3L

Don't think it's the FL version, price probably will increase 1-2k just like previous increment after tsunami. This is wat SA told me.

whats the current offer for insight? anyone knows?

How much for side step shorty

Can anyone help me to do my boot lamp wiring with a fee?

Am noob in DIY ....

same here, i'm willing to pay if anyone offer to help for wiring like babysmile

join TT with babysmile lah.. haha

RM99.8k with 1.5k rebate or more but some area is already sold out (that's for year 2011).

Hope everyone can understand this tutorial. I try to explain as simple as possible.

I divide into 2 parts. Part 1 is installation of Boot Lamp Cover. Part 2 is getting the correct wiring for the boot.

Things you need to get ready to have OEM Honda Insight boot light

1) boot lamp cover Part number 34265-SFE-003.  Another cheaper version part number 34261-S5A-003
2) wiring 5 meter
3) cable ties
4) led bulb ( T10 version )
5) Pen knife
6) Scissor & Black tape
7) Wire coupler (optional)

Difficulty : 3 out of 5
Time spent : 5-6 hours.

Part One : Installing Boot Lamp Cover

Step 1 : Open the boot and locate the plastic cover on left side. Use a flat screwdriver cover with cloth to pry out the plastic cover on the top left corner. There is hole for the purpose to remove the plastic cover.

Step 2 : Check the cover and turn opposite way and see there is a shape which you can create the hole. I use a dremel to drill the hole then sand paper to smooth the edge.

Step 3 : Get the boot lamp cover to match with the plastic cover to ensure it fit properly. 


Part Two : Finding The wiring

Step 1 : Get the negative source -> boot lamp source wire. Open the boot and slowly peel out the black protective rubber on right side. Locate Orange Wire.  Try use wire coupler or expose the orange wire with a new wire to connect our boot lamp. You need around 4 meter. Please do not cut the wire.

Step 2 : Once wire is connected, tidy the wire to the boot lamp location on left side.

Step 3 : You need to dismantle the boot cover, spare tyre, the accessories on the bottom section. Slowly peel the plastic cover one by one .


Step 4 : Locate the positive wire ( Pink color ). Just like step 1, get another wire ( 1 meter ) to link with the positive wire.


Step 5 : plug the wire and connect with the boot lamp. To make it simple, put the pink color on top and orange color on the bottom. Later you shall know which is Positive and which is negative.

Step 6 : Take the boot lamp plastic and connect it with LED light

Step 7 : Test with the LED and the wire connection.

Step 8 : If everything is alrite, assemble back the boot compartment and the boot light is completed.