hey..im curenly using this spec

sempron64 2500+
asus K8N4-E
kingston value ram 512 mb
tsunami 480 watts

i dont know much about oc...but at the bios...i set my memclock from 200mhz to 166mhz...and the htt i put to 250...i dont know wether can go more anot?? my temperature is already at 40 with stock cooling i did all these already what sumore should i do?? my friend said i should do prime test and memtest...

hey..im curenly using this spec

sempron64 2500+
asus K8N4-E
kingston value ram 512 mb
tsunami 480 watts

i dont know much about oc...but at the bios...i set my memclock from 200mhz to 166mhz...and the htt i put to 250...i dont know wether can go more anot?? my temperature is already at 40 with stock cooling i did all these already what sumore should i do?? my friend said i should do prime test and memtest...

This post has been edited by ggoo: Mar 18 2006, 10:30 AM

whats the normal temperature if i can hit 2.4ghz.. cuz im using a chiplak psu...i scared something goes wrong...

yea the chipset heatsink is very hot...the chipset fan is spinning at 6000+ rpm...

at cpu-z my cpu voltage is 1.3++V when i use my ai booster..the cpuvoltage is 1.600V how does it happen?

This post has been edited by ggoo: Mar 18 2006, 04:56 PM


Attached File(s)
 gg.bmp ( 688.55k ) Number of downloads: 9
 oo.bmp ( 1.01mb ) Number of downloads: 6

hmm but when i increase my htt the fsb will go up...then how? ok i just set everything to normal...my speed is at stock speed 1.4ghz and my memclock is at 133mhz...then the reading of the fsb at my ai booster shows 800fsb....then how to know my limit??

and err...one more thing...how to change my ltd?

memory voltage is ddr voltage right??

This post has been edited by ggoo: Mar 19 2006, 05:23 PM