my 3000+ needs 1.95v

my max to manage 2.0v at 2.6ghz running at windows stable, but not for gaming. wired....

but now jus onli use barton for surf net

Ah Sorry guys :shame: busy busy.
Haha updating complete.

if there are any mistakes let me know ya !
Cheers!

How far (temp) do you all dare to push (for the 1hr prime thing)? 65? 70?

haha for me..i already start feeling uneasy when it reaches 58..so i do all i can to keep temps under 60

This post has been edited by gr2000: Oct 26 2005, 06:47 PM

hey guys new here in OC lolz this is mine just oc
AMD XP 2000+ @ 2.07
RAM Apacer 512
Advance moudle 512
MB:asus a7v600-X
Cooling:Thermalright SLK800-A+DeltaFFB0812EHE
Unlocked version~


This post has been edited by Benjamin1213: Oct 29 2005, 02:52 PM

^^
That's a T-bred.
BTW, did u get my PM?

lolz yeah it is a tbred =P but still under AXP Marh =P
yeah receive ur pm adi.

just came back from my hometown a few days ago, i checked out this computer shop...they still sell Unlocked AXPs!!!!!

This post has been edited by gr2000: Nov 7 2005, 04:20 PM

Can a barton 2500+ run at 3200+@200FSB table for rendering 3D/else? and at what Vcore? I'm using Abit AN7 mobo.

some good stepping no need to raise vcore to run at 200mhz

how to know if it's a good stepping or not? Just rise theFSB to 200mhz?

yes, just raise your fsb to 200 at default vcore.

ya if can boot n load into bios, congs, u r halfway success...

run primestable 95 for more than 3 hours, if no error, u r done!

btw make sure ur ram how high can go 1st using memtest86, if found 200mhz no problem, only jack up ur proc to 200fsb...

My ram clock out at 338 T-T old ram, nvm, i think i just put FSB divider... to 333 thanks alot.

sure can 166 to 200 baru naik berape jer!!!

Bump with a screenie.

Help, I can't make my 2500+ oc to 3200!! It just hang on reboot.
I try to rise the FSB from 166 to 200 @1.685V but it won't work. Anyone any suggestion?

What mobo r u using? If u r using nF2 chipset, u may start like 11x170.....11x180 or so don't suddenly jump to 11x200 (who knows.... maybe your rams can't run 200MHz?) BTW, try with loose timings when u want to find the max cpu frequency with 1:1.

yup, nforce 2, just now try clocking increase by 5, clock out at 175, won't go any higher. my ram max out at 342, nonw i run only 290 i used 5/4