Outline ·
[ Standard ] ·
Linear+
Sempron64 2500+ , 2800+ OC tests
|
zombie24
|
 Feb 21 2006, 03:00 AM
|
|
QUOTE(soulfly @ Feb 20 2006, 06:51 PM) You don't need to paste the whole thing, just say Sempron 2600+ is enough. Refering back my previous post, enable or disable the CnQ in BIOS doesn't make any difference because Sempron 2500+, 2600+ and 2800+ does not support it. Cool n Quiet somehow is supported by Sempron 3000+, 3100+, 3300+ and 3400+. To make full use of it, the BIOS function must be enabled and the cpu driver must be installed. ok sori 4 posting 2 much...hehe...err u guys can delete it or should i delete...hehe. |
|
|
|
|
|
wtm0325
|
Mar 17 2006, 12:50 AM
|
|
|
|
|
|
|
|
|
SUSMalaysian
|
Mar 17 2006, 01:10 AM
|
|
|
wat ram he using and mobo also?
|
|
|
|
|
|
low yat 82
|
Mar 17 2006, 02:44 AM
|
|
|
aikk... jus curious y 448mb...
|
|
|
|
|
|
wtm0325
|
Mar 17 2006, 03:10 AM
|
|
|
this is the user spec B)
Naked 2800+ Sempron64 @ 2.84GHz Max OC 3.07GHz
2X512MiB OCZ EL DDR PC-4200 Platinum
BioStar TForce 6100/Chipset Vmod.
2XNEC 3540A DVD/RW
Wing-spring-bolt mod XP-90 w/120mm fan
520W. SkyHawk PSU 3.3V. VSense mod
2X120GiB Hitachi Deskstars/TinyXP PRO
|
|
|
|
|
|
low yat 82
|
Mar 17 2006, 03:45 AM
|
|
|
does naked means no hsf? huhhuh... kau kau...
seems biostar tforsce is ok for oc...
|
|
|
|
|
|
wtm0325
|
Mar 17 2006, 04:37 AM
|
|
|
 naked means naked women  nah it means no IHS lar |
|
|
|
|
|
ggoo
|
Mar 18 2006, 10:24 AM
|
|
|
hey..im curenly using this spec
sempron64 2500+
asus K8N4-E
kingston value ram 512 mb
tsunami 480 watts
i dont know much about oc...but at the bios...i set my memclock from 200mhz to 166mhz...and the htt i put to 250...i dont know wether can go more anot?? my temperature is already at 40 with stock cooling i did all these already what sumore should i do?? my friend said i should do prime test and memtest...
|
|
|
|
|
|
ggoo
|
Mar 18 2006, 10:26 AM
|
|
|
hey..im curenly using this spec
sempron64 2500+
asus K8N4-E
kingston value ram 512 mb
tsunami 480 watts
i dont know much about oc...but at the bios...i set my memclock from 200mhz to 166mhz...and the htt i put to 250...i dont know wether can go more anot?? my temperature is already at 40 with stock cooling i did all these already what sumore should i do?? my friend said i should do prime test and memtest...
This post has been edited by ggoo: Mar 18 2006, 10:30 AM
|
|
|
|
|
|
sidewinderz
|
Mar 18 2006, 10:29 AM
|
|
|
yea....can go summore...2500+ should be able to hit 2.4ghz with no problems
|
|
|
|
|
|
ggoo
|
Mar 18 2006, 10:35 AM
|
|
|
whats the normal temperature if i can hit 2.4ghz.. cuz im using a chiplak psu...i scared something goes wrong...
