Welcome Guest ( Log In | Register )

105 Pages « < 55 56 57 58 59 > » Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket AM2&AM3 Overclocking V25, 990FX, Bulldozer!

views
     
makaroni
post May 6 2012, 08:33 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(lengchai86 @ May 5 2012, 10:02 PM)
poison advice : change to other ram. winova xtune 1600CL11 1.5V can set 1600 CL7 @ 1.5XVdimm or 21XX CL9 1.65Vdimm  rclxms.gif
or you can try corsair dorminator.

btw don't go over 1.7Vdimm. not suitable for 24/7  sweat.gif
er.. you can try increase your cpu-nb clock. btw you using divider 1600 for the ram or you increase the FSB?
*
im using divider for the ram, so what do u think, this is the far my ram can go? its already reach the limit?
lengchai86
post May 7 2012, 02:08 AM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



consider the ram oredy reach its limit. btw why not you increase your cpu-nb clock,
still can gain performance apart of increase the ram speed.. if you are using BE proc,
try increase the cpu-nb speed. else, try list your spec here. hard to suggest...

put your rig spec on your siggy

This post has been edited by lengchai86: May 7 2012, 02:09 AM
k1forc3
post May 7 2012, 04:53 AM

New Member
*
Junior Member
6 posts

Joined: May 2012


this is my old sreenshoot with my clone id smile.gif

i need ur correction if i'm wrong smile.gif

user posted image

4ghz on air

This post has been edited by k1forc3: May 7 2012, 04:56 AM
makaroni
post May 7 2012, 10:23 AM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(lengchai86 @ May 7 2012, 02:08 AM)
consider the ram oredy reach its limit. btw why not you increase your cpu-nb clock,
still can gain performance apart of increase the ram speed.. if you are using BE proc,
try increase the cpu-nb speed. else, try list your spec here. hard to suggest...

put your rig spec on your siggy
*
below is my siggy thumbup.gif
i didnt know Corsair Vengeance only can go this far, then no different with value ram lol sad.gif


This post has been edited by makaroni: May 7 2012, 10:32 AM
lengchai86
post May 7 2012, 12:18 PM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



QUOTE(k1forc3 @ May 7 2012, 04:53 AM)
» Click to show Spoiler - click again to hide... «

*
1.37Vcore @ 4.0Ghz speed is my dream rclxms.gif very low temp there. aircond room? hmm.gif

QUOTE(makaroni @ May 7 2012, 10:23 AM)
below is my siggy  thumbup.gif
i didnt know Corsair Vengeance only can go this far, then no different with value ram lol  sad.gif
*
corsair dorminator is a flex.gif
you can increase the fsb so the cpu-nb will increase as well. its the best if you can get the proc at
3.6Ghz above and the cpu-nb clock near 2600Mhz nod.gif ram @ 1600 CL9 is ok edy.

makaroni
post May 7 2012, 12:39 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(lengchai86 @ May 7 2012, 12:18 PM)
1.37Vcore @ 4.0Ghz speed is my dream  rclxms.gif  very low temp there. aircond room?  hmm.gif
corsair dorminator is a  flex.gif
you can increase the fsb so the cpu-nb will increase as well. its the best if you can get the proc at
3.6Ghz above and the cpu-nb clock near 2600Mhz  nod.gif  ram @ 1600 CL9 is ok edy.
*
the max stable i can oc my unlock 4 core processor is 3.4Ghz, but if without unlock can get 3.6Ghz, but for now im just using stock setting, but at 3.4Ghz setup my ram option will be 90+, 12++, 15++ & 17++, its look like when i oc my processor & ram will follow too, thats are the different between BE & non BE processor sweat.gif

This post has been edited by makaroni: May 7 2012, 12:43 PM
lengchai86
post May 7 2012, 12:56 PM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



