USB host controller ..

Picture "UHC_Constellation_1" = All in one


Picture "UHC_Constellation_2" = Only for using one usb device (mass storage, or mouse, or Keyboard).


Picture "UHC_Constellation_3" = For using more as one usb device on a Power USB Hub, but no mouse/keyboard.



more info HERE

My tab P1000 ram 512mb, i want to upgrade to 1gb can or not.

Can, buy a new Galaxy Tab that has 1gb ram and try your best to put it in your P1000.

No you can't.

if can upgrade like a PC, sure low end specs tablet sell like hot fried banana..

agree with this

lol

The Galaxy Tab is powered by the Samsung S5PC110A01 Multimedia Applications Processor.

Samsung takes advantage of the Package-on-Package architecture by embedding 8Gb of MLC Flex OneNAND, 1 Gb of OneDRAM and 3Gb of Mobile DDR into the processor.

Since the RAM is embedded inside the processor, you can upgrade the RAM only by replacing its processor.

However, its storage is a SanDisk SDIN4C2-16G (MLC NAND Flash 16 GB), which is another chip on the motherboard.


Reference:
http://www.ifixit.com/Teardown/Samsung-Gal...Teardown/4103/2

thanks, very good info

Need expert help here. Newbie in flashing custom rom.


Here the problem when I flashed overcome kernel, my tab did not restart and stuck at download mode. Not sure the kernel already flash or not. What should I do? Not dare to turn of the tab

u flash using odin? flashing kernel not same as flashing rom.. im afraid u accidentally tick at "Re-partition" during flashing kernel?
if so.. more safe u flash stock rom back using odin..

Yes, using Odin. I did not tick the "Re-partition". I follow the instruction properly. The Odin show it's stuck at "zImage" for long time. Found out the kernel file actually corrupted.

I redownload again and use Odin to flash the kernel. This time it's stuck at "Setup connection". Any idea what should I do to solve the problem?

u want to flash Overcome Kernel v4.0.0? which link u use?
try this http://www.rosanoscorner.com/p1000/downloa...rnel_v4.0.0.tar

Can I restart the tab to download mode? Seem the Odin is not moving. It's still stuck at Setup Connection. Afraid if the tab is bricked

After restart, the tab show phone--!--computer sign. Turn of and on with power + vol down button still showing the same sign. Sigh.

This post has been edited by azonx: Mar 4 2012, 08:29 PM

soft brick... refer to page one for how to fix solution...

Successfully unbrick my tab using one-click unbrick tool. Simple to use it :-)

This post has been edited by azonx: Mar 5 2012, 10:35 AM

then i recommend u to try ICS.. posted by khalpowers.. superb nice.. smooth & stable for daily use

I wish to but currently the ICS does not support TV out yet. Am I right?

hi all,

wanna ask u 1 question about custom kernel,

can i install custom kernel like overcome kernel on my galaxy tab with standard rom ??

and how to install the kernel ??

im new in android

yes u can..
use Odin to flash the kernel (via pc).. u cn check the step at 1st page or at overcome thread..