yo dato how ur proc working? the highest imc speed u can get how much aye? its seem mine cannot go any above 2.7ghz if da ram speed ovah 16xxmhz

here some mod been made

Guys, how did you all attach the fans over the vrm heatsink??

diy bro...like bro ah khoo using ram cooler also can...like me.. screw into HS just make sure there's a gap between the fan and HS

hi where to buy original AM3 HSF? & how much?

the original came from amd i dun know got sell...but 3rd party low profile cooler same like stock HS got sell at local computer shop cost below rm50

thanks bro, actually my original HSF & box is missing & now thinking 1 day if wanna sell my processor must come with original HSF rite? or got ppl will buy the processor alone..

my board seems like has issue.. so cant really test.need to change to old board then only can
wahh.. u no sayang ur heatsink ka screw like that. will scratch the heatsink kan? but good thing is 2 fans now

well.. i dont think buying new stupid heatsink will be a good idea..it will only add up the cost. and most ppl wont pay extra.
if buy quite good heatsink. then it will be diffrent. ppl might pay extra bucks as the heatsink is better then the stock

and if got anyone saying " u need the original heatsink for rma purpose". just say no need.

ashelly no need to screw d fan onto d heatsink. just need to cable tie or use normal wire tie to hang d fan over d +12v eps cable (8 pins) will do.

not really see the scratches... coz it screw on bottom part of HS...bro ah khoo what do u mean tie on to the 12+ cable?

This post has been edited by fatalynx05: Jul 21 2011, 08:56 PM

hanging from the 12v cpu power pin, cant imagine

d 8 pins cable which connected to d mobo bro...

huhu i tried but the fan always shaking due to hi air flow...this is a pair of nidec fan
btw i finally get to run 3.1ghz on nb, maybe iam noob so a bit hard to get it stable huhu... my ddr kinda act weird on speed above 16xx
tried 18xx speed but the ram only detect 1 pcs only another 1 not active (even loose timing )

nice clock & time on d pi bro...

btw, what ram is that? 1700 @ CL5??? awesome!!!

my old lousy ram lah bro ADATA , i also done cl 4 on this ram... i posted it under LYN DDR3 oc database

This post has been edited by fatalynx05: Jul 21 2011, 11:45 PM

no wonder... hyper inside goodin...

not quite hyper bro the ram kinda like 18xx n below freq... over it and its meragam

hehe just scared the price is more lower if not come with HSF

usually like that...

Hey guys, im trying to OC my Phenom2x3 710, i have OC-ed it to 2.8Ghz without any problem, however when i hit 2.9Ghz...my windows wouldnt boot up anymore. I tried increasing the Cpu voltage by +0.050 but still not booting up. I want to know whether the problem was caused by insufficient voltage or my mobo wasnt good enough for it.

try increasing more