0527UPMW....haha....

you can get my super-pi timings and my current clockspeed here...

http://forum.lowyat.net/index.php?showtopic=242325&st=20

http://forum.lowyat.net/index.php?showtopic=105812&st=660

ahh

k , thanks

do you think by changing my heatsink and cooler will increase my OC by a relatively good margin ?
hand still itchy to overclock higher

hmm...you can try bumping up your vcore cayse by changing heatsink, it will result in a lower temp ...but the temp difference between stock heatsink and third party heatsink is bout 5 degrees at max...

cause mine liek topped out at 340

but forgot to take screenie

got about 33.7 seconds on pi 1m

and the other day , kicked the htt up to 345 , and cannot boot at all liao , now mobo gonan go for rma

haha....why clock so high??lol....now mobo gotta send for RMA...

its always good to provide good cooling for your OC parts....

well , its my first time overclocking

so main hantam lorr

computer only worked for 2 weeks , then kaput liao

hehehehe....cant imagine the way you hantam...its rare for DFI board to die tat fast...lol...

zx7177 and sidewinderz..
u guys using infenion ram..

why i can only achieve 255fsb while using 166mhz divider?
i thought it's less than 210mhz ram..
but when i set 1:1 easily can get 235 with 2.5-3-2-6 1T same ram timing for 255fsb..
any timing to recommend me?
or should i reduce the HTT

hw much volt u put to it? btw, try put 2.5->3 and also 2 -> 3 ...ermm try much looser timing so u can hit higher fsb
btw, d ldt put 3 or 3.5.

any user here can oc with asus k8n mobo?

i use default volt 2.6.. how far can put 2.8? infineon don't need high volt right?
tried loose timing but still can't go.. that's why put it tight..
hynix like loose timing.. but infineon seems dislike..
i'll try tonight to increase volt and play with the timing again..

This post has been edited by 8tvt: Mar 23 2006, 05:23 PM

y not? jus that this mobo onli support u to go till 300fsb and cant change vcore

thne it is better to wait other formmer using d d same ram and dhip wit yar to giv recommendation...

my be-5 tops out at about 230 2-3-2-5 at 2.7v IINM

that's why i'm asking them.. so can guest suitable setting..

my ram 1:1 can got 235mhz @ 3-2-6 with 2.6v and 2.5cl
last night reduce HTT to 3x can go 270 with 166mhz divider same timming..
around 220mhz...

haih... want to squeeze more.. even 2.7v not stable.. still can't manage to get best timming..
play safe at 267fsb with stock cooler.. cpu 2.4ghz so far...

HTT said to be not much diff in OC'ing and performance drops(read in DFI Street IINM)

they said even if you lower it to 1x , it supposedly still feeds enough data to teh processor

yup... before that i'm using 4x cannot boot above 255.. maybe exceeded more than 1020 so not stable... while dropping to 3x the HTT quite mild on 810..

thinking to increase fsb coz i think still got ample place to OC the ram..
just need to be patience to test them...
or maybe must think about cooling part..

minel lucky at 3x still can boot at like 340

cause as i remember , it has to be below 800 or sumthin

This post has been edited by zx7177: Mar 24 2006, 02:57 PM

267*3=801 still got space..
235*4=940 still ok..

that's why want to try again..
340*3=1020 should be ok near the ceiling.. great..

guys... wanna ask something....

Mine is s64 2800+. Using NF8-V2 mobo. maxed out at 332. But the problem is, the temp. Running it 2.4G on 1.475 n temp is idle 35c load is 43c. I'm on wc n vcore is 1.66v. I know its too high ( IIRC 1.7v is official amd max vcore ). The temp still the same, 35c idle full 49c.

2.4G on 1.475v
------------------
Idle = 35c ( mbm/speedfan/everest/abiteq read it as 29c, but i dont trust it. added 5c to mbm reading )

Full Load = 43c ( 8 hours prime )


2.611G on 1.66v
-------------------
idle = 35c ( same as above )
full load = 49c (8 hours prime )

Questions
------------

1. Shouldn't increased in vcore resulting higher temp on idle state?

2. I knew s64 max temp is 69c, so my full load on 1.66v is onli 49c. izzit still safe for me to pump more vcore? let say until the full temp around 60c.

This post has been edited by satanhead2003: Mar 24 2006, 03:40 PM