|
|
|
|
|
|
wtm0325
|
Mar 18 2006, 12:50 PM
|
|
|
uhmm normal temp? if u r not increasing voltage, it should be the same as the stock speed temp
|
|
|
|
|
|
low yat 82
|
Mar 18 2006, 01:13 PM
|
|
|
QUOTE(ggoo @ Mar 18 2006, 10:26 AM) hey..im curenly using this spec sempron64 2500+ asus K8N4-E kingston value ram 512 mb tsunami 480 watts i dont know much about oc...but at the bios...i set my memclock from 200mhz to 166mhz...and the htt i put to 250...i dont know wether can go more anot?? my temperature is already at 40 with stock cooling i did all these already what sumore should i do?? my friend said i should do prime test and memtest... ermm.... like wat ive said b4, u can try out d 133memclock.... btw, i hav heard that tsunami psu is quite ok...although i never use it...  one of d forummer can oc sempron 2800+ 50% witouh causing prob by d psu. well, how ab ur nf4 chip? i heard that u got heat prob wit it... |
|
|
|
|
|
ggoo
|
Mar 18 2006, 04:55 PM
|
|
|
yea the chipset heatsink is very hot...the chipset fan is spinning at 6000+ rpm... at cpu-z my cpu voltage is 1.3++V when i use my ai booster..the cpuvoltage is 1.600V how does it happen? This post has been edited by ggoo: Mar 18 2006, 04:56 PM Attached File(s)
gg.bmp ( 688.55k )
Number of downloads: 9
oo.bmp ( 1.01mb )
Number of downloads: 6 |
|
|
|
|
|
low yat 82
|
Mar 18 2006, 07:31 PM
|
|
|
then u need to set ur ai booster to default vcore... btw.. there got limit to b patuhi for d fsb(at ur ai booster)... i dunno ab nf4, but mine shud maintain at 700-900fsb... hope other can giv u detail for d limit for ur nf4... edited: ur system is quite hot i can say... coz mine max onli at 40c... that means u got bad flow casing.. This post has been edited by low yat 82: Mar 18 2006, 07:33 PM |
|
|
|
|
|
ggoo
|
Mar 19 2006, 05:13 PM
|
|
|
hmm but when i increase my htt the fsb will go up...then how? ok i just set everything to normal...my speed is at stock speed 1.4ghz and my memclock is at 133mhz...then the reading of the fsb at my ai booster shows 800fsb....then how to know my limit??
and err...one more thing...how to change my ltd?
memory voltage is ddr voltage right??
This post has been edited by ggoo: Mar 19 2006, 05:23 PM
|
|
|
|
|
|
low yat 82
|
Mar 19 2006, 06:52 PM
|
|
|
QUOTE(ggoo @ Mar 19 2006, 05:13 PM) hmm but when i increase my htt the fsb will go up...then how? ok i just set everything to normal...my speed is at stock speed 1.4ghz and my memclock is at 133mhz...then the reading of the fsb at my ai booster shows 800fsb....then how to know my limit?? and err...one more thing...how to change my ltd? memory voltage is ddr voltage right?? yup memory voltage is ddr voltage.. yup, when u increase , it certainly will go up, i think jus keep in d range of 700-1000.. ldt i think can onli set it at bios.. set it to 3 or 3.5.. d default shud b 4.. |
|
|
|
|
|
superpc
|
Mar 21 2006, 06:51 PM
|
|
|
QUOTE(sidewinderz @ Mar 18 2006, 10:29 AM) yea....can go summore...2500+ should be able to hit 2.4ghz with no problems amm, not much ppl so lucky got ns batch le, ns batch can hit wifout prob, but not every chip can wo, last time my 2500+ onli get to 2.3 highest argh but wif ns mobo and som other ns important component, should hav no prob for most sempron |
|
|
|
|
|
sidewinderz
|
Mar 21 2006, 08:35 PM
|
|
|
hmm..with my current processor, i can hit 2.4ghz at stock vcore with no problems..now running at 2.66ghz
|
|
|
|
|
|
zx7177
|
Mar 21 2006, 08:40 PM
|
|
|
@sidewinderz
care to share your steppings ?
|
|
|
|
|
Quote
0.0243sec
0.34
6 queries
GZIP Disabled