QUOTE(makaroni @ May 7 2012, 12:39 PM)
the max stable i can oc my unlock 4 core processor is 3.4Ghz, but if without unlock can get 3.6Ghz,
but for now im just using stock setting, but at 3.4Ghz setup my ram option will be 90+, 12++, 15++ & 17++,
its look like when i oc my processor & ram will follow too, thats are the different between BE & non BE processor  sweat.gif
*
that was the way we OC our proc. increase the fsb, ram, HT link and cpu-nb all will increase.
thats why need to set the HT link below 2Ghz, set the ram at lower divider but remain the
proc clock and cpu-nb at highest clock. BE proc, we can increase the cpu multi and cpu-nb speed
by just increase the cpu-nb multi, much easier.

i still using FSB on BE proc so that can get various speed ram. nod.gif
makaroni
post May 7 2012, 01:15 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(lengchai86 @ May 7 2012, 12:56 PM)
that was the way we OC our proc. increase the fsb, ram, HT link and cpu-nb all will increase.
thats why need to set the HT link below 2Ghz, set the ram at lower divider but remain the
proc clock and cpu-nb at highest clock. BE proc, we can increase the cpu multi and cpu-nb speed
by just increase the cpu-nb multi, much easier.

i still using FSB on BE proc so that can get various speed ram.  nod.gif
*
if set ram to lower divider example 800 - 1333 & push cpu-nb to highest clock then ram speed will increase?
k1forc3
post May 7 2012, 01:54 PM

New Member
*
Junior Member
6 posts

Joined: May 2012


QUOTE(lengchai86 @ May 7 2012, 12:18 PM)
1.37Vcore @ 4.0Ghz speed is my dream  rclxms.gif  very low temp there. aircond room?  hmm.gif
corsair dorminator is a  flex.gif
you can increase the fsb so the cpu-nb will increase as well. its the best if you can get the proc at
3.6Ghz above and the cpu-nb clock near 2600Mhz  nod.gif  ram @ 1600 CL9 is ok edy.
*
no biggrin.gif

» Click to show Spoiler - click again to hide... «


3,9ghz 1,3v smile.gif

spek:
-phenom II x2 555be @4ghz
-jw a870t-uc3
-team xtreme dark 4gb @1333 cl7
-wd blue 500gb + 80 gb sata
-vantec aero flow fx 12
-sapphire 5850 extreme edition
-fsp hexa 500w
-samsung 22x
-infinity g-50

This post has been edited by k1forc3: May 7 2012, 01:57 PM
makaroni
post May 7 2012, 02:12 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
this is stupid question i think, which one good, mix Corsair 2x4GB + Kingston 2x1GB total 10GB or just use corsair 2x4GB total 8GB only?
k1forc3
post May 7 2012, 02:22 PM

New Member
*
Junior Member
6 posts

Joined: May 2012


QUOTE(makaroni @ May 7 2012, 02:12 PM)
this is stupid question i think, which one good, mix Corsair 2x4GB + Kingston 2x1GB total 10GB or just use corsair 2x4GB total 8GB only?
*
used only 2x4gb more better than mix 2x4gb + 2x1 because it make bottleneck...smile.gif
n i think this memory can't run dual chanell...CMIIW
so kingston don't be used... smile.gif n bring to me biggrin.gif doh.gif

This post has been edited by k1forc3: May 7 2012, 02:26 PM
makaroni
post May 7 2012, 03:16 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(k1forc3 @ May 7 2012, 02:22 PM)
used only 2x4gb more better than mix 2x4gb + 2x1 because it make bottleneck...smile.gif
n i think this memory can't run dual chanell...CMIIW
so kingston don't be used... smile.gif n bring to me  biggrin.gif doh.gif
*
its run dual channel even if i mix this 2 pair thumbup.gif
u want buy my Kingston? brows.gif
lengchai86
post May 7 2012, 04:18 PM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



QUOTE(makaroni @ May 7 2012, 01:15 PM)
if set ram to lower divider example 800 - 1333 & push cpu-nb to highest clock then ram speed will increase?
*
the ram speed + cpu-nb speed will increase when you increase the fsb a.k.a HTT
the purpose of lowering the ram divider is to achieve higher proc clock nod.gif
so the ram wouldn't be the culprit of any unstable issue because oredy know your ram limit

