Well I don't really know how much is 18 inch rims, standard price for 18 inch rims consider cheap to me.

This post has been edited by Daniel520: Jul 15 2011, 03:17 PM

Wah...Silver Devil also became God of Gambler ar??

daniel,
go for 19 then..our car can take up to 20.

I scared the car too heavy, the engine wont be able to pick up as fast than. Coz now I'm feeling my inspira is dam wobbly its swinging side to side when cutting cars in high speed. Feel dam dangerous when driving this car. Planning to change 18 inch rims, full set sports bar, and (Future) mod to PP evo X body. Now I just feel the car dam dangerous when driving at the speed above 120. I scared 19 too heavy when mod in future the car will be super heavy that time need to change engine edi.

If budget permits, buy original 18" rims, and adding some bars do help decrease the wobbly feel at high speeds, like front struts. Can do some self-poison at http://www.ultraracing.com.my/Catalog.asp?...=Inspira&page=1

haha, get good light ones and yes of course good reason to mod engine and play performance. less kaki/owners mod performance here

Changing rims won't affect the handling of the car at all. Lower profile tires maybe. First check tire pressure (30-35, anything above makes car feel floaty and steering not able to hold straight), add front top strut bar, add spring helpers (rubbers) to minimise body roll. All mentioned mods wun cost you above rm400... You can spend more for lowered springs or adjustables if $$ permits.

Stock car itself is good enough, could it be you weaving in/out of traffic at high speeds?

---

Added on July 15, 2011, 3:37 pmIf I am god of gambler... I wun be driving a silver surfer... I will be flying one...


This post has been edited by XCInspire: Jul 15 2011, 03:37 PM

O.o thanks for the link XD really kena poison dy gg XD hahahax.

Its a family sedan... heh heh... what mod?

LoLx Yeap but I plan to spoil this mivec engine only change to evo 6 engine. XD Temporary just the wobbly inspira makes me afraid of going any faster.

---

Added on July 15, 2011, 3:48 pmbut changing rims do helps, it makes your car stick to the ground righT? Yesterday when I was driving around 110km/h or above when cutting cars the car was swinging side to side. I was like WTF!!!

The tyre pressure the lower the more grip it gives?? so 30 would be the best?

Yes planning to add strut bars, how many percent does it improves handling ???

Inspira stock it has the power but the handling wise consider quite bad coz experience a few times this car like the butt swinging off when turning. Lolx yes weaving in and out alot of cars but not traffic jam hahahax ><

This post has been edited by Daniel520: Jul 15 2011, 03:49 PM

nope,i thought u wanted to get from dm3,so removed from list

so now u confirm want or not one?

haha, u sure family sedan like this cant be power up?
hahha, alot to do to bring the beast out further

Guys, not sure if it is appropriate to post this here. I have a lancer ralliart lip for sale. I got it last month from rainbow but because my multilevel carpark is a little stiff and narrow my wife complaint. Got it for 350MYR. Condition wear and tear.. material double enforce FRP (according to rainbow) Letting go for 100 MYR only. Thanks.

Picture

For manual version can add turbo but so far nobody seem to have done it. For 2.0 cannot add turbo due to that cvt gb... low boost ok but whats the point? Other mods like exhaust and open pod not much improvement. So this is why this Ins thread seems mod free... and at times boring.

haha, ya Xc, sudah power enuff no need to mod also rite?

The only 2.0 can mod is evo 6 engine. Evo 6 is not manual engine rite?

Changing to light rims improve pickup. Changing to better rubbers/tires make it stick better, not the rims. Changing to lower profile will improve cornering as less tire wall flex. But if you get 18" and invest in cheap rubbers, pointless. A good 18" rubber sets you back RM600-1000 per tire...

When I first got the car, tire pressire was 43 psi and I could not keep it straight (due to tire over inflated). Reducing it to 33 helped. Too low and ur FC suffer.

I cannot count the percent, I don't think anyone can place a measureable % to it, top strut bar itself improve turning to be a little firm. Not advisable to change rear antiroll bar else your car will be tail free (lose grip of rear a common issue with lancer). When the car is too firm, something has to give.. the tires...

Inspira body rolls a lot but you can almost never get it to lose its tail. Its excessive body roll you are experiencing. Seems to me you are another daredevil driver...

---

Added on July 15, 2011, 4:16 pmWhy wanna throw away the new 4B11 engine for a recon evo6 engine? Might as well get a recon evo6 car itself, everything is built in including AWD with limited LSD...and the HP...

---

Added on July 15, 2011, 4:19 pmDM3, power is never enuf..


This post has been edited by XCInspire: Jul 15 2011, 04:19 PM

Means I should get 18 inch rims with good tires what tires do you recommend?? currently ours are using continental rite? RM 1,000 to 6,000 dam for each == GG I think I can get 2,000 ++ each for 18 inch ones not sure need to check again.

I will look into the strut bar stuff again need to know how much handling it improves atleast I wont go wobbly and end up lose control den ok edi.

LoL I think I'm consider one of the dare devil but not often depends on my mood i guess. Bad mood = Petrol goes down fast lolx.

---

Added on July 15, 2011, 4:22 pmWhen the 4B11 engine dies, you have to replace it with another one seems like evo 6 engine is the only engine fits into 2.0 slots perfectly. XD

This post has been edited by Daniel520: Jul 15 2011, 04:22 PM

Think you can get 18" rim with rubbers at abt 3K... but those are replica rims and dunno what rubbers they will give you. You can google what tires are good. For stock car, CC5 is good enough but not for high speed as I don't think it aquapans very well in wet. Bridgestone, Michelin or Pirelli... U hv to see the speed rating for the tires and reviews. If you plan to daredevil, the equipment has to match.

For struts, pls understand what each braces/strut do before you invest. Google for overseas lancer sites for tips.

daniel,

ya why go for evo 6, when u can have evo X engine?
can use the cam shafts and crank shafts frm evo X also.

XC,

yups neva enuff power, so lets mod hahahaha