QUOTE(k1forc3 @ May 7 2012, 01:54 PM)
no biggrin.gif

» Click to show Spoiler - click again to hide... «


3,9ghz 1,3v  smile.gif
» Click to show Spoiler - click again to hide... «
if not in the aircond room then your system has a very low temp there rclxms.gif

QUOTE(makaroni @ May 7 2012, 02:12 PM)
this is stupid question i think, which one good, mix Corsair 2x4GB + Kingston 2x1GB total 10GB or just use corsair 2x4GB total 8GB only?
*
just use 2 identical ram --> 4GbX2 Corsair

This post has been edited by lengchai86: May 7 2012, 04:21 PM
k1forc3
post May 7 2012, 07:36 PM

New Member
*
Junior Member
6 posts

Joined: May 2012


QUOTE(makaroni @ May 7 2012, 03:16 PM)
its run dual channel even if i mix this 2 pair  thumbup.gif
u want buy my Kingston?  brows.gif
*
but i no have money to buy it brows.gif

QUOTE(lengchai86 @ May 7 2012, 04:18 PM)
the ram speed + cpu-nb speed will increase when you increase the fsb a.k.a HTT
the purpose of lowering the ram divider is to achieve higher proc clock  nod.gif
so the ram wouldn't be the culprit of any unstable issue because oredy know your ram limit
if not in the aircond room then your system has a very low temp there  rclxms.gif
just use 2 identical ram --> 4GbX2 Corsair
*
thank you smile.gif

makaroni
post May 8 2012, 10:39 PM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
fuh no regret bought this 8GB ram, i do editing in CS5 with multi threaded picasa & photoscape, i open window task manager & ram usage is 5GB, WTH rclxub.gif


Added on May 10, 2012, 8:49 pmtry to reach 1800Mhz rclxms.gif
but only in CL11 sad.gif

user posted image

user posted image

This post has been edited by makaroni: May 10 2012, 08:49 PM
lengchai86
post May 11 2012, 05:06 AM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



just use the highest speed @ CL9. don't go over CL9. else, find other ram
makaroni
post May 11 2012, 08:03 AM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
QUOTE(lengchai86 @ May 11 2012, 05:06 AM)
just use the highest speed @ CL9. don't go over CL9. else, find other ram
*
i think need to find other ram as im pretty sure CL11 is the far that this ram can go with 1800..the only speed i can manage to get CL8 is 1100 rclxub.gif , feel disappointed Corsair Vengeance performance only this kind of level..

ah_khoo
post May 11 2012, 10:12 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.


QUOTE(makaroni @ May 11 2012, 08:03 AM)
i think need to find other ram as im pretty sure CL11 is the far that this ram can go with 1800..the only speed i can manage to get CL8 is 1100  rclxub.gif , feel disappointed Corsair Vengeance performance only this kind of level..
*
vengeance is like low end gskill ripjaws x series, oc mileage is kinda limited. but to be fair to 'em, their pricin are quite close to value ram so one better dont expect too much. gone were d days where we pay peanuts & get good stuffs, like those old skool kvr (with quite oc'able chips) days. smile.gif


makaroni
post May 11 2012, 10:42 AM

Getting Started
**
Junior Member
111 posts

Joined: Apr 2011
so winova is a good ram to oc? feel like want to buy this ram
lengchai86
post May 11 2012, 10:52 AM

P90
******
Senior Member
1,162 posts

Joined: Oct 2007
From: 8.8.4.4



QUOTE(makaroni @ May 11 2012, 10:42 AM)
so winova is a good ram to oc? feel like want to buy this ram
*
not a super good but for me, its a good choice as its cheap.
review by abam ah_khoo http://forum.lowyat.net/topic/1789845/all

105 Pages « < 55 56 57 58 59 > » Top
 

Change to:
| Lo-Fi Version
0.0296sec    0.37    6 queries    GZIP Disabled
Time is now: 27th November 2025 - 05:53